VW 2.0 TDI engine and DSG dq250 gearbox thermostats replacement.

Подписаться 23 тыс.

Просмотров 10 тыс.

50% 1

‪@uldisbetons8776‬ ‪@gvidolieknis8111‬ This video offers a little insight into the process of replacing both thermostats. #vw #volkswagen #dieselpower #dasauto #tdi #dsg #dq250 #thermostats #engine #dsggearbox #carrepair #carmechanic #maintenance #car #autoservices #carservice #hardwork #passat #passatb7 #skoda #superb #golf6 #torque

Авто/Мото

Опубликовано:

22 дек 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@LVeMZet 2 месяца назад

Labs

@gvidolieknis8111 2 месяца назад

Jauks darbiņš.😊

@uldisbetons8776 2 месяца назад

Prieks censties.

@antonibaldoviborras9814 2 месяца назад

How long it takes to complete the entire operation?

@uldisbetons8776 2 месяца назад

The whole process took about 3 hours.

@johny89xtr 2 месяца назад

Could you please provide the exact name of the key you used to unscrew the thermostat?

@uldisbetons8776 2 месяца назад

According to service manual alternetor in this procedure must be removed. Then almoust any tool is good. I used Vokswagen tool 3185.

@laszloarvay8410 4 месяца назад

What Tool can I easy to remove 2 Thermostat Screws? What are you using? 😀

@uldisbetons8776 4 месяца назад

According to service manual alternetor in this procedure must be removed. Then almoust any tool is good. 🤣 I use Vokswagen tool 3185. There was also a delicate twelve-beam tool with a rounded tip. I don't remember the number.

@MM2009 5 месяцев назад

I was not able to remove the thermostat on CBA engine without undoing the plastic pipe behind the oil filter, and still managed to damage double oring

@uldisbetons8776 5 месяцев назад

On this engine , by service manual, plastic pipe must removed to change termostat. I changed all the thermostats that I have changed as shown in the video. Double oring always put a new one.

@29Nussi 6 месяцев назад

Why remove fans?

@uldisbetons8776 6 месяцев назад

To get more space for work. This is not even close to job description in service manuals. 😂

@sk4lman 4 месяца назад

Is it possible to replace just the thermostat and keep the plastic housing? Or do you need to swap the whole thing?

@uldisbetons8776 4 месяца назад

It is necessary to change the whole body because it is one part. It is not possible to replace only the thermostat separately.

@sk4lman 4 месяца назад

@@uldisbetons8776 Thats a shame. I found a thermostat thats compatible, but what use is it if i cant get the thing out of the housing..? :( Thanks for the info! :)

@uldisbetons8776 4 месяца назад

@@sk4lman Nothing to do. Will have to be replaced with housing. As far as I remember, the housing did not look disassembled.

@flowless1753 3 месяца назад

Is it possible that my MK6 TDI with DSG has no DSG thermostat? On the coolant hose from the dsg transmission there is no thermostat like yours.

@uldisbetons8776 3 месяца назад

It is possible that there is no such thermostat. If there is 1.6 d and dsg is dq200.

@flowless1753 3 месяца назад

@uldisbetons8776 By 1.6d you mean 1.6 engine? I have the 2.0 tdi engine. My engine coolant temp is not reaching normal temperature operation. I would have check the dsg thermostat first since it's easier than the main thermostat

@uldisbetons8776 3 месяца назад

@@flowless1753 If there is a 2.0 tdi and a dsg dq250, then there should be such a thermostat. And according to experience, the thermostat to the gearbox is the first to die. But the main thermostat can also be left open!

@flowless1753 3 месяца назад

@uldisbetons8776 thanks for the info, i find it weird that there is no thermostat on the dsg hose.

@uldisbetons8776 3 месяца назад

@@flowless1753 Have you watched carefully? If everything is assembled there, it is difficult to see him. As far as I can remember, I have never changed one for golf. I have changed Passat, Sharan and maybe also Tiguan.