VW Used ECU Security Setup, Free No programming. Jetta, Golf and Beetle 

Thanks a lot i am a diesel Mechanic and i have my shop here in Colorado and with this video i can fix a Jetta 2002 thanks

Back by popular demand, Automotive circuit boards! Hope you like. Btw that cut at about the 2 min mark was cutting out a long unneeded explanation of what that chip does. The TLDR of that chip is it interfaces the microcontroller with a few of the outputs of the ecu.

This is a great video, thank you for your advice. Does this modification work on a VW Jetta 2016?

Your explanation is very attractive. I've subscribed for this. Thank you!

Can't you change ecm out of same style car cabrio same year in junk y

Hello! Do i just need change the chip? Checksums sre not needed?

When changing on the ECM on a Jetta GLI do I need a program and play. I noticed some are programmed which are more expensive and others are not.

Interesting video. We're having issues with a 2013 beetle and found out it has a Tricore ECU. Basically, it has a processor with the eeprom built in. It is a 176 pin CPU so swapping it out could be done but not for the faint of heart. A new battery turned out to be bad and never set any lights or codes till the car ran bad. then a bunch of sensors were reading odd. This happened after 2 weeks of driving on the new battery. The problems required a reset and a new battery. The dealer said we needed a new ECU. That's what took us in the ECU direction. Anyways, Folks, check to see what kind of eeprom is in the car to make sure you can move it.

Hello, Great video. What's the size and pitch thread of 4 ecu case bolts? Thank you

What year was this pcm from? Will this method work on 2011 VW golf gti?

Can I use a tuned 1.8t ecu in my 1.9tdi?

Thank you. For your tutorial 💯

AWESOME, Video, Thank you for your kind effort by sharing your knowledge, well appreciated man, Bless 🙂😇

You are a mad genius. I hope you are getting paid very well to do what you do!!! You've just saved me a huge repair bill! I'm going to be doing this to replace the ECU on my Daughter's 2002 VW Beetle. Will let you know if it works! And if I don't burn down my house doing it!

Does it wotk on Škoda Octavia 2017?it's pretty much Golf.

Hey man, thank you for this video. Wondering if you'd know if i swap the chip from a immobilizer defeated ecu into one that isn't will it work? Ive got a 2001 vw jetta vr6 auto with a ecu thats defeated and doing a manual engine harness swap and I'd like to swap the chips instead of spending $100 getting it done again. Thank you if you know !

Hi .. do you know the simos vw ecu bme engine ? Which power supplies are permanent for memory

Have you had any luck dumping the rom and flashing it to a new board opposed to removing it and swapping it around physically?

I'm having an ecm issue. My car won't start only in the mornings. In the afternoon or evening, I have no issues. I have to disconnect my battery in the a.m. for a few minutes and it will start, but my tach, speedo, temp, and fuel gauges don't work. I'm thinking it's something to do with condensation, as I live in humid central FL. I'm getting engine codes UO146 and UO155. Anything I can try that you can think of? I really can't afford to replace it. Thanks! And I really enjoy the videos!

Hi! My r32 mk5 ecu is broken, do i need the same exact model of ecu or the golf mk5 ecu works if i use for replacement. Pls advice. I have misfire on cylinder 6 thanks in advance

Can’t you program immobilizer with vw software or vcds?

Hey mate will this work on edc17c46?

Where in Florida are you I have one from a 2010 vw jetta 2.0 bought one with the same part number, is all you have to do? Replace it for the key to work?

I have a 2011 jetta 2.5 that keeps shutting off while driving. Can you help me out

I have a mk5 golf with and intermittent power fault when starting the car. I think it will be a dry solder join on the board. Have you ever fixed any of these faults, thinking about pulling the back off it and re soldering it. Have you every fixed any faults for the connector pins

Do you do DPF delete and tune ?

Question : can I replace my ECM with a different Part Number My ECM 8U0 907 115K REPLACEMET 8U0 907 115 L

What temperature did you have the hot air station?

I just use carprog to read and write eeprom data without solder/desolder

But u can do immobiliser adaptaion without remove anything from ECU

will this work on tdi pcm

A chunk of the bmw and mercedes ECU's can be done similarly

My non VW dealership mechanic swapped out my bad ECU for a used one. As far as I can tell, everything works, EXCEPT my key fobs. Any suggestions as to why that might be or I can do to fix that?

Sorry for asking this cuestion to many times but wath happened with Jbc .

Hi. I want to ask you if it is normal for the injectors to pulse when the key is in contact (I specify that the engine is not started) I think it could be from the ECU

Great video , it is very informativ . Hope to keep making amazing videous . I wish you good luck

Hey man, you have really good videos, you have to improve youreself not to gesticulate so much with youre hands so fast bechouse it is really nerving and cann not pay attention, youre voice and speaking have to be smoother and not so hectical!!!

I have a ECM with the part number on it of 07k906-055 g and I can't find which chip is the immobilizer chip on this particular model I looked everywhere on the internet and can't find it anywhere any help on that? Anybody? bueller? bueller?