Volvo Penta SX Gear Lube Change with Contamination

Подписаться 81

Просмотров 6 тыс.

50% 1

How to change the gear lube in a Volvo Penta SX outdrive with water contamination. Includes a link to download the Volvo Penta Lube Change procedure including Duo Prop, DP-S.
Correct OEM gear oil to use for Volvo Penta SX, DP-S, XDP, DPX
3 pack (Needed for SX Drives)
amzn.to/3q6dDE8
By the quart
amzn.to/3Og9TrD
PDF from Volvo concerning changing the Lube Oil in the outdrive:
bit.ly/41XKd97
I get a commission every time you purchase a product through my affiliate link above.

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 4

@chrisg1076 Год назад

Be sure to check my channel on how to pressure and vacuum test your Outdrive as well as changing the prop shaft seal. Also, a bit about the raw water pump. Share your experiences below. Thanks for watching.

@activeej8858 4 месяца назад

Hi! Is this the method I would use to flush out the gear case for metal particles? My lower end I believe has a broke Gear so I will be swapping it out with a new lower unit. Although when I check the inspection port for the top portion it still has metal flakes on the gears but the gears themselves look good! I just don’t want to put a new lower unit on and then Run into a new issue because of the metal in the gear case.

@chrisg1076 3 месяца назад

THAT is a good question. I don't believe flushing like I did for contamination would be adequate. I suspect there are metal particles in the bearings, etc. I'd consult with an expert on that one. And research yourself. Installing a new lower unit ($$$$) I'd want to be sure the top end was good to go. Regardless, good luck. Thanks!

@chrisg1076 3 месяца назад

In further investigation, please check out this link. www.offshoreonly.com/forums/general-q/77743-metal-outdrive-oil.html