Wagner Control Pro 250M & 350M Comparison, Review and Demo. How to Setup and Spray 

As DIY spray pump they are very good I've got the 250r and have put at least 1000 litres through it in roughly 4 years and it still sprays absolutely fine but I do look after it I clean it properly after every use I cycle the pump with warm soapy water until it runs clear then cold flush put pump armour in it and strip the gun down for what they cost which isn't a lot in comparison to other units what mine has done is quite amazing really considering oh and just a tip for anyone who buys one of these units before every use take the suction tube off and put a few drops of piston lube in and push the red ball release button a few times and let it sit for 10 minutes if you do that the little pump will work it knackers off all day with no issues at all

Excellent and clear instructions how to clean the paint

Thank you. Great video

Welcome back old friend

Thank you !

Thanks for a great video. Which is better? The 250 M or the Graco 16w120. Thanks

I am struggling to change the filter... can you explain... I am trying to unscrew filter housing unscrew so it is in two from the middle it just won't budge.

Hi, I need some advise please, I am a painter but have never used a sprayer before. I purchased the 150 m but found it ran out of paint to quickly and the cleaning was a bit of a drag. I have returned it and looking to get another one. I do mostly residential work ( living rooms, hall stairs and landings) and ideally would like not to thin the emulation down, i would be using it for doing mist coats quite a lot. should I get the 250 m or 350 m or Maybe a different brand maybe Graco.

Would you be able to to spray masonry paint with the 350m ?

Are they both good for a house with round about 750 square meters of walls and cieling?

Do you have to water down your paint at all please x

Hello, I have now tested three different colors. The paint manufacturers recommends a maximum of 10 percent water. I only get a good picture if I dilute more than 20 percent with water. does anyone else have the same problem?

Can you buy a small nozzle,for the 250M to spray Dulux satinwood diamond white water based(high viscosity) ,for woodwork that gives a 4" spray without having to overthin the paint.Any ideas??

The only thing that was said was that jobs never take just one day. So do you need to clean this at the day of each day. Or can the paint stay in the hose over night ready to continue the next day?

What's the difference between the M' and the R' models? I can't seem to find any difference betwween the 250M and the 250 R etc. TYIA

Great video. Ive had the 350 skid for a few years doing small to medium diy jobs. A highly recommended bit of jit I would also recommend cleaning the gun filter out every time.

I have the 350 but is really giving me problems..it never spray airless ..when I spray it the edges are very thick and makes a line…I have tried everything..is there way way u can help me solve this problem?

Hi guys would really appreciate some help I’ve recently bought a 250m airless paint pro sprayer assembly was fine I’ve the 517 tip and I’m having serious trouble with the tip clogging , I can only get 5seconds out of gun before tip gets clogged I’ve tried every method I could find online , cleaning it all out, back spraying , using setting powers from 1-5 but it keep happening I’m using brand new exterior weather shield wall paint as I’m painting my garden wall , can someone please help me with this matter as I’ve paid over €550 for the machine and it’s infuriating that I’m having this problem from the get go , would really appreciate any help