Thanks Bearded Guy! My son found your video and showed it to me. I said “no way. It’s gotta be the solenoid valve.” We weren’t getting water or ice. Well we played around with the switch a bit and Hallelujah! It works! I’m sure glad our son found your video. God Bless you for helping people out.
Thank you !!!!!! Exactly what was wrong with mine! I was getting ready to take it apart to try and thaw out the water lines, after reading many articles saying THAT was probably the cause. You saved me time, money, and aggravation.
Thank you thank you thank you! My husband just spent like 3 hours fiddling with the brackets door etc. he got the door to close better but the water wouldn’t work. He gave up. I found your video, got a furniture pad and fixed it. He’s like OMG! 🤪😂🙌🙌🙌🙌
i would like to thank you! finally got my grandmas fridge working after you talked about that indent being cause. we finally have it working after 2 years of owning it
Thank you!! Took the back panel off and didn’t see the water valve that I expected was bad. Watched your video and the floor protector did the trick. Should have watched this first. Great tip!
Great video! I have a different problem that I hope you or someone can help. I have a new Whirlpool and hooked up a water supply line. Water is flowing TO the Refridge but no water from dispenser or ice maker. Doors are closed and I dont have a switch issue. What might it be? Seems that something is shut off in the fridge. Advice appreciated!
I changed my filter, sputters a bit, but then nothing. Sputters a bit then nothing. I've been doing the every 5 sec on and off for 45 minutes and same results, sputters and then nothing. Yikes, very frustrating.
Great video, I have the same fridge and the Icemaker works sporadically sometimes leaking water (not overfilling, checked that already) I’ve tried replacing it four times but isn’t working. Also the top refrigerator compartment won’t go lower than 40° even after cleaning the coils and checking that the evap and cond fans both work ? I’m out of ideas other than the board being faulty, any ideas ? Thanks for your help
Thanks for your video! I went through all possible parts on mine. Control board main board inlet valve primary and secondary. Filter, still no water or ice?
Very helpful! We have the WRF767SDEM01 Whirlpool gold series. We lost ice maker, water and LED interior lights. It was acting up a couple of times the last year, but now it appears to have broken again. Should we try the switch replacement first?
YOU ARE AWESOME!!!! Thank you very much!!! Those two links for the right and left switches bring up the exact same part. Are they just flipped depending on what side of the frig they are put on?
try the filter already? you start with that. If it is still low you pretty much follow the water until you lose the pressure. Check the wall first and make sure it come out strong and keep going to the water valve or filter housing and check to see if you lose pressure at one of those. It is tedious but that is how you find it.
So bottom line is the door facing was dented and no one seemed to want to fix or repair that, looked for the easy fix, that is a band-aid not a repair, OH where have all the true technicians gone I guess! OMG - Just fix the dent for God's sake!