Тёмный

VW SEAT Skoda Audi Ignition lock barrel + Transponder antenna (Coil) replacement 

ECU Connection UK (By JCcars)
Подписаться 2,5 тыс.
Просмотров 7 тыс.
50% 1

Do you need to replace a faulty transponder antenna (Coil) on a VW group car? if so you will of found out that they are fixed to the lock barrel & cannot be removed - VW only supply a complete lock barrel with the antenna already installed, this unfortunately means that you will also be supplied a new ignition key cut at random that will be different from your car door - not convenient! Don’t worry - We have the solution! Simply use our transponder antenna remove & refit service we can remove your faulty antenna from your lock barrel, then we will remove without damaging your replacement antenna from your donor lock barrel (Either new or secondhand) & then fit your donor antenna to your original lock barrel. Your original lock barrel will then be returned to you in just a few days with your new antenna installed so your original key can be used to start the car.
Here is our full guide on how to remove the ignition lock barrel from the steering lock, an easy DIY job, all you will need is a piece of wire apx 1- 1.5 mm diameter (Large paperclip or wire coathanger is ideal)
ecuconnection.co.uk/product/a...

Авто/Мото

Опубликовано:

 

30 дек 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 42   
@cornett0
@cornett0 2 месяца назад
Very useful thanks for sharing. I found electrical wire wasn't stiff enough., but, luckily my other half sews so I managed to find a large sewing needle that did the job,
@JC-ECUConnection
@JC-ECUConnection 2 месяца назад
Thanks for watching!.. good job, I usually use a large paper clip or an old piece of piano wire!
@sollykhan2385
@sollykhan2385 10 месяцев назад
Thank you for this AWESOME video, please post more super cool tips, Bless 🙂
@JC-ECUConnection
@JC-ECUConnection 10 месяцев назад
Thanks for watching & for your comment!
@johnydepp8334
@johnydepp8334 Год назад
Good job
@JC-ECUConnection
@JC-ECUConnection Год назад
Thanks!
@michaelb.3774
@michaelb.3774 6 месяцев назад
thanks for your answer, but I can't find it
@JC-ECUConnection
@JC-ECUConnection 6 месяцев назад
nwkeys.co.uk/Product/vag-vw-audi-seat-skoda-ignition-antennae-removal-tool
@michaelb.3774
@michaelb.3774 6 месяцев назад
perfect video 👍 BTW where I can get this metal helping part to separate lock and antenna, and combine them again?? you've a direct link to oder? I'm situated in Germany .... best regards Michael 😊
@JC-ECUConnection
@JC-ECUConnection 6 месяцев назад
Thanks for watching & your comment - this tool is available in the U.K. from NW Keys, They are specially made for them so probably not available elsewhere…
@pujo28
@pujo28 8 месяцев назад
Hello. I changed the housing that holds the ignition switch and lock barrel. When I try to re insert lock barrel, I put key in, turned to on position, insert lock barrel but can’t get it to click or lock in place. Key stays in on position. I’m thinking it’s the $30 Amazon part that’s the problem. Maybe I need to buy the housing from a better site? I just can’t get lock barrel with the key in it to fully seat and click in. Goes in almost ol the way but won’t click in. Thoughts?
@JC-ECUConnection
@JC-ECUConnection 8 месяцев назад
Hi, it may well be a lie quality ‘pattern part’.. I would buy a secondhand genuine part & try again!
@revjoe868
@revjoe868 Год назад
Hi, is it possible to remove the antenna safely using a vise? I don't have that tool that fits the ignition barrel and also don't live in the UK to bring it by the shop. My original antenna doesn't read my key anymore. Only when I place a 2nd antenna close to the key in the ignition I can start the car.
@JC-ECUConnection
@JC-ECUConnection Год назад
Hi, no I wouldn’t try to remove it with a vice, if you are in Europe we can do this job for you no problem, our services are IOSS compliant & can do it by post, for more information please view our website: www.ecuconnection.co.uk
@alexsmekofix8694
@alexsmekofix8694 Год назад
Where you buy the tool to take the antenn out? Do you buy a new or you take from secondhand?
@JC-ECUConnection
@JC-ECUConnection Год назад
We had the tool specially made to order, we generally tend to re-use secondhand antennas although new antennas are available from various locksmith supply companies..
@fireblade_ninja308
@fireblade_ninja308 Год назад
So when you replace ignition antenna don’t you have to program it so it connects with the chip in the key?
@JC-ECUConnection
@JC-ECUConnection Год назад
No, the antenna is not a programmed part… it is simply an antenna
@JC-ECUConnection
@JC-ECUConnection Год назад
@@joelsalazarnet the Instrument cluster is programmed with the key data, the transponder in the key is programmed to the cluster - this information is transmitted via the antenna from the key to the cluster…
@ssteward
@ssteward 3 месяца назад
In that case why do you need to take the antenna off the barrel? Is it only in cases where the antenna is damaged?
@9.6mviews48
@9.6mviews48 Год назад
Does the antenna need programming to car at all, or can i just buy a new lock cylinder and its plug and play
@JC-ECUConnection
@JC-ECUConnection Год назад
Antenna is not programmed & yes you can change the lock cylinder with the aerial BUT that means you will have to carry 2 keys, one for the door & one for the ignition… we can swap the aerial for you, no probs: ecuconnection.co.uk/product/audi-seat-skoda-vw-ignition-lock-barrel-transponder-antenna-removal-refitting-service/?currency=GBP
@9.6mviews48
@9.6mviews48 Год назад
@@JC-ECUConnection i am looking to change the door locks on my car anyways as they were taken, so it would make sense for me to just plug in the new lock with antenna
@wasimuddin2062
@wasimuddin2062 8 месяцев назад
I changed the key shell and left the key battery out for like 24 hours and now when i use both original and spare key, the dash says “no key” and the engine will instantly shut off. Any idea on how to fix it?
@JC-ECUConnection
@JC-ECUConnection 8 месяцев назад
Sounds like you didn’t change the transponder in the key when you swapped the case - check this first
@nerkis00
@nerkis00 8 месяцев назад
Hello, i had problem with blocked key and somehow i managed to unblock it (by force) and now its working, but when i take the key out radio, headlights and dashboard are still working, do you have any idea where is the problem. Thank you
@JC-ECUConnection
@JC-ECUConnection 8 месяцев назад
Sorry, without having the vehicle present I’m not able to help..
@ZiooR
@ZiooR 9 месяцев назад
whats wrong if the key just spinns sometimes?
@JC-ECUConnection
@JC-ECUConnection 9 месяцев назад
That is most probably a lock barrel fault..
@ArdisLacaj
@ArdisLacaj 6 дней назад
Hey i need to change just the antenna bcz is damaged does that mean i need to use two keys one for the doors and one for ignition?
@JC-ECUConnection
@JC-ECUConnection 6 дней назад
@@ArdisLacaj The reason for changing the aerial- as in the video is so you don’t have to use different keys..
@ArdisLacaj
@ArdisLacaj 5 дней назад
I have another problem it shows immobilizer active on the dashboard but the ignition works ok can it be bcz the black antenna is a little damaged , thanks if you can help me to remove that message
@JC-ECUConnection
@JC-ECUConnection 5 дней назад
@@ArdisLacaj yes, this could well be due to a damaged antenna
@zahaidrahman2052
@zahaidrahman2052 Год назад
Where can we get the tool from?
@JC-ECUConnection
@JC-ECUConnection Год назад
We had it specially made, we can give you the details of where you can buy one if you can contact us by email via our website: www.ecuconnection.co.uk
@barniep
@barniep 5 месяцев назад
What's use, is the other end off the tool for? Your tool is not similar to the one of the NW key's? 🤔
@JC-ECUConnection
@JC-ECUConnection 5 месяцев назад
There is 2 different sizes of the transceiver / lock barrel - the other end is for the other size & yes this is the same tool you mention..
@barniep
@barniep 5 месяцев назад
Is it possible that you could measure the height of the Grove. ​@@JC-ECUConnection
@JC-ECUConnection
@JC-ECUConnection 5 месяцев назад
@@barniep 7mm one end & 13.5mm the other..
@barniep
@barniep 5 месяцев назад
@@JC-ECUConnection thanks for info 🙂the long one, which car, is that for?
@JC-ECUConnection
@JC-ECUConnection 5 месяцев назад
@@barniep not sure exactly which cars but other VW group vehicles…
Далее
Replacing Mk5 VW Ignition Switch Lock Cylinder
24:13
Просмотров 148 тыс.
СКАМ НА TWITCH
14:07
Просмотров 260 тыс.
2011 Skoda Superb Ignition Key Barrel Replacement
26:51
Skoda / Volkswagen / Audi Ignition Barrel Repair
5:28
Просмотров 142 тыс.
VolksWagon / Audi ignition failure explained.
22:13
Просмотров 2,1 тыс.
Škoda Octavia Ignition Lock Replacement
23:16
Просмотров 10 тыс.
rekeying VW/Audi ignition cylinder
6:47
Просмотров 11 тыс.