Тёмный

We Broke our 1000cc Mini Trophy Truck! (But We're Not Sure How) 

CarsandCameras
Подписаться 1,2 млн
Просмотров 162 тыс.
50% 1

We started the day by backing the trophy kart out of it's parking space under my car port, thinking that we'd be installing a 5 point harness and some new rear shocks to help with jumping, but the trophy kart had other plans! It appeared that the transmission was broken- when you put it in gear and let out on the clutch, the engine would stall, and the mini trophy truck wouldn't even try to move. Turns out we had a broken piece in the transmission!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Авто/Мото

Опубликовано:

 

27 апр 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 519   
@CarsandCameras
@CarsandCameras 3 года назад
It'll be back up and running before you know it!
@johnnyrocket6588
@johnnyrocket6588 3 года назад
Yeah most definitely.
@graysonmanning1968
@graysonmanning1968 3 года назад
This is a little random but I just crossed the bridge in Washington and isaac's boat that was tied between the two trees was half sunk
@479.Flyn.
@479.Flyn. 3 года назад
Hell yah brother
@johnnyrocket6588
@johnnyrocket6588 3 года назад
@@479.Flyn. You’re on the cleetus McFarland RU-vid channel
@479.Flyn.
@479.Flyn. 3 года назад
@@johnnyrocket6588 yes i am
@garageofscrap
@garageofscrap 3 года назад
John: “We had to buy a wobbly socket” Me: “hmm. I wonder what happened to their last one” Bronco steering: **says nothing**
@santanadash7571
@santanadash7571 3 года назад
I know I'm kinda off topic but does anybody know a good site to watch newly released series online ?
@leonardcody6967
@leonardcody6967 3 года назад
@Santana Dash Flixportal xD
@santanadash7571
@santanadash7571 3 года назад
@Leonard Cody Thanks, signed up and it seems like they got a lot of movies there :D I really appreciate it!
@leonardcody6967
@leonardcody6967 3 года назад
@Santana Dash you are welcome xD
@unknowndja
@unknowndja 3 года назад
Lol! Y'all finish the conversation about buying and acquiring all the tools you may need and it cuts to Ike taking a bolt off with pliers and an adjustable wrench!
@zkhydro4985
@zkhydro4985 3 года назад
I love that everyone has to prove they have steel toes by beating on their foot. I'm guilty of it too.
@yohanathandowns9057
@yohanathandowns9057 3 года назад
You do that till you hear a "pop". And now your big toe has 1/2 the articulation it used to and it constantly jams out of place painfully.
@mybackhurts7020
@mybackhurts7020 3 года назад
I found out why you never wear steel toes on job sites luckily I didn’t lose my toes it was a small load of truss But it Pinched the top of my toes
@bobadam7021
@bobadam7021 3 года назад
I do that with my bulletproof cup.
@danjim7056
@danjim7056 3 года назад
Kicking a steel pole also works
@donellmuniz590
@donellmuniz590 3 года назад
When ya have the driveshaft loose, I suggest makin a quick wrap of masking tape around that u joint, to make sure the caps dont fall off.
@glenncaughey5044
@glenncaughey5044 3 года назад
‘cause ya need all those bearings!
@bobadam7021
@bobadam7021 3 года назад
I've posted this before but you guys should have a day where you roll out all of your old projects and just rip through them trying to get each one to run, and at least make a loop around in front of the shop.
@karnesrussell
@karnesrussell 3 года назад
Replace the clutch before putting the gearbox in place.
@scottinWV
@scottinWV 3 года назад
Yep! Well, if it needs it. At least put some new gear oil in it.
@MikeSoCal805
@MikeSoCal805 3 года назад
Long time subscriber just wanting to thank you guys for keeping the hobby alive !!! Awesome Content always keep it up.
@averagecarguy420
@averagecarguy420 3 года назад
The transmission: “oh lawd I’m bout to bust”
@conner5611
@conner5611 3 года назад
Bwaaahh
@MrGixxer1300r
@MrGixxer1300r 3 года назад
Glad to see you are adding safety equipment to some of your faster toys. This has been long over due. Some of your stuff is getting scary fast
@AgentWest
@AgentWest 3 года назад
8:27 What do you mean "right tools"?! An adjustable hammer is a perfect tool for every job!
@stanlucas665
@stanlucas665 3 года назад
Damn 😭 It was Ike’s brother. He snuck in while you were sleeping and drove her into the ground. 😂🤪🤣
@dancearoundtheworld5360
@dancearoundtheworld5360 3 года назад
Father and son moment
@drewlee3736
@drewlee3736 3 года назад
I thought the same thibg
@michaelsteiner1574
@michaelsteiner1574 3 года назад
Thanks for keeping My spirits up in these crazy times!
@donellmuniz590
@donellmuniz590 3 года назад
You ended the video that aired on April 28th by telling us about the Pate Swap Meet starting April 22nd! Smooth. 🤣
@vinnyperrotta3954
@vinnyperrotta3954 3 года назад
It’s that time of the week 💯
@martinmcdoniel4551
@martinmcdoniel4551 3 года назад
John and Ike just wanted to say at the wheel on Monday was awesome! Keep the podcasts going! Joined the pit crew and even started a go kart project of my own all with the help of you 2 and Go Power Sports...Thanks to you Both!
@travisking255
@travisking255 3 года назад
Love seeing my initials on the front of this thing. Thanks guys 😂
@jamesmcgee9279
@jamesmcgee9279 3 года назад
Lmao! "Not double clutchin like you should!"
@davidespe8932
@davidespe8932 3 года назад
Sometimes when I'm working I wonder "what are John and Issac doing right now"
@mrichards4724
@mrichards4724 3 года назад
High five from Sydney, Australia 🖐 love the channel guys.
@michaelneff6716
@michaelneff6716 3 года назад
I would love to see the two of you fix that trophy cart and take it to another place with more space to go FULL SEND!!!
@tkskagen
@tkskagen 3 года назад
Can't wait to see the NEW SHOP!👍
@seafoamgarage6523
@seafoamgarage6523 3 года назад
I love y’all’s content I find it so fun to watch😂 keep up the great work guys
@honorrolls5415
@honorrolls5415 3 года назад
You videos are so much fun n what makes them fun in my opinion is your honesty telling it like it is Bill in Fort Wayne Indiana
@tylercarnley453
@tylercarnley453 3 года назад
I swear I get just as excited if not more for rebuild videos than riding videos. Good stuff guys.
@kirkjohnson8589
@kirkjohnson8589 3 года назад
Cool tutorial on the Trans Diagnostics and solution to fix it. 😎👍👍👍👍
@rossdubcak4107
@rossdubcak4107 3 года назад
I love the look on your face when nothing happened.
@JohnHill-jm7tm
@JohnHill-jm7tm 3 года назад
John and Ike the Old Man taking a break from yard work enjoying the video. Always looking forward to seeing what you are going to do next. 🛵😎💝💝
@nelliejones1
@nelliejones1 3 года назад
Ike. Seems to me while watching, that you are passing on knowledge to a capable journeyman. Love watching you guys interact and adventure. Actively looking for a c70. ;) Keep up the good work. Both of y'all. Greg from MN
@handyhippie6548
@handyhippie6548 3 года назад
you need to get some muffin tins from a garage sale, or the dollar store to keep all of those small parts separated when you pull stuff like this apart. you can glue some small magnets to the bottoms with rtv so they stay put.
@robertoszym2
@robertoszym2 3 года назад
Gents, can You maybe try to use 2 brake cables to make gearbox linkage? One will be for pulling original leaver in one direction second one for another.
@josiahruss6963
@josiahruss6963 3 года назад
I love watching this channel. I would make sure that the gray silicone is oil resistant like black usually is. 👍👍
@Violated.R6
@Violated.R6 3 года назад
Y'all always break something 😂, that's what makes this channel fun
@williamlee1429
@williamlee1429 3 года назад
Bringing a vehicle into the shop without pressure washing off all the garbage first. Oh that’s backyard mechanics right there. Love it 😍
@hudsonlong5001
@hudsonlong5001 3 года назад
Love your content man!
@adamr9215
@adamr9215 3 года назад
From the little bit you showed, the chunk that broke off looked like the pad of a shift fork. Makes me wonder if your linkage is producing too much leverage and damaging it when you shift.
@DIYWilly
@DIYWilly 3 года назад
Like you need to put a 212 in that Chevette you have. That would be a crazy fun project to watch.
@jasonjohns5598
@jasonjohns5598 3 года назад
This happens when you wield everything 😂 love the video!
@buckykattguitar
@buckykattguitar 3 года назад
Those transmissions are SUPER easy to rebuild, new parts are still available and no special tools are required. I was a BMW motorcycle tech for years.
@Carolina_Squid
@Carolina_Squid 3 года назад
In one of our drag busa's the trans was pretty rough inside and 2 of the 4 dogs got cut out. Bike runs and shifts great. Roll on.
@wallyhaskett6737
@wallyhaskett6737 3 года назад
Case to case joint clean with some cleaner like brake cleaner (example) the use Honda bond. best bonding for cases you will ever use. No Leaks guys. All your bolts in those cases need to be torqued even if it is not called for in the book. You can get torque specs on the size and thread of bolts. Invest in a nice torque wrench 3/8 or 1/2 inch you will find that you will be using it all the time. Remember the Honda Bond. Great stuff!
@rjc862003
@rjc862003 3 года назад
Your right on your floppy shifter setup was bouncing around on change up and beating the hell out of the tranny slamming the sliders and the dogs is what crushed that
@joshdudley3078
@joshdudley3078 3 года назад
Had a 88 turbo ranger back in the day. I was heading to work one morning went for 3rf gear she locked up tight smashed my knees into the steel dash left me stuck 8n the middle of the road. Great start to the week.
@RichSPK
@RichSPK 3 года назад
I had a couple Merkurs with that Turbo 2.3
@racer6843
@racer6843 3 года назад
Love the CONTENT!
@jaimebadillojrjbj
@jaimebadillojrjbj 3 года назад
Another awesome video guys
@lightcapmath2777
@lightcapmath2777 3 года назад
Great job. love to have seen the inside of the "gear box"... keep the faith. DVD:)
@MrMorepower71
@MrMorepower71 3 года назад
Congrats on the shop build.
@datraktorman69
@datraktorman69 3 года назад
This entire series I have been thinking the shifter was going to cause problems. Finally did it haha,lasted longer than I expected.
@carbide1968
@carbide1968 3 года назад
Yes that long shifter was bouncing the entire time just destroying the gearbox. I just now suggested paddle shifters.
@datraktorman69
@datraktorman69 3 года назад
@@carbide1968 they don't take suggestions at all haha. Really they could stick with a lever,just move it,and shorten it. Theirs is probably one of the dumbest shifter set ups I have ever saw. I get that they were going for a trophy style shifter,but them shifters are gated,cable operated,not just a heavy tube with all the leverage.
@SportbikerNZ
@SportbikerNZ 3 года назад
@@carbide1968 I wouldn't touch paddle shifters with a bargepoll. Awkward linkages required which are always mechanically inefficient given all the routing, and trying to mash the shifter around constantly with just your fingers is tiresome. Never a great system unless it's electronically actuated.
@SportbikerNZ
@SportbikerNZ 3 года назад
@@datraktorman69 Given their vids have a week or two lead time, noobs always think they don't listened when in reality they've already progressed well past that point. Not only that, but 99% of the suggestions are from mechanically inept couch potatoes who don't have a clue, and are thumbed up be equally stupid people. I reckon the shifter would have been fine on a better gearbox. Given it's done 80K hard wheelie miles, the shifter return spring and everything else is probably getting sloppy. Fuss over nothing.
@CJLeTeff
@CJLeTeff 3 года назад
You need to have some type of damper in the driveline to absorb to torque from wide open to letting off the gas. The reverse torque is braking the gearbox due to the extra weight of the kart.
@henryescat1104
@henryescat1104 3 года назад
The small Work Shed keeps tools closer to the work. Equals less walking back and forth time between the tools & the work.
@shaharsdechen2537
@shaharsdechen2537 3 года назад
Here early. Love your vids Can't wait to see the new shop! But the old one started it all. Don't abandoned it.
@donellmuniz590
@donellmuniz590 3 года назад
Wrong. John's mom's garage started the whole thing!
@rev3withme346
@rev3withme346 3 года назад
Hey guys. Love your show. I couldn't find the comment selection on your ct90 feed. You should clean the carb again. Pay close attention to the idle circuit.,.that's your main issue.. ie won't run w out choke on.runs better w wide open throttle...
@Jimbobdro
@Jimbobdro 3 года назад
I would love to see that transmission on a 212 very interested in that i’ve been tooling on a brand new 212 myself waiting on some parts from go Powersports mentioned your name at check out 👌😅
@trunorthroughnecks9140
@trunorthroughnecks9140 3 года назад
I think I will build a few go karts. After watching these guys for a long time I feel inspired.
@joneserupinsmoke9161
@joneserupinsmoke9161 2 года назад
Yous are good yous even look up how to take things apart .usually people only look how to put it back together 👍👍
@bigcaputo09
@bigcaputo09 3 года назад
I was thinking you're shift linkage not allowing the gears to engage all the way!!! Then you said it!! Good call
@magnumcipher4971
@magnumcipher4971 3 года назад
“Two dudes in a dark, damp shed...”. 😬🤣
@edwardweisenburg16
@edwardweisenburg16 3 года назад
Fred flintstone and Barnie Rubble snuck the cart out and took it to the hard rock cafe. LoL 😂
@kirkjohnson8589
@kirkjohnson8589 3 года назад
Lol
@Niko-iq8bc
@Niko-iq8bc 3 года назад
Ha I was just there a week ago
@chevyguy5525
@chevyguy5525 3 года назад
Oh a 4-wheeled 670 build with a proper transmission would be so epic
@greatwhite4755
@greatwhite4755 3 года назад
"you gotta start by removering" lol🤣🤣
@theone2be33
@theone2be33 3 года назад
John needs to change his name to Newton! So when you do the intro "I'm Isaac! I'm Newton!" Would be hilarious
@glenncaughey5044
@glenncaughey5044 3 года назад
They’re not that bright 😁
@lundstromjamtland6273
@lundstromjamtland6273 3 года назад
Hey love your vids and it looks so fun to build a go kart
@TheGreatBigShow
@TheGreatBigShow 3 года назад
You guys never give up. Nice
@tkskagen
@tkskagen 3 года назад
Love to see a Riding Lawnmower Revival, with more SAFETY!
@j-beatsimaginationstudio1987
@j-beatsimaginationstudio1987 3 года назад
hehehe beeping...i thought you were gonna say, its because you guys might be a bit frustrated learning about that transmission hahaha
@gavinmaynor7235
@gavinmaynor7235 3 года назад
Love these type of videos long videos and videos and turn the old shop into a paint shop
@noimdirtydaniel7794
@noimdirtydaniel7794 3 года назад
I can't remember if y'all rubber mounted the engine, but if not you should consider it. It will definitely help cut back on some of those off road vibrations. Might need to re-do the drive shaft though.
@Z_732
@Z_732 3 года назад
I'm wondering if the "slipping" driveshaft joint didn't actually start the problem.. by creating a bind. And under large loads it could cause some serious trouble to moving parts. Even if its not, I seriously recommend fixing that issue while its down. Because I know it dont take too much force in the wrong spot and wrong direction (Im implying a force shoving against the output shaft) for it to cause a lot of minor misalignments inside an otherwise tight fitting gearbox. (Speaking from my own experience building projects) NICE work fellas! Good stuff thanks for the vid!
@drew657
@drew657 3 года назад
Hope you're going to do the clutch while you're in there. It's apart, you'll thank yourself in the future.
@Xxjoker21xX
@Xxjoker21xX 3 года назад
The Shift Lever you have it is over Extending the Shift Forks you need shift stops to keep from breaking the Transmission shift forks AKA Dogs! Also i think as you Ride the Kart the shifter flops Back and forth trying to change Gears it self and can cause issues you need some kind of a shock Absorber to stabilize it!
@oldschoolman1444
@oldschoolman1444 3 года назад
Ya'll need to figure out how to make a cable linkage for the shifter instead of the long shifter bouncing around.
@cokeacolasucks
@cokeacolasucks 3 года назад
18:41 "Who let the dogs out" 🤣
@ireakhavok
@ireakhavok 3 года назад
Breaking stuff again!!!!!! Was just messaging you about this issue.... QUIT BREAKING STUFF, lol This is why we can't have nice things!
@garageofscrap
@garageofscrap 3 года назад
I like the irony of your channel name and this comment
@ireakhavok
@ireakhavok 3 года назад
@@garageofscrap LMAO! I didn't even think about that. This has been my gamertag for the past 20 years, lol
@crowtubecrozier2857
@crowtubecrozier2857 3 года назад
These guys I could hang with all day everyday!
@donellmuniz590
@donellmuniz590 3 года назад
I'd also like to hang out with Derek at Vice Grip Garage.
@letsgopedal4249
@letsgopedal4249 3 года назад
I would love to see what kind of top speed you could get out of a predator 212 with a 5spd. Also it's worth mentioning. I sont know if it's new but at harbor frieght the other day I noticed a new size predator I've never seen before. I think it was like a 305 or something. Be interesting to experiment with. See how similar it is to a 212 or 420. Maybe some of the parts could swap over to push some more displacement out of a 212. I'd also put a new clutch in while your there.
@jamierushing8811
@jamierushing8811 3 года назад
Hi y’all from west Alabama love ya
@keeganwilber5030
@keeganwilber5030 3 года назад
Stay safe guys much love
@codyswilley
@codyswilley 3 года назад
22:24 tall talking over eachother had me dead
@jaymugridge1810
@jaymugridge1810 3 года назад
I'm always surprised how many people work on things that are muddy .. I always try to give my stuff a quick pressure wash before I bring into shop . So much easier to work on something that's half way clean .
@handiman5001
@handiman5001 3 года назад
April 23,24, is before the 28th -- love the vid boys
@mikeythellama
@mikeythellama 3 года назад
i saw you guys at the Pate swap meet, i forgot to ask how the trophy cart was going.... now I know.
@brianmeattey4151
@brianmeattey4151 3 года назад
I picked up a adjustable wrench and it had vice grips handles so when the adjustible wrench loosens the grip tightens it so it don't .it's a must have tool vicegrip adjustables
@waymoretheoutlaw5895
@waymoretheoutlaw5895 3 года назад
A LOT of valuable lessons were learned on this day. But on the bright side it happened at home and not 5 miles from everything on a trail somewhere
@El_Chompo
@El_Chompo 3 года назад
You could really quickly cut some jackstands with the CNC. Just do two A shape plates and then weld them together with some 1" steel plate
@sterlingcollins3077
@sterlingcollins3077 3 года назад
That extra transmission would be so sick hooked up to a 670cc, I would love to see something like that
@averagecarguy420
@averagecarguy420 3 года назад
Could be the heavy shift linkage/stick pulling the shifter arm while you’re driving around, trying to put it into a different gear and grinding. That would explain the dogs being banged up.
@haroldkelley3635
@haroldkelley3635 3 года назад
Sorry I didn't get to make it to Dallas last week. Will make it one of these days. I'm about 80 miles east of Dallas
@joshuablewett4004
@joshuablewett4004 3 года назад
I live in Temple Texas like your guys's episodes
@matthewm9913
@matthewm9913 3 года назад
Need to have Charles come back and join you guys . I mean if he,s gonna take the blame , might as well be there . Lol
@suburban_life
@suburban_life 3 года назад
You used the Chevette rear axle, adapt the Chevette transmission to the engine 🤷😂
@TheEZGZ
@TheEZGZ 3 года назад
just proves life goes on in spite of covid 19. Doesn't matter who broke it. Let's fix it. and life goes on. yeah baby!!!
@anesthetized7053
@anesthetized7053 3 года назад
i hope they keep working in the old shop but clean it up and make more space, maybe put some of the bigger tools in the new shop and have this one be the dirty work and the other one for big fab stuff
@j-beatsimaginationstudio1987
@j-beatsimaginationstudio1987 3 года назад
I have those exact same shoes and they rock BTW
@Stratos53100
@Stratos53100 3 года назад
Suggest changing the oil in the replacement before installation & replacing the clutch as someone mentiioned below.. Missed the Pate show, ( Im in the metroplex ) wanted to go but had to pass, Rain was bad on Saturday, Though im also under the weather so not feeling good.
@DetroitMicroSound
@DetroitMicroSound 3 года назад
The old cinder block shop NEEDS TO STAY PART OF THE C&C complex! (I think Ike's with me, here! It's where the "board" stays.... ...just make it sound, and maybe transition it to studio, and more "cozy" purposes... a place for visitors in future, etc.... You want a tunnel for the prop shaft to move freely within, and have lots of range of movement.
@kaelfuhrman7382
@kaelfuhrman7382 3 года назад
U guys should do vids of just u guys ripping your projects. And a vid showing all of ur vehicle/projects and maybe the plans for them
@TXH1138
@TXH1138 3 года назад
Fix that floppy shifter so your changes will be more precise.
@la_plata3588
@la_plata3588 3 года назад
That thing is junk
@AlienLivesMatter
@AlienLivesMatter 3 года назад
Spring loaded trigger
@ckosacranoid
@ckosacranoid 3 года назад
We really had to wonder, does ike prefer briefs or boxers....boxers it is. Thanks for sharing guys and you should rebuild that gearbox.
@donterackliff544
@donterackliff544 3 года назад
Wow I’m really early but anywho I love the videos been watching you since before the 50$ go kart, keep up the great content
@bengelman2600
@bengelman2600 3 года назад
Dig the mini mayhem shirt!
Далее
We Found a Buried Mini Bike and Slammed It
32:14
Просмотров 211 тыс.
We Upgraded Richard Hammond’s Defender in 24 Hours!
19:53
Reviving our 900cc Ducati Go Kart, the DUCARTI
18:52
Просмотров 248 тыс.
🤣ПОКУПАЕТ МАШИНУ У ДЕВУШКИ
0:35
HONDA ACCORD 😵‍💫 ФИШКИ ГНИЛУШКИ!
0:56