I was JUST about to throw my clippers out until I stumbled across this video, tried it and was amazed. Works perfectly and better! You saved my clippers. Ha
Good news!!!!!!!!! Therefore repent and turn back, so that your sins may be wiped out, that seasons of refreshing may come from the presence of the Lord, and that he may send Jesus, who has been appointed for you as the Messiah. Acts 3:19-20 CSB From then on Jesus began to preach, “Repent, because the kingdom of heaven has come near.” Matthew 4:17 CSB “The time is fulfilled, and the kingdom of God has come near. Repent and believe the good news!” Mark 1:15 CSB Jesus replied, “Truly I tell you, unless someone is born again, he cannot see the kingdom of God.” Jesus answered, “Truly I tell you, unless someone is born of water and the Spirit, he cannot enter the kingdom of God. John 3:3, 5 CSB Jesus told him, “I am the way, the truth, and the life. No one comes to the Father except through me. John 14:6 CSB For God loved the world so much that he gave his only Son, so that everyone who believes in him may not die but have eternal life. John 3:16 GNB bible.com/bible/296/jhn.3.16.GNB
@@Wahlpro Good news!!!!!!!!! Therefore repent and turn back, so that your sins may be wiped out, that seasons of refreshing may come from the presence of the Lord, and that he may send Jesus, who has been appointed for you as the Messiah. Acts 3:19-20 CSB From then on Jesus began to preach, “Repent, because the kingdom of heaven has come near.” Matthew 4:17 CSB “The time is fulfilled, and the kingdom of God has come near. Repent and believe the good news!” Mark 1:15 CSB Jesus replied, “Truly I tell you, unless someone is born again, he cannot see the kingdom of God.” Jesus answered, “Truly I tell you, unless someone is born of water and the Spirit, he cannot enter the kingdom of God. John 3:3, 5 CSB Jesus told him, “I am the way, the truth, and the life. No one comes to the Father except through me. John 14:6 CSB For God loved the world so much that he gave his only Son, so that everyone who believes in him may not die but have eternal life. John 3:16 GNB bible.com/bible/296/jhn.3.16.GNB
Found a pair of clippers (Wahl, but not this model) in my closet from an old roommate that left them. The blades would not move when screwed together, was just about to toss them until I googled it and found this. Now they're at 100% perfect with the simple turn of a cheap plastic screw!
Followed these instructions and I broke the casing of the clippers (turned power screw clockwise waiting for the loud noise as described in the video). Thanks, destroyed a perfectly good set of clippers (only reason the screw was off was I was cleaning the clippers)
Just bought a new pair of Wahl clippers a month ago and started experiencing this loud sound last week while cutting my hair. Had no idea what the hell it was. This video is a god send. Thanks
I took seven screws out of my model to completely disassemble. There was a ton of hair in every crevice. After cleaning, reassembling and yes, adjusting that screw, it works great again.
Wow. I didn't like my WAHL clipper, but I just used a screwdriver to adjust the power, align the blades and stiffen the lever and now it's quiet and better than ever. Just wow. You should really include a slip of paper with *ADJUST YOUR CLIPPER BEFORE FIRST USE* and instructions in each box.
Nice video sir! I have a wahl balding clipper and i think that the white vibrator arm has bend. I can not align the 2 blades with each other. It tends to incline from the right side of the smaller blade ( from the left as you look the clipper from the front. ) Any thoughts about it?
While solving noise problem of my 4+ yrs old FYC hair clippers, I adjusted the power screw also with no clue what it was for, and I was wondering why it is no longer cutting properly with blade number 2 placed on. I thought I screwed it up and need to purchase a new one. Now it is fine, Thanks for the help.
Brother, thank you! I can't tell you how many minutes (maybe hours) worth of my life I've wasted watching hair clipper videos, that end up not helping me fix that problem.
I have a weird ass phobia of loud clipper noises i got my wahl designers like 2 months ago and i always seen the important sticker i just never did it cause it said when your hear the clipper make a loud noise😂😂
The power screw on some wahl's have a tab that won't let you adjust it too much , if you find that you need to go past this point you can pry the plastic bit with the tab off completely and underneath it is a normal philips head screw ....
Hi. i live in Athens, Greece. I recently bought a chrome pro deluxe. I used it just today and now that i saw your video, i adjusted the screw as you said and aligned the blades as the manual says but i would like to ask you something and if you please to answer me. Most of the times, not all the times, when i turn it on, it does a noise, a clunk and i think is the upper blades that somehow hit the down blades. Ofcourse is only when i push the button to start and then stops. Is this natural? or it may be dangerous? Thank you in advance. (is my first time that i use something like this)
From Wahl website: When I switch on my mains clipper it makes a loud thud, is this normal? This is quite normal. The motor is electromagnetic and depending on how it catches the flow of electricity, can make a loud noise (similar to a hand clap) when first switched on, but this does not mean the clipper is faulty or unsafe to use.
I adjusted the screw one way and the other, looking at the blades the whole time thinking it made length of hair shorter or longer 😆..i was about to give up on them ( and i take good care of them oil and clean and whatnot) and like alot of stuff im clueless on it popped in my head... GOOGLE IT!!!😂...now they cut like beasts !!
Mine cut just fine for the first 5-10 seconds then stop cutting and its like pulling lightly my hair, i play with the power screw and it works fine again for another 5 or so seconds...
I have an Wahl clip and trim brought neew one to India And I'm using it with conversion volts plug though it sounds heavy . I used to fix the power screw but it sounds higher when I rotate it as you instruction mentioned
My wahl clipper is not cutting well, now when I'm cutting i have to use the each side or corner of the clipper, so i want to know what went wrong with my wahl clipper from cutting perfect as much as possible
It sounds like perhaps your blade is crooked? Or the teeth are dull. My first suggestion would be to apply oil and see if that fixes the issue. If not, try adjusting the blade. If you still have issues, give us a call at 1-800-767-9245 and we can take care of you.
I have a vintage Wahl Solid Small from the 50's it turns on but the blades don't seem to be moving, where would I be able to find information on how to fix older Wahl clippers? Is there chance that tightening the power screw would help?
my wahl clipper just arrived today, plugged it in, turned it on and that LOUD buzz startled me..i thought it was broken..isn't that going to damage the clipper?
Is it normal that these machines vibrate very uncomfortabily ? I had few cheap machines in my life, and bought a Moser 1400 to make a quality jump but after seeing how much it vibrates I would like to throw it out of the window immediately because 5 min of work and I have hand tired. Don't know how could use it for all the day if was a barber. Never had this vibration issue with the cheap machines so I wonder if it's normal...
my wahl super tapers make the loudest noise ive ever heard in my life, my ears are ringing after turning it on, not to mention i almost shat myself with the fright. is this normal
thanks for the reply, i had the power screw almost completely unscrewed and it was still absolutely piercingly loud. I just bought it too so im well pissed off haha
Nice vid question i have a wahl pro elite 220v 50hz running smooth here in uae but if i go back to my country w/c is 220v 60hz adjusting the screw will it run smooth and will not have problems ?
Mine is not cutting, I think I moved something when I tried to clean it, Is there a customer service or a repair shop, I live in NYC. I just dnt wanna dispose my clipper, I'd appreciate it.
I dropped my clippers and chipped one the cutting blade teeth and now clippers are making loud noise I opened checked nothing inside broke or out of place and the loud noise only happens when fully closed is it the blade cause this to happen or is there something I am not seeing I already tried the screw on side did not help any help would be appreciated
I was preparing the speech I was going to give the Wahl dealer dealer for selling me a defective unit. Then I watched your video and it works perfectly. I am concerned that this happened right after 1 trim. Is that normal? The trimmer was buzzing but the blades were moving until I turned that screw.
i am a home user i have very little haire form the back and form the sides (classic bold)1 i dont want a rechargebole machin all i want it is a machin that will cut my haire smootly and will not stuck do you think that wahl w3011 is good for me ?
My wahl 5 star senior gets so hot after 30 minutes. It gets to the point where I can't hold it anymore because of how hot it is. I adjusted the power and cleaned my blades too but it still gets insanely hot
I dropped my clippers today and they started getting loud when I close lever but when I star to open lever the noise goes down I dont know if I broke something inside should I open them up
I had dropped my wahl clipper machine and it done the same thing but it mad a noice when i turned it anti clockwise and still didnt work properly what can i do?thank you
My clippers cut well and i have no buzz problems, but i have that same loud click sound when turning the clippers on. Is that normal or is that too caused by the power screw
Hi, I have a quick question, does Wahl sell the plastic power crew for a senior. I just purchased a Senior clipper and everything is fine but the plastic power screw has been strip from one side. I wanted to know if you can unscrew the power screw and replace it with a new one.
Hello, our customer service team will be more than happy to get this screw replaced for you. Give them a call at 815-625-6525 and they will take care of you.
Hi bro I just bought a new 1919, 100 years anniversary. I've put oiled on it already and it seems to be making a slight rattling sound. Where is that coming from ?
Without seeing the tool, this sounds like an internal issue. Either a screw is loose or it is an issue with the tension spring. Please contact our customer service team at info@wahlclipper.com and they can assist you with this right away.
So frustrating. I have 3 professional old clippers. When i first turn them on they will cut a few big junks out . Then nothing. buzz buzz clatter clatter whatever. But no cut. Hair only 1/4 inch long but all it does is power comb it. Will sometimes cut hair on arm but only power cuts head hair. What is the deal?
I'm assuming you have already tried to adjust the power screw like in the video above? Give our technical support staff a call at 815-625-6525 and they may be able to troubleshoot for you. They can also repair these for you if they cannot assist over the phone.
Hi I have a assume a little problem with my wahl. I bought the black and chrome baldfader machine about 1 2 months ago. And it worked perfect, but this morning after about 10 cuts all in all, it started to do a metalic rattling noise. I saw that the cutting teeth and the big metal plate are not refectly centered to one another. I opened it and I can see that there is a plastic thing that holds the cutting teeth plate in place and it slides on the big plate. But I couldn't solve it and the noise is still there... What do you recommend?
@@Wahlpro I live in Israel. The shop is called k.s.p if you need the name. They are a big importers here so its 100% genuine. Im sure its a small problem just didn't expect it after 10 cuts
Unfortunately I still have the same problem after adjusting the power screw. I also tried to loosen the factory blade tension (mines brand new) and still have that issues.