No video :(

Washer Belt Install Trick - How to

Подписаться 2,8 тыс.

Просмотров 169 тыс.

50% 1

www.washerbeari... - Here is a trick you can use after replacing your washer bearings and seal.
Keep in mind if you purchase a new belt it will be very tight and I get the comment that the Maytag Neptune front loader belt part # 12001788 is the wrong size belt. It is not, but it is very tight and this trick will help you get it on!
If your washer sounds like a jet taking off it is time to replace your tub bearings and tub seal.
If you need any other appliance parts besides tub bearings and tub seals or water filters you can visit www.washerbeari... or call 1-800-369-0999 if you're in the states.
Thank you!
Jeff Hartman
"The Neptune Man"
P.S. Visit www.breakthroug... to experience a 14 day training on a work at home solution - no cost - This will change your life!

Опубликовано:

19 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@tomosrostance3278 7 лет назад

Very good video. Mine is a hot point washing machine but essentially the same. Only thing I'd add is that it's that to turn the drum from the rear is tricky so I turned from inside the drum so no chance of catching my fingers/knuckles. This vid saved me a heap of hassle. Thank you very much 😃👍🏻

@HighDesertAdventurer 7 лет назад

had to use 2 ties. That was one tight belt. wouldn't of gotten it on without your tip. Thanks

@WalkerRichmondRanger 10 лет назад

Worked like a charm! Our belt fell off and had no clue how I was going to get it back on. Thanks for posting!

@neptunewaxmotorcom 9 лет назад

You're welcome Aaron! I'm glad that I could help you save some money! Jeff Hartman "The Neptune Man"

@redthunderr 7 лет назад

Brilliant, couldn't have done it without this trick. Especially on my Samsung machine were they had the stupid idea of making the back panel un-removable.

@yellowisbae1868 7 лет назад

Hi, I have a washing machine and the belt came off and I was unable to fit it back on, I watched your video and the tip you gave I now have managed to get it back straight away, Thank-you Kind Regards

@missFindlesticks 7 лет назад

Thankyou so much! I didn't have tie wraps so I wrapped some metal wire around to keep it in place, only took seconds!!! I'm very pleased :D

@patriciakochis1696 7 лет назад

Thank you! we were sure we had the wrong belt. Our washer is working fine now. thank you!

@philmasonx 7 лет назад

That is a top trick using a cable tie - thanks for sharing phil mason

@0xSHINIx0 7 лет назад

hey !! thanks a lot i was fighting 2 weeks and bought 2 belts thinking they were wrong. i would hug you :-p ...thanks a lot and sorry for my english XD