Volvo V70 MK2 Complete Headlight Replacement - How To Remove Lights and Front Bumper 00-07 V70 YES

Подписаться 24 тыс.

Просмотров 166 тыс.

50% 1

Today I replaced the headlights on V70 YES as after 296k and several attempts to polish them back up they are visibly too dull to pass the MOT and to be honest I'm glad because they were getting useless on unlit roads at night.
The lights are TYC which is a Taiwanese aftermarket replacement costing £110 each. My first choice is OEM but with 4 cars to run on a budget I couldn't justify spending £500 for a genuine pair on what is unfortunately now my least used car.
If you'd like to support my channel please visit my websites and follow my socials:
www.tolly.co.uk
www.cleverprodu...
/ tollyswift
/ tolly_swift
Thanks!

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 129

@warrenlewis7726 2 года назад

You stay very calm.... By 5 minutes, I've snapped every plastic component I came across 🤪 great vid tho 👍🏼

@IAMASPANNER 2 года назад

Well, fortunately, if I have a moment or I trap my finger in something I can leave those bits of video out 😂

@juhansuits6555 Год назад

Thanks for the vid! Kinda surprised you kept the old bulbs. I would sure have installed brand new ones while I'm at it, as these buggers are a massive bear to change if they let go.

@IAMASPANNER Год назад

You’re welcome Juhan, thanks for taking the time to comment! I don’t mind changing the bulbs on this car, I guess I’ve had a lot of practice over the years. They still haven’t gone since I changed the headlights over so they must’ve been in good condition at the time of the video.

@herkko61 2 года назад

Really nice tutorial, thank you! So, the dipped beam (low beam) bulb is H7 and the main beam (high beam) bulb is H9.

@casperhetspookje513 4 года назад

Thanks, great video. I have the 2007 XC70 and it has the same hopeless design. When I replace a defective DIM light bulb without removing the whole unit, I use a piece of PVC pipe to place the lamp with a mirror. You have to have a lot of patience, but I do it again and again.

@IAMASPANNER 4 года назад

I find the dipped beams difficult to line up and have quite often put them in wrong but have changed them so much can do it by feel.

@mikaeljonsson4686 2 года назад

Thx for a really informative and straight forward video! Came in handy as the ballast for my left xenon headlight crapped out because of moisture inside....

@IAMASPANNER 2 года назад

Glad to help Mikael, you’re welcome!

@Themadscientist1969 4 года назад

Noticed how very similar the V70 is to my XC70 model!!! thank you!

@jrgordon47 3 года назад

Funny you should say that...Volvo made 460,000 vehicles in 2004...I have one...But I can tell you that there are a total of 459,999 more that are totally different. They must make their cars like a Chinese menu......🖖

@graemebrown1191 3 года назад

Me to. I'm looking to upgrade my 05 xc70 lights to these

@jrgordon47 3 года назад

One thing I did do was drill a hole in the side skirt covering the hidden 10mm bolt, upon reinstall I covered the hole with foil duct tape. I have big hands and have a tough time replacing my turn signal lamps...so now I'll just remove the Headlight......🖖

@IAMASPANNER 3 года назад

That’s a great idea, it is quite tight, I’ve often had the dipped beam bulbs go in wonky because access is difficult.

@Firebobby927 13 дней назад

Brilliant video and well put together. I have a 2006 one needs the same for test. Fantastic!

@julias-shed 7 месяцев назад

Thanks for this just changed a dipped beam

@simonrrider 3 месяца назад

You didn't need to do all that. I had exactly the same problem and made the lights like new with a simple sanding/polishing kit!

@raiderman28 3 года назад

great job. It sucks when aftermarket stuff doesn't fit exactly like the originals. Usually have same issues with fenders

@IAMASPANNER 3 года назад

Yes it's annoyed me quite a lot, yes they were half the price but don't expect to see noticeable gaps like it has now!

@moulder6040 Год назад

Excellent quality. Necessary to remove all that just to replace sidelight bulb? 2007 V70. Thanks. 😊

@cazzie59 3 года назад

Thanks for the demo, .... what a palaver just to change the headlights.

@IAMASPANNER 3 года назад

Tell me about it, look up how easy it is on the XC90, C30, S40 and V50!

@Saundersstrong 4 года назад

thanks for the video , im changing out my siren module and heard there was a better way to do it , taking out the head lamp seems to be a simple approach. looks like you have a big lump on your hand did you hurt it ??

@IAMASPANNER 4 года назад

Hi Ben, thank you I’m glad to help. I’ve actually just posted a video about my hand the other day, it’s a ganglion cyst where the fluid has escaped from the joint.

@MRTHC67 2 года назад

Hi Tolly Swift. As usual clear practical in explanation and extremely useful advice. One question: I had a small accident breaking the bumper and the water tank. Is it the only way, to remove the bumper, to be able to replace the water tank? Thanks for your help. Alexander

@IAMASPANNER 2 года назад

Hi Alexander, yes you need to remove the bumper to replace the water tank if by the water tank you mean the windscreen washer reservoir.

@MRTHC67 2 года назад

@@IAMASPANNER thank you.Tolly. Yes i mean the windsreen washer reservoir.

@MRTHC67 2 года назад

I've done the job. In reality wasn't broke the windsreen washer reservoir but there was a loose tube. I didn't have to replace the water tank si was more Easy. Thamk you Tolly. I would have liked to have been able to help you with some small funding but at the moment I am unemployed. I'm waiting for better times.. Ciao

@IAMASPANNER 2 года назад

@@MRTHC67 that’s very kind but not necessary, I’m more than happy to see people save money and help themselves. Glad you got sorted!

@davidpedder9048 3 года назад

So happy I have the newer 2011 S80. Lights are held in place be two sliding pins. Much easier !!!!!

@IAMASPANNER 3 года назад

Same on the XC90 and C30 at least, probably the later V70 too if the S80 has them. Fortunately you don’t have to remove the assemblies to change the bulbs on the P2, awkward though!

@timven8402 4 года назад

Thanks mate! Nice video! What I was wondering was that u used the old bulbs....and u didnt put led bulbs to side light and parking light....those bulbs specially dont last long time...🤔

@IAMASPANNER 4 года назад

Hi Tim, I’ve actually only had 1 side marker blow in 5 years and the sidelights are easy to get to anyway but you’re right it would’ve been best to change the bulbs out for new while you’re at it. I’ve grown tired of LED bulbs, they cause more issues than they’re worth and it’s really hard to get quality ones even branded. Thanks for the comment!

@timven8402 4 года назад

@@IAMASPANNER I see, how do u get easily to side lights? What about parking lamps? As Volvo is a very reasonable manufacturer I cant understand why they made the bulb change such a mess....I changed xenon bulbs without taking the bumper off and it took hours. Of course I was checking this and that while doing it but had to use mirtor and rip off air filter and boxes etc...terrible job anyway....in one video somebody does that with one hand holding camera in other hand. I couldnt do like that😁

@Colin623 2 года назад

Thanks for the excellent video and headlight change, lovely clear images, you must be using a decent camera ? I have the same car and need to replace the H7 bulbs and sidelights, and I'm sure you know just how difficult that is without dropping the bumper ! so will be doing it soon, my headlight lens are a bit cloudy too, but I won't be spending that amount of money to clear them, have watched a few videos on YT how to do it, though a bit tedious looking.

@IAMASPANNER 2 года назад

Thanks Colin, I think I was using an iPhone 11 at the time which recorded in 1080p. My current videos are 4K. If I recall correctly one side of the car is easier than the other to change bulbs, you can change the bulbs without removing the assemblies but it is fiddly and I’ve often not got the headlight bulbs fitted straight. I did polish the lenses 3 times before replacing them but I never lacquered them which may be why they didn’t last. They were close to failing the MOT so I just replaced them this time as I don’t have the patience many others are blessed with.

@Colin623 2 года назад

@@IAMASPANNER Hi Tolly, yes changing bulbs is a nightmare, the passenger side (UK) model isn't too bad as it's simply a job of removing the airbox which allows easy access, but the offside is a nightmare, because of an electronic box of some sort which just makes it almost impossible to get access to the bulb with any control over what you can do ! But the side light needs changing too, and they are even more tricky to get out ! So overall it will save a lot of stress by dropping the bumper ! So thanks once again, done it before, but needed a refresher to remind me how to do it 😊

@peterscotney1 4 года назад

Brilliant vid tolly! Most informative indeed ! ....cheers mate

@IAMASPANNER 4 года назад

Thanks Peter, much appreciated!

@bonesofsteel7162 3 года назад

@@IAMASPANNER Which year model ? 🙂

@IAMASPANNER 3 года назад

@@bonesofsteel7162 Mine is a 2004 caught in the middle of a facelift so it doesn't have the chrome trim you see in 2005. Although my car was originally sold in Germany in October 2004 before it was registered in the U.K. a few months later.

@2ManyJALS 3 года назад

Anyway you could increase sound? Very helpful video but difficult to hear even with volume up on device and youtube. Thanks.

@IAMASPANNER 3 года назад

I can’t do anything now, it’s my mistake when editing I didn’t know how to balance the sound out before. Glad it helped otherwise though!

@jspaulding4106 Год назад

If anyone else has this issue, try turning the closed captioning on. Doesn't make it louder 😉, but you can see most of the words...

@croooaaalagraula 4 месяца назад

Thx for sharing the how-to remove bumper and replace headlights... my old 2006 V70 get the same bad look and this is causing a problem at night where the lighting is not that good enough. What is your experience with these aftermarket ones after some time ? We see you struggle with some unexpected space between the new fitting and the bumper, is it due to their different shape ?

@IAMASPANNER 4 месяца назад

You’re very welcome! These lights I have I don’t think they’re very bright but I may be used to BMW HID lights being so much better. I think if I changed them again on the V70 I’d go for aftermarket projectors instead of standard ones. I think the fitment was terrible because they’re a cheap copy.

@nikosuoa 4 года назад

Thanks for the video! How much risk you think there is for some of the plastic bits breaking?

@IAMASPANNER 4 года назад

The only bits I had break were removing the side marker by twisting the wrong way, damaging the tab you use to remove, and the sort of guide tunnels that lead to the manual adjustment. So neither of these things are much of an issue. The plastic was very brittle even though temperatures pretty high so I'm putting it down to age of the car (approximately 16 years old).

@denisvic6768 6 месяцев назад

How to remove the side marker? I just have to change this lamp, but do i have to turn? Or just to pull?

@berntnilsson8906 3 года назад

Where can one by the plastic tool for the clips? Great video btw!!

@IAMASPANNER 3 года назад

Hi Bernt, www.cleverproducts.co.uk and thank you for the feedback!

@zulualpha4603 4 года назад

Hi just wondering i am on the market for a station wagon and I am caught between getting a Passat b6 2L diesel auto up to 2010 or getting a Volvo v70 2.5 diesel D5 automatic up to 2007, what do u think, thanks

@IAMASPANNER 4 года назад

I’ve had a 2007 2.0TDI 170bhp Passat B6 saloon and loved it at the time but I didn’t know about the oil pump recall and my engine seized. Personally it would be the V70 for me but that’s more because of my experience with mine now having 298k on the clock and I’ve not had any issues that weren’t my fault in 66k miles. The Passat has an electric parking brake whereas the V70 has a hand brake which is pretty useless if you live somewhere hilly (like any drum in disc parking brake). If there’s anything specific between the 2 you’d like my opinion on just ask.

@zulualpha4603 4 года назад

Tolly Swift thanks for that, just found out that some v70 come as a 7 seater as well

@IAMASPANNER 4 года назад

Yes, not so sure how I’d feel about using the backwards seats but I guess the odd time wouldn’t be so bad. You can also get 7 seats in the E class estate of that era.

@peterscotney1 4 года назад

Go for the v70 mate

@fidoforme8561 3 года назад

Excellent ! Many thanks

@IAMASPANNER 3 года назад

You’re welcome, thank you!

@fabianhenrich4697 2 года назад

Did you tried to not only polish the headlight but also to sand it down with wet sandpaper and clear coat it after that to seal it?

@IAMASPANNER 2 года назад

In all honesty I was taking the easy option replacing them. I had polished them before but not clear lacquered. The car deserves the love but I wish I’d bought genuine ones, I don’t think they illuminate the road properly these ones.

@chongomcsenditdluxe8960 3 года назад

Thanks for this video, don’t know why Volvo made this so complicated I should have stuck with BMWs

@IAMASPANNER 3 года назад

You’re welcome, glad to help. They’re not all this bad and some jobs are much easier on Volvos and some are easier on BMWs. The later Volvos and the XC90 it’s just 2 pins to remove the headlight assemblies.

@chongomcsenditdluxe8960 3 года назад

@@IAMASPANNER used to work on Volvo trucks they’re so easy the headlights just fold out 😂😂

@chongomcsenditdluxe8960 3 года назад

All this cos I accidentally pulled the headlight retaining clip out on our xc70 😂😂

@IAMASPANNER 3 года назад

Oh no, is it just too awkward to do it with the light in situ?

@chongomcsenditdluxe8960 3 года назад

@@IAMASPANNER cos it’s the passenger side and the xc70 has the ecu on top of the airbox there’s not enough access, putting it back together now all sorted, just seems needlessly complicated for a headlight, makes up for it in safety I suppose 😀😀

@jorgeomarfarias4850 2 года назад

Excelente video muy explicativo, pero en inglés, en mí caso y creo que de muchos no comprendemos ese idioma, sería fantástico que los subtitules en español, puede ser factible? Desde ya muchísimas gracias, un saludo cordial desde Argentina.

@mikebroughton8644 2 года назад

Do you have a video about how to change out a wiring harness for the low-beam? I was looking through your extensive library but didn't see anything. I have a passenger side low beam that won't work. Bulb replaced, no luck.

@IAMASPANNER 2 года назад

Hi Mike, I don’t have a video for it but I can tell you it’ll most likely be the headlight switch inside the car. My car did this a few years back and one on my dipped beams is wired into my sidelights.

@DutchCarspotter 8 месяцев назад

Excellent video!!!

@gheorghinacov6008 2 года назад

Valeo headlights are exactly as the OEM ones. TYC a little cheaper but as well less quality.

@IAMASPANNER 2 года назад

I couldn’t justify double the price unfortunately. I never know when the V70 might decide it doesn’t want to go on any longer. Currently at 314k.

@gheorghinacov6008 2 года назад

@@IAMASPANNER By the way I still can’t wait for the coolant change video on Euro 4 D5😁

@IAMASPANNER 2 года назад

@@gheorghinacov6008 😂 I’ll see what I can do, the coolant is pretty good on my car but if I run out of jobs I’ll get a video done for you.

@АндрейТретяк-ш9щ Год назад

Я имел ввиду таким заниматься.😅😅😅 очень много манипуляций для замены... Когда мне будет нечего делать, тогда буду ковыряться так.😅😅😅

@seantudi 4 года назад

S60 2006, same headlights??? Where do you buy???

@IAMASPANNER 4 года назад

Yes they’re the same. I bought mine from Prasco and they were about half the price of genuine ones but they don’t fit that great, there’s a gap underneath them.

@donmoore7785 4 года назад

Excellent informative video! I have to do the same job.

@IAMASPANNER 4 года назад

Thank you and good luck!

@imanenglishman 2 года назад

Conveniently you didn't show replacing the bumper trims. Is that because it was an absolutely nightmare?

@IAMASPANNER 2 года назад

I’ve had them off plenty of times with no issue refitting, are they damaged?

@salomonyosifbulhosenlozano1750 3 года назад

Exelent video

@Ilmars_Dzigurs 3 года назад

How does new TYC headlamps looks after all these months, like brand new or already wisible some damage to reflector ore lense?

@IAMASPANNER 3 года назад

I’ve only done around 3500 miles so far and they still look fine, no issues, I do believe they’re a slightly different shape to genuine ones though but genuine were double the price.

@drew4561 3 года назад

Were your replacements glass or plastic? I got a rock through mine and really hate to go to all the trouble to replace with glass only to run the risk of it happening again.

@IAMASPANNER 3 года назад

If yours is glass then it must be an earlier model, the facelift has plastic headlights. The glass ones don’t deteriorate like the plastic ones do but they outlawed them for safety. You could buy some used ones that are glass and fit them, I’d be surprised if there are any new for sale.

@burghysingson2056 2 года назад

Hi Colin! Is this headlamp will fit in my 2002 V70? Thanks!

@IAMASPANNER 2 года назад

Yes, it’s just the earlier headlamps have glass lenses and not plastic. 👍

@roemerschultz3537 3 года назад

Thnx brilliant!

@andywarrington4738 2 года назад

early models had glass lenses which dont fade like the cheap plastic ones , damn Ford

@IAMASPANNER 2 года назад

They were much better, and the grille used to be made of solid metal too, not just Ford that move to plastic though, everyone moved to plastic. At least the Volvo build quality and reliability was still good at this point.

@L3nny666 6 месяцев назад

how did they become so foggy in the first place? arfen't they made out of glass?

@IAMASPANNER 6 месяцев назад

The facelift version are plastic unfortunately!

@danielebbeling4056 Год назад

Can older model glass assemblies fit to replace these ?

@mariusdudenas2628 Год назад

2000-2004 requires modification of the connector. Motor for height adjusting does not fit for models 00-04 with this Headlamp, but yes you can 😄

@graemebrown1191 3 года назад

The gap at the bottom.. Is that to fit the xc70 bumper

@IAMASPANNER 3 года назад

The gap under the lights? I think it’s just a bad shape aftermarket part, the old ones didn’t have the gap.

@ianhuizinga5487 2 года назад

Are the push in tabs re-useble?

@IAMASPANNER 2 года назад

You’ll have to be more specific, without watching the full video I don’t recall what you mean?

@GD0TEP Год назад

Where did you get the lights from???

@IAMASPANNER Год назад

Prasco, can't remember the brand, maybe TYW, they're already clouding up inside so they have water ingress somewhere.

@stevehoulihan726 3 года назад

Any tips on changing the side marker light bulb? I've just bought a 2007MY XC70 and neither of them work.

@IAMASPANNER 3 года назад

Hi Steve, looking at mine I think you need to remove the headlight assemblies completely unless you can get in from the wheel arch although even that is blocked by the alarm module on the drivers side.

@stevehoulihan726 3 года назад

@@IAMASPANNER Jesus! On some forums some posters have said they've heard you actually pull the wire, which they say, and I agree, sounds bizarre! Can't believe I have to take the bumper off and headlight out to change a bulb. That's madness.

@IAMASPANNER 3 года назад

@@stevehoulihan726 I agree it's bonkers when most of the jobs on this car are relatively straight forward when compared to other cars. I wish I could suggest another way but if you can get to the cables that might be your best option.

@stevehoulihan726 3 года назад

@@IAMASPANNER Thanks mate. Obviously don't want to pull the cables out of the bulb holders though!

@IAMASPANNER 3 года назад

@@stevehoulihan726 no but if it saves you dismantling the car you won’t be in any worse position because the lights don’t work anyway. I hope you get sorted anyway! 🤞

@Charlitos1988 2 года назад

7:05 7:19 having hard time disconnecting

@IAMASPANNER 2 года назад

I imagine you’ll have sorted it by now, did you remove the bulbs complete with the holder?

@hahbldmat8988 9 месяцев назад

How remove n replace new fuel pump

@IAMASPANNER 9 месяцев назад

I have done this recently but still haven’t edited the video unfortunately.

@farmdve Год назад

You could have just sanded it down and polished. While the video is informative, the replacement was not needed.

@IAMASPANNER Год назад

I still have a pair of original headlights I’d like to restore just didn’t have the patience back then, think it would’ve been an MOT failure. The aftermarket ones in the video are already fogging up inside 🤦🏻‍♂️

@farmdve Год назад

@@IAMASPANNER Well that is unfortunate.

@JisMeister 5 месяцев назад

@@IAMASPANNER That's such a shame. For $250 per headlight you can get the original one from Valeo. I got it for a whopping $30! I bought a slightly dull set that I will polish on the outside and clean on the inside. Costs me in total including purchase only 70 dollar for 2!

@jrgordon47 3 года назад

Danger Wil Roberson...Danger...While going through the "Monumental" task of trying to replace a front passenger directional lamp...Something that I'd never expected happened...The Lamp fell into the Headlight assembly...Now I have to go back in there and take the Assembly out to retrieve the lamp...Has anyone ever heard of this happening...EVER......🖖

@IAMASPANNER 3 года назад

I’ve lost a few sidelight bulbs in headlamp assemblies before and have dropped the dipped beam before but managed to get it back, it’s not great is it.

@highinthesky64 8 месяцев назад

👍

@Svisse90Gaming 3 года назад

Good guide, but really dumb way to transfer part between the old lamp to the new by PUSCHING your new lamp to the floor! To much of a risk getting scratches all over the surface!! Otherwise, good guide

@IAMASPANNER 3 года назад

Thanks Jonas, that's what the carpet is for, I always put one down for jobs like this or bumper removals on newer cars.