Virtual Pinball: how to install Direct Output Framework

Подписаться 47 тыс.

Просмотров 27 тыс.

50% 1

Episode#30 Custom Virtual Pinball Cabinet Build
In this video I will show you how to install Direct Output Framework (DOF) so you can get all of your new addressable led strips and matrixes flashing away in glorious unison with your frontend and vpx tables! I will also show how to use the config tool on VPUniverse to create your DirectOutputconfig files needed. As usual, this video will have a ton of tips and tricks to get your custom virtual pinball looking absolutely amazing! This stuff seems crazy hard but is actually pretty simple once you have a walkthrough like this. Fear not! I got you!
Link to configtool.vpuniverse.com
configtool.vpun...
These links will take you to the parts I used in this video/filming gear and help support my channel! As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through links in this post.
Inline fuse holders amzn.to/3Y5ZkLa
Terminal Blocks amzn.to/3Rq3Dig
USB Extension amzn.to/3HLPZT6
Fork Spade Terminals amzn.to/3jn7qQw
18 Gauge Red/Black wire amzn.to/3HrLITw
Sainsmart 8 channel relay board amzn.to/3HtVFzJ
Teensyduino 4.0 (not tested but should work) amzn.to/3JWbbrh
PC board mounting feet amzn.to/3WY03g4
Canon M50 camera amzn.to/3x53c3v
Canon M50 AC adapter amzn.to/3JTaMpe
Canon lense filters/protective covers amzn.to/3HO6fBQ
Rode Wireless Go 2 amzn.to/46eIzl2
Smart Phone tripod with cold shoe mount amzn.to/3RSQUEP
GoPro suction cup mount amzn.to/3DSQHvJ
GoPro head strap and quick clip amzn.to/3RMXxIB
GoPro Media Mod amzn.to/3YESM6r
GoPro Light Mod amzn.to/3YfQsml
GoPro Chest Mount amzn.to/3HFlvAU
GoPro Dual battery charger and battery amzn.to/3DV0xNA
Special thanks to Swiss Lizard for making the project and files required for this to happen. Here is the link to his github for this project.
pinball.weilenm...
If you would like to make my vpin cabinet, here is a link to the free plans!
sdssautomotive...
If you design your own, I'd love to see it! Send pics/video to my DM on Instagram!
Special thanks to Michael Roberts for his amazing guide on how to make a vpin cabinet, check it out here. Thanks for the amazing pictures that really help people understand the assembly process.
mjrnet.org/pins...
Copyright ©2016-2021 Michael J. Roberts.
This book is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. In brief, this means that you're free to use, share, and adapt this work for any purpose, without seeking further permission from the author, as long as you give appropriate credit and pass along the same permissions in your adapted material.
If you would like to keep up with behind the scenes info, pictures, and videos, follow us at / way_of_the_wrench
If you enjoyed the video, learned some cool tech tips, I would appreciate it if you could share out the channel on your social media so I can help more people! Thanks for watching and if you hit the post notification bell, you will know when our next videos are out!
Music for this very special episode by :
Thanks to Teknoaxe for his royalty free music for our intro/outro music. Please check out all of Teknoaxe's sweet music tracks!
www.teknoaxe.com
Intro music is Synthwave D
www.youtube.co....
Outro music is Sythwave E
www.youtube.co....
Disclaimer: These videos are intended for entertainment and inspiration. Working in a woodshop, metalshop, or autoshop is dangerous without proper safety and experience. Always seek professional advice and training before using any power tools/machinery. If you have any uncertainty before performing any shop procedure, stop and learn a safe method/technique. Do not attempt anything simply because you saw it in one of my videos. Be smart, use common sense, respect your power tools/machines, and be safe.

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 155

@azhighwayz2310 8 месяцев назад

If I hadn't subscribed to your channel a couple years ago when I found the arcade build videos I definitely would have subscribed after this one. I've been researching building a VPIN cab and I've seen many videos on youtube go through the process. But I've never seen any channel do a step by step absolute breakdown of every single thing necessary to get a professional level VPIN cab up and running with all the bells and whistles. Thank you so much for your dedication to your audience, your dedication to your craft, and most of all your dedication to educating. You're awesome! Never stop teaching us new things.

@wayofthewrench 8 месяцев назад

Thank you very much for the glowing review of my channel, you made my day! I work very hard to make the best videos I can for people so it's always nice to hear from subscribers. I really appreciate it. If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the watch and your support for the channel. Cheers!

@ahaines74 Год назад

Just wanted to say thank you from a VPIN cab installer who did all his configuration way back in 2020.... Your instructions helped me in 3 minutes remember the settings changes I did back many moons ago... In short upgraded to the latest b2s server...... For some reason lost all my DOF/LED for VPX..... Yup seemed "activate plugin on B2S" was now unchecked.... Forgot that 1 small part 3 years ago... THANK YOU SO MUCH for a really great quick nut/bolt video on this topic!!!

@wayofthewrench Год назад

You're very welcome Aaron! Yeah it's the little finicky things that make or break these setups and it's easy to forget something. Glad I could help ya out. Thanks for the watch and hopefully I earned your subscription today. Cheers!

@saltydad2987 Год назад

Great timing, just rebuilt my cab with new boards and I have to program DOF. Thanks for another awesome video. Now to get my solenoids working

@wayofthewrench Год назад

Perfect! Hopefully this video helps you out and makes it easy to set up!

@matt68061 Год назад

Oh man…what timing!! My pinmos/wemos literally arrived in the mail today!! These last 2 videos are AWESOME! SO very helpful. Thank you again for doing this series!!

@wayofthewrench Год назад

You are so welcome! Hopefully these videos will make it a smooth install. Cheers!

@revraccrypto300 Год назад

This series has been awesome to watch, thank you! I struggled getting my matrix to work now for about a week. It would work fine in the arduino tool to test the LEDs but DOF was never able to initialize the COM port I selected. After a week of pulling my hair out I just re-loaded the strip controller file to my teensy and it started to work. Perhaps I didn't do that correct the first time, who knows. Thanks again for the great videos.

@wayofthewrench Год назад

Sweet! Glad you like the content and I'm happy that you got your dof working! Enjoy your vpin!

@fabioaloise 9 месяцев назад

Your series is amazing. Probably the best on RU-vid! I always wanted to build my own 4k 120hz Widebody Virtual Pinball machine. I think I finally found an amazing and very well explained practical guide. I need to study more before I start but your content is just amazing. Thank you very much!

@wayofthewrench 9 месяцев назад

Wow, thanks! Glad you're enjoying the series and feel inspired to start your own vpin. You're gonna love this project! If you have any questions along the way, feel free to ask in the comments. Good luck on your build! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Cheers!

@gutog5801 Год назад

I watch all your videos and they are very instructive, many thanks for what you do to the community

@wayofthewrench Год назад

You're very welcome, glad you enjoyed the series! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Cheers!

@DrHughJohnson Год назад

After watching your videos for awhile, I got myself an AtGames pinball for Christmas. I got a few mods already installed and have all the led stuff just laying around. I love your videos, my bank account hates them though. Wish I had the tools to do it properly like you. Thanks!

@wayofthewrench Год назад

LOL, yeah the toys start to add up a bit but you can spend over time. Cool you started with a vpin. The leds will look great when you're done! Cheers!

@danw3735 Год назад

Machine is looking great. once again quality VP content. Clear and concise for anyone else looking to get into the hobby.

@wayofthewrench Год назад

Appreciate the kind words Dan! Thanks for the watch!

@lifewater989 Год назад

Thank you for making this video series. I am planning on starting my own virtual pinball adventure this summer. I’m trying to decide if I should go full cab or VR pinsim. I’m quite well versed on the software so it shouldn’t be too hard in that respect, but I’ve never built a cabinet before so this series has been a boon. Thanks again!

@wayofthewrench Год назад

If you have the room, go full cab. I'm loving my vpin these days....soo much fun. I might build a stubby vr vpin later too. Good luck on your build!

@scottzimmer8336 Год назад

Another great video - results look amazing. Appreciate you walking through the combo configuration setup as it really enhances the options. Looking forward to a future "how to customize video effects" session and some future pinball configuration stuff.

@wayofthewrench Год назад

My pleasure! Glad you liked the video! Lots of content still to come....cheers!

@tombas7083 Год назад

You're a natural for this virtual pinball journey. Watched a number of your videos and they're all informative and inspiring. I'm in the software phase but I'm basing my eventual build on your cab so I appreciate you WotW! I have Visual and Future Pinball installed and running. I have a computer monitor DMD like yours. Mine is rather bland at this point. Can you point me in the direction to utilize it like yours with multiple things happening on it full screen? Thanks much!

@wayofthewrench Год назад

Thanks TomBas! Yeah I try to make my videos as entertaining and educational as possible so it's easy for people to learn, glad you appreciate it. If you deem me worthy, I'd really appreciate it if you could share my channel on your social media so I can help more people. More stuff on screen? Are you running desktop? 2 screens or 3 screens? Once it is setup, you just have to install the tables and play. Are you talking about the addressable leds? Thanks for the watch!

@tombas7083 Год назад

@@wayofthewrench You are most welcome WotW! My setup is the same as yours (3 monitors in cab mode). All I get on my DMD are the stock images so basically a 4:1 format on a partial screen. The rest of the screen is blank. I see yours is fully populated and animated. I've developed that love/hate relationship with computers as you mentioned in one of your vids. Thanks!

@wayofthewrench Год назад

Yeah they can be tricky sometimes. Good luck!

@Leroys_Stuff Год назад

That’s awesome I like old school pinball but your right I’m starting to think that visual pinball is way cooler

@wayofthewrench Год назад

Sometimes vpin does look and play better! Thanks for the watch!

@brentslane1 4 месяца назад

Working on my rebuild and following a few of your videos... I love your speaker grills and the LEDS behind them... do yo have a link or description of what you purchased to put that together? Thanks!

@wayofthewrench 4 месяца назад

Thanks! Yes there is a video or several on how I did it and all of my parts links should be in my parts video description. Those speaker grills were 3d printed and the STL file link is in that video as well. Hope that helps. Thanks for the watch and your support for the channel!

@erikgallick4570 Год назад

Excellent video and definitely looking forward to the next one already. I may have missed it, but in case I'm not the only one, after testing LED strips you need to load the teensystripcontroller onto your board for it to be addressable.

@wayofthewrench Год назад

Thanks Erik! Yeah you're right, you do have to have the teensystripcontroller on your teensy for this too work. I showed how to do this in the previous video where I generated a cabinet file using Arnoz's Tiny Tools. Thanks for the watch!

@erikgallick2094 Год назад

@@wayofthewrench I figured I missed it somewhere :p

@wayofthewrench Год назад

no worries...I got you!

@CuddaBrown Год назад

Somewhere over the rainbow..lol.. I have to go back over your recent videos again..

@wayofthewrench Год назад

Thought you'd like this! Yeah lots of good videos and lots still to come. Enjoy!

@mikeyfoofoo Год назад

Awesome as always. Very clear. Alt color DMD files are a little finicky sometimes if you are looking for things to make videos on.

@wayofthewrench Год назад

Thanks! Altcolour is on my list for videos to make! Thanks for the suggestion!

@coreyalexander9059 2 месяца назад

Thank you for providing the most user-friendly, simple instructions out there! I have DOF (32-bit and 64-bit) working for all of my tables except one (Tee'd Off). The Table Config list has all of the buttons that I assigned identified for this table, yet when I load Tee'd Off (in VPX or Popper), no DOF effects whatsoever. I even tried to copy/paste another table's config commands to the appropriate lines in Tee'd Off, but no such luck. Do you know of a solution where there is a one-off issue like this one? Thanks in advance for all you do!

@wayofthewrench 2 месяца назад

Hrmm not sure as DOF always work for new tables for me unless it's new and I didn't update my config ( but I have the auto updater for my vpuconfig). Maybe try deleting all teed off files and try again? Update config files from vpuconfig? I'll see if I have time to see if I have an issue as Zi don't have teed off yet on my vpin. Cheers!

@anotti5477 Год назад

Nice Work....I´m impressed....Thanks for sharing your knowledge....

@wayofthewrench Год назад

Thanks! No worries, cheers!

@LinkCherryTree Год назад

Very nice my friend great work love your content.

@wayofthewrench Год назад

Thank you! Cheers!

@jurgen5832 Год назад

Great job, great video. What i would suggest is: the files you extract from the generated zip file from the website dof config_tool put them in the config subdirectory of the dof dir on the harddrive of the VP instead of the main dof folder where you put them It will work both but its less messy if you put them in the config sub_dir (and it makes it more logical as these files are telling something abouf the (individual) config for yor dof. Keep up the good work👍

@wayofthewrench Год назад

Thanks Jurgen! Good suggestion, I'll try that in the future. Thanks for the watch and for supporting the channel. Cheers!

@Farmercist1 Год назад

Invaluable information as always. Hope this comment makes your day as every time i see a video of yours pop up it makes mine!!

@wayofthewrench Год назад

You're welcome JR! Yes, thank you....it is cool to feel like people are excited for my videos. Cheers!

@vectored2fly Год назад

WOW thank you so much for your tutorials and attention to details. I've enjoyed your series immensely. Has anyone reached out to you about Config tool on vpuniverse not allowing them to log into the site. I myself hit a cross roads. I have all steps and programs loaded and ready. However, I'm unable to log into vpuniverse config tool screen. Any suggestions would be greatly appreciated.

@wayofthewrench Год назад

You are so very welcome, glad you're enjoying the series. When I was using that site, it was sometimes hard to login too but usually it would eventually let me in. I'm not sure what the issue is but I would guess it's on their end so not much you can do about it. Thanks for the support for the channel. Cheers!

@johnrobnett8130 10 месяцев назад

Apologies, this is the video I needed to comment on. I'm nor seeing the direct output on the plugins settings list. Does the teensy need to be hooked up for it to be listed? I also read somewhere only have one B2s on your system, through my installs I seem to have a copy in the tables folder and in the Visual Pinball folder and I'm not sure which one it's calling on. Thank you as always

@wayofthewrench 10 месяцев назад

Teensy has nothing to do with the plugin. It uses the plug in but it doesn't make it listed. So DOF can be setup 100% correctly before the teensy is even plugged in. So if you don't have the plugin, you might have missed a step. Keep in mind there are other videos to get cabinet files etc too. Good luck!

@travislogan8880 Год назад

awsome video have followed step by step just cant seem to get it to communicate probably a program or file something simple thanks again for all your hard work

@wayofthewrench Год назад

Thanks Travis. I had someone else tell me the same thing and I told them to go through the video again...step by step. They found they messed up on one little step and then it worked so be careful and don't miss a step or put a file in the wrong spot. Good luck, you got this!

@travislogan8880 Год назад

@@wayofthewrench noticed b4 coming to work while looking at my cabinet file it said toy 1 toy 2 toy 3 and that is not in the copy of your cabinet file so hopefully I will rewrite it to match exactly and maybe it will work I noticed after programming my teensy the orange light flashes on my teensy every 5-6 seconds also only other thing I can think of is what kind of file or app opens cabinet xml and b2s config.server thank you for your response very appreciated been trying to get this to work for a looonnngggggg time 😬😁

@wayofthewrench Год назад

Did you look at my generate a cabinet file and programming teensy video?

@travislogan8880 Год назад

@@wayofthewrench yes definitely

@travislogan8880 Год назад

I work 2nd shift so hopefully around 9 tonight I will have them working thank you again.

@fabianbordon9336 Год назад

Awesome tutorial, has helped alot and I have DOF working in all tables for all toys and LEDs, but for some reason can't get the side rail LEDs working in popper front end like it does in your video when pressing flipper buttons. DOF in popper has been set to true. Any ideas? Thanks in advance. 👍

@wayofthewrench Год назад

Awesome! Glad I could help you out. Here is a link to help ya out with the PinupPopper led issue. www.nailbuster.com/wikipinup/doku.php?id=hardware

@PeterScott-p8c 8 месяцев назад

Thank-you, These are great tutorials. I watched this one and tried to set this up I have made sure the MSI installer wasn't blocked then I installed the DirectOutput. Everything seemed fine I checked that the dll files weren't blocked and set all the executables in the DirectOutput folder to Run as Administator just like the tutorial it seemed like the Direct output would show up in the backglass as an active input but it didn't show up. There must be a way it can be manually registered. I did this on two computers. My desk where I practice setting things up up and my pincab. Both get the same result. What am I doing wrong?

@wayofthewrench 8 месяцев назад

I would go through the video again step by step, if it's not showing up in the backglass as active... something got missed. There is the RegisterDirectOutputComObject.exe that might let you manually register it. Thanks for the watch!

@cpace123 Год назад

Wow. I am so new to this. I am running pinball fx right now, and have a skeleton pinball machine. No cabinet yet just parts kind of working, solenoids,dmd, 39" screen, exciters. I know there are so many options. How far back should I watch your videos. What is out of date? I got my feet wet with the pinball fx, but want to install the virtual pinball also.

@wayofthewrench Год назад

Awesome! Glad you found the channel. As I filmed this series in order of my build, I would highly suggest you watch from the beginning so it doesn't get confusing or you miss put on crucial info not discussed in later videos. You got this! Enjoy the series and your build! Cheers!

@matt68061 Год назад

I got it all set up! Your video was extremely helpful. One issue….when I first boot up (straight to Popper from setup… My addressable LED’s do not turn on…even with a button push. Have to exit the frontend and restart it…then they come on. Any ideas? Thanks for any advice.

@wayofthewrench Год назад

Awesome! Glad I could help ya out! There's about a 10 to 15 second delay until it works and then you need to push a flipper button to start the leds. Other than that, did you do the pinup popper script change to turn on leds like in the video? Thanks for the watch!

@matt68061 Год назад

“Also…gotta ask… what table version of “Aliens” do you have rolling there…dont believe I have seen that?” 😊 Yeah it all works fine…its only on initial boot up. Thinking about delaying Popper as a “task”…

@wayofthewrench Год назад

This is the table I think....www.vpforums.org/index.php?app=downloads&showfile=12406 Not sure why it wouldn't work but then work....maybe something is not in the start up folder?

@Resident-yz3mg Год назад

Hey WOTW I saw that you have extra buttons by the flippers what do you use those for? I'm debating on whether I need to drill holes and pop in some extras. Cheers!

@wayofthewrench Год назад

Those are for tables that have magna saves ( extra flippers that guard out lanes). I now also use them for Pinvol functions as well so I highly recommend you put them in. Thanks for the watch!

@74props 6 месяцев назад

Thank You for your help!

@wayofthewrench 6 месяцев назад

You're very welcome, thanks for the watch! Cheers!

@jeffroman6326 Год назад

Great series, very informative. Has anyone found a work around to dof config tool web page not working?

@wayofthewrench Год назад

Not that I know of. As far as I know you need the VPU Config website to make your file. Maybe someone else will chime in here though. Thanks for the watch!

@jeffroman6326 Год назад

Appreciate this fast response, I'll wait to see if anyone else came across this issue:)

@wayofthewrench Год назад

Did you get though? It goes down all the time

@Mathew69er 4 месяца назад

Hello, thanks for the great tutorial. I downloaded and installed the latest DOF (Windows Setup MSI) according to the instructions. Unfortunately, when I right-click on B2S under Plugins, no DOF appears. What am I doing wrong?? Thank you in advance.

@wayofthewrench 4 месяца назад

Thanks. With these programs, they can be really finicky with how the steps are done . I would suggest watching again and ensure it is done step by step. Also often a windows defender or firewall or folder not unblocked can prevent them from working. Hope that helps. Thanks for the watch!

@crennyw 7 дней назад

For 32 bit and 64 bit, do you duplicate everything in separate parent DirectOutput folders, including registering each version? I did see where that may be an outdated way of doing it and instead installing both 32 and 64 bit versions in the same DirectOutput folder, eliminating the need to maintain 2 sets of files. But currently, I've set up Directoutput and DirectOutput64 and maintaining duplicates. I didn't know whether to register the 64, I saw one guy's video where he said not to do that.

@wayofthewrench 7 дней назад

I have a video on how I upgraded to 64 bit but it may not be the current way or maybe it is. My next build will have the newest baller installer so I'm hoping it's an automatic thing. If not, I'll look into the new way but I know how I did it works. Hope that helps. Thanks for the watch!

@nilspta4620 Год назад

Great work and fantastic videos, thanks. But i realy need help.. Do I absolutely need a teesy to realize the project or is an Arduino Uno enough? If so, how does it all work?

@wayofthewrench Год назад

A teensyduino is a lot faster and way more capable than your standard Arduino. It not that much more than an arduino either so the teensy really is the better choice. That being said, the teensy is just a microcontroller that runs a program that gets inputs from the pc (visual pinball) and sends out a digital signal to the addressable leds to light up. The teensy has a teensystripcontroller program that sends out the signals to match what the front end or table wants. I recommend watching the series as the earlier videos teach everything you need to know to get this setup. Thanks for the watch!

@nilspta4620 Год назад

@@wayofthewrench thank you so much for the answer. But you you Tell please what teensy Version und octo Version Do you use?

@wayofthewrench Год назад

I used a teensy 3.2 and the octo board ( don't think there is a version for this). Pjrc.com should have them both. The 4.0 teensy is a bit more powerful but should work too.

@nilspta4620 Год назад

Thank you again. I ordered an teensy 4.0, because a 3.2 version is hard to find in Germany. I hope it works.. Sorry, but i have one more question: I dont understand the Part with the Terminal Block.. Did i need everything Else for that? Maybe a powersupply from 230v to 5v to connect it with the Terminal Block?.. Sorry for my Bad englisch

@wayofthewrench Год назад

The terminal block is just a way to have all of the 5v or 12v or common grounds together. If you're running your led strip power, you can just run the wires straight from the power supply. Just watch the earlier videos, it's meant to be watched in a series. Cheers!

@dfa2706 Год назад

loving your videos and am trying to make some changes on sketchup but want to compare to your cabinet, Do you have the actual xml for sketchup i cant get the file to covert back from your pdf and keep getting an error.

@wayofthewrench Год назад

Didn't even know you could convert pdf to sketch up. Sorry but I don't share those files as I have had other RU-vidrs trying to copy my work and say it's theirs. Feel free to use my dimensions from the pdf to make your in Sketchup or in real life. Cheers!

@JamesChow1970 Год назад

took me while to figure out that vpx 10.7.4 64bit version does not load the DirectOutput so my solenoid would not work. I had to run the vpx 10.7.4 32bit version for it to have everything work.

@wayofthewrench Год назад

Glad you got it figured out! I haven't done the 64 but upgrade yet but I'm sure there needs to have a file/folder related to DOF transferred to the 64 but folder and it should work. I'll post either a video or instructions in the video description when I do. Cheers!

@danielbart2889 Год назад

Great content again!

@wayofthewrench Год назад

Glad you enjoyed it, cheers!

@chrispotts8623 23 дня назад

Does the led matrix obscure the table with reflections?

@wayofthewrench 23 дня назад

No not at all. I was worried too but even with the glass, it is great. Thanks for the watch and welcome to the channel!

@lafabricademarcianitos Год назад

thx for your guides videos!!

@wayofthewrench Год назад

No worries, glad you enjoyed them! If ya deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the support!

@nerdrocklives Год назад

Add mine to the list of common fixes - plug your LED strip into the correct port on your Teensy! D’oh

@wayofthewrench Год назад

Oh yeah? It doesn't take much to make DOF not work.....just one little thing! Thanks for the watch, cheers!

@dandgerousdave4308 2 месяца назад

i followed your video but for some reason i dont see the diret output plugin on my b2s did you do something else thats not in the video before you installed dof

@wayofthewrench 2 месяца назад

I may have but I tried to keep the parts separate during filming. I would go back to the first testing LEDs and then watch from then on. Hope that helps.

@Ariola5599 Месяц назад

Hello, I did exactly what you said in the video but my Teensy controller is running the standard Basictest and does'nt care what table I play. What have I done wrong ?

@wayofthewrench Месяц назад

That means the hex file for teensy strip controller didn't flash properly. Keep trying until it sticks. Thanks for the watch!

@Ariola5599 Месяц назад

@@wayofthewrench Thank you for your reply. I will replay video #29 again and look for it.😊

@Ariola5599 Месяц назад

OK I got through the previous video again and now I´ve got my 5 flahers working. They are controlled by the KL25Z board (Piggy back version). I have no matrix installed because I found that a little too distracting. Unfortunately the LEDs of my playfield, speakers and undercabinet still don't do anything. I've been thinking and maybe it has something to do with the fact that I've got the 64-bit of the Baller Installer installed instead of the 32 bit of your video ?

@kenkociolek3501 Год назад

Great video. I'm following along but get stuck trying to access DOF config tool. I can log into VPUniverse, however cannot log into DOF config tool. Anybody having this problem?

@wayofthewrench Год назад

Yeah I have that problem too, sometimes it takes forever to get in. As far as I know this is normal. Keep trying and let it load....might take like 3-5 minutes.

@ccizot Год назад

thanks for the tutorial...really helped me a lot....can you just show how to use the DOF Config ini pull program?... +1 sub :)

@wayofthewrench Год назад

You're welcome. DOF config ini tool? Are you talking about the vpuniverse config tool? If so that is in my previous video(s). Just check the vpin playlist. Thanks for the sub and welcome to the channel!

@dandgerousdave4308 2 месяца назад

did full reinstall all toys and lights test ok all works when running front end but soon as as i load table and play no light or toys im at a loss any idea all files are in correct place from what i can tell the only thing i c diffrent is 2 plugin folders in table one is 64 which im not using just the plugins i have tried both but same problem is the something i have to enable somewhere cheers

@wayofthewrench 2 месяца назад

Did you create a vpuconfig account and save those files in the correct folder? These will tell DOF what each table is doing in DOF. These things can be tricky. I recommend following along through the video once again to see where something was missed. Hope that helps. Also if you have 64 installed, you should check out my upgrade 64 video as I lost my DOF when I did that. Cheers!

@ericparet7055 11 месяцев назад

Salut et merci pour cette vidéo au top ,je rencontre un probleme avec le "Plugins" sous VPX mes leds reste éteinte quand je joue à une table ,par contre dansPiup tout fonctionne parfaitement

@wayofthewrench 11 месяцев назад

It's really hard to troubleshoot individual issues but what I recommend is that there are like 5 or 6 videos in order that relate to this and you should rewatch them to check what got missed. Led set up, cabinet file, DOF set up, etc. Good luck!

@macdox69 3 месяца назад

Do the config files downloaded from DOF Config Tool need to be copied to the DirectOutput folder and the DirectOutput64 folder or does the 64bit plugin read the configs from the 32bit folder?

@wayofthewrench 3 месяца назад

Yes they do, I have a great video on upgrading to 64... You should check it out. Thanks for the watch!

@macdox69 3 месяца назад

@@wayofthewrench I figured as much and have watched all your videos, but must have missed the part about needing in both folders. Seems like lots of guides don't mention it. Thanks for the confirmation.

@wayofthewrench 3 месяца назад

No worries. Cheers!

@alexcasarini7375 Год назад

Hi, I'm Alex, I would like the pup pack vpx Terminator 2 , Have you this ?Thank you

@wayofthewrench Год назад

No, I don't even have the table yet. Look at VPUniverse, they should have it. Thanks for the watch!

@thechampagneroom1 6 месяцев назад

My DOF was working fine for a year and then suddenly my left flipper solenoid stopped working after a few minutes of gameplay. Would restart VPX and the flipper solenoid would work, then fail again after a few minutes. I tried reinstalling DOF and have been stuck at the part where the plugins screen is grayed out. Now nothing works. It's like I am making things worse the more I troubleshoot.

@wayofthewrench 6 месяцев назад

Sounds like a loose connection or ssf amp starting to go. The DOF set up was good but you may have messed it up now if you were changing things. You might have to troubleshoot if the amps and exciters work with another input like a cell phone playing music. Once you know the parts are good, then a fresh Dof install would be in order . Good luck! Thanks for the watch!

@thechampagneroom1 6 месяцев назад

@@wayofthewrench You were right! I have the Cleveland software pinone board with 4 solenoids and last month I thought I fixed a loose connection on the solenoid negative wire. Turns out there was another loose part of the board that connects the solenoids to the main board (they are detachable) that I just found. I was going nuts going through DOF. I kept getting the sound like I was unplugging a usb cord on my computer and I would lose all dof I/ O. I also was putting the wrong version of DOF in the wrong Direct Output folder, putting the 64bit version in the 32 bit folder and thats why it wasn't showing up in the plugins when playing a table. Lesson learned and thanks for the content!

@wayofthewrench 5 месяцев назад

You're very welcome, glad I could help you sort this out. If ya wanna help me out, I'd really appreciate a share out on your social media. Cheers!

@gutog5801 Год назад

Please help All my lights work on vpx and future pinball but not on my pinup popper, player, i had it working before and still work when i play table through pinup but i don’t have led when i am navigating on tables Please help

@wayofthewrench Год назад

I would watch the video again and find the spot about adding lines to pinup popper. It's either there or perhaps if you upgraded to 64 but, it needs the DOF files in the 64 but folder too. Cheers!

@johnr8898 10 месяцев назад

Hey WOTW, me again. I'm not seeing the direct output option on the list in plug-in settings,. I tested my teensy on another machine, so does it need those files too before it shows up within the b2s software?

@wayofthewrench 10 месяцев назад

The procedure I went through in this video is how it should be done and in order so if you're not seeing the plugin, you might have missed a step. Keep in mind this was x86 and not the x64 setup yet so if your putting on x64 bit than those files will need something copied over to. Hope that helps.

@johnr8898 10 месяцев назад

@@wayofthewrench ah yes. It might be a 64 but situation.

@gerrymarshall5479 9 месяцев назад

have you figured out how to get it going with 64?@@johnr8898

@wayofthewrench 9 месяцев назад

I haven't done the upgrade yet but Game Central or Rudy both have a video on doing the 64 but upgrade.

@dandgerousdave4308 2 месяца назад

anyone know on the b2s screen plugins is the only 1 plugin that is pinuplayer display driver or should there also be a directout put plugin

@wayofthewrench 2 месяца назад

Whatever is shown in the video is correct. I can't remember exactly as I haven't looked at that screen in a long time. Good luck!

@coreysmith6410 Год назад

Hello, where can I buy a teensy board already put together. I have matrix and addressable led

@wayofthewrench Год назад

Pjrc.com should have them, not sure about pre soldered ones.

@nilspta4620 Год назад

I feel so bad to asking you again😭🫣 But there is only one thing left that is Not working.. My led rings for the speakers. And i cant figure it out. In arduino (standalone) everything works fine. But in Popper no lights on the speaker. Anything iam doing wrong. But i have no more ideas. Maybe you can help me up again?thx

@wayofthewrench Год назад

I would suggest you watch my videos again, it's really easy to miss one thing and it doesn't work. Did you add speakers to the configtool? Is the port right? You have power and the correct signal wire to the led rings? In configtool, what are you using for your led rings ( playfield mx?) Is the signal wire from your teensy shared with other led strips or on its own? Did you test these with basic led test? What's your lines say in your cabinet file say for the rings? Good luck!

@nilspta4620 Год назад

@@wayofthewrench Yes, speakers are added to the config tool. The port is also correct. In the Config tool I use speaker mx for the LED rings. What do you mean with playfield mx? There is no Playfield mx in the config tool.. Did the LED rings also need extra 5v Power like the led strips or the matrix? Because the led rings works fine in basic led test Mode without extra 5v power. The Signal from my teensy is sharing with 2 led stripes and a matrix. And what Do you meen with "What's your lines say in your cabinet file say for the rings?" so much questions, sorry..

@wayofthewrench Год назад

Sorry not playfield but back mx. Maybe try changing it to what ever works for your matrix and see. I think you need to copy/paste your cabinet.xml file's lines of code for the leds so I can go through it.

@nilspta4620 Год назад

@@wayofthewrench sorry that iam so stupid but what do you mean with "I think you need to copy/paste your cabinet.xml file's lines of code for the leds so I can go through it"? Does that mean i have to copy and paste all my lines from my cabinet.xml to here? And did i need an extra 5v power supply for the led rings (like the same how my pf led stripes and my matrix)? Because i only plugged the led Rings in my last led pf led stripe. Iam wondering because with this configuration my led rings also work in the basic led test Mode but not in cabinet..

@wayofthewrench Год назад

No worries....you actually told me some pretty significant info. If your speaker rings worked in basic ked test, then the signal and power is ok, just 2 things it could be. Either you have something wrong in the vpuniverse configtool ( wrong port, wrong led count, wrong led amount) or your cabinet.xml file is wrong for the speaker ring section. If you send me your cabinet.xml file, I can take a look.

@BLAHBLAHDAVE Год назад

I feel like I followed your video but all I get is a red green blue flash at the beginning of each table then nothing.

@wayofthewrench Год назад

Did you watch the earlier 3 videos? I show how to test leds and generate you caninet.xml file which is all needed to test before DOF. It only takes one little missed step and things won't work. You using a teensy and octo board? Thanks for the watch!

@BLAHBLAHDAVE Год назад

I’ve been following since you started. Thank you by the way. Your videos are wonderful!!!! I couldn’t get my hands on a teensy so I got a wemos. Most of the steps look to be similar except for which board I have. I made a cabinet file last week with your video and tested all my strips etc. the week prior. I’ll have to go through again. Just thought that symptom might sound familiar

@BLAHBLAHDAVE Год назад

I went through your video again and figured it out. Saved my dof config file to the wrong folder. Thank you again for all your hard work!

@wayofthewrench Год назад

Awesome! Glad I was able to help ya out. If you send me a dm in instagram, I'd love to see your dof leds!

@linoj Год назад

Where did you learn about the need to solder pins 15-16 together? I've been searching for a source reference about this. Is it always needed (and why) or it it only sometimes (when)? thx ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zMZ1PhkxwbM.html

@wayofthewrench Год назад

I can't tell you if it's mandatory but at first I didn't do it and I had every single led turn full white.....no color/switching. Then I did it and everything was perfect. I can't remember where I read this but it might have been from the vpin builder's Facebook group post or Major Frenchy videos. Thanks for the watch!