Walcom Spray gun review (carbon fiber) 

Thank you!!

They are excellent!!

olivier champagne thank you brother!!

When I made this video I was spraying EHP yes! And I was I was using the 3m full face mask here. I switched shops about 9 months ago spraying different paint and using fresh air system!

It’s right around 13 cfm I believe!

Thank you! The car was a Kia Forte koup but I can’t remember the code unfortunately

I like 30 psi for clear! And slow hardener allows for the solvents to evaporate at a slower rate, which in turn will allow for better flow of the product , so long as a long enough flash time is given, it won’t make the clear set up too fast and allows for better gloss overall. It all depends on ambient temperatures really, but if you have a heated booth that stays at a consistent temp, slow can be used year round with no issues!

@@Eric_Kinser thx for the info . I do 33.3 psi on my old devilbiss gti 110 cap . But this week my walcom lite hte clear wil be deliverd . So i try at 30 psi .

@@steventuypens2779 any updates on the gun? Just curious.

@@edwardzx7 i have sprayed 3 cars with it and they look very good . No problems . They feel good in hand and have a nice Spray pattern . The clear 1.2 is much faster then my devilbiss 1.3 .

3M pps 2.0 cups the adapter is a male fitting S9 is the part number!

Thanks 😊🙏🏽

1.3 or 1.4 would both be fine! My clear gun is a 1.3. However I wouldn’t recommend using one gun for both. It will work hit you run the risk of contamination between base coat and clear out of the same gun. Just my opinion!

I just bought the 360 carbonio and I have the sagola 4600. I haven't used the walcom yet but I will let you know. I can get some pretty glassy finishes with the Sagola

I personally have never used a sagola spray gun so I can’t answer your question! But I’ve heard great things about them!

I just used the walcom for a job. It seems to be about the same finish as the Sagola. About the same material consumption. It is definitely lighter. I like the Sagola digital readout in the gun much better

Yes!

Close 2nd would be iwata ws400 evo. But for all around material savings and quality/speed. Walcom takes the win for me!

Carbonio

Break down what you can ( trigger, nozzle),and tape off some ( air valve, and treads on the nozzle). Come up with you own limited edition pattern, or design. Use another gun to clear coat your design. Untape and put it back together. I thought about doing this soon to my Eastwood concours pro gun!

Break down what you can ( trigger, nozzle),and tape off some ( air valve, and treads on the nozzle). Come up with you own limited edition pattern, or design. Use another gun to clear coat your design. Untape and put it back together. I thought about doing this soon to my Eastwood concours pro gun!

Break down what you can ( trigger, nozzle),and tape off some ( air valve, and treads on the nozzle). Come up with you own limited edition pattern, or design. Use another gun to clear coat your design. Untape and put it back together. I thought about doing this soon to my Eastwood concours pro gun!

Probably not! I use this thing every day! I might try to get with walcom and do a giveaway sometime soon!

@@Eric_Kinser would be awesome if you could do so.

I record everything on the setting just below 4K. Other than that it’s just how it comes from the box!