We Made 500hp On Michael's Turbo Single Cam Honda! 

My relative went 11.3 on 23 psi (d16z6) in Spokane, Washington. In 2009. You can do it!!! I believe you! Keep pushing. #huntertuneddddd

Nice! In Wisconsin aswell here, d16z6 turbo 57 trim garrett, 1000cc, eagle /vitaras, bisi springs, comp cam, e85 ~29-30psi 420hp in an eg hatch ran 10.9 @126 😁

I used to rev my boosted JDM D15B VTEC to 9k rpm between shifts at the flashlight drags...lmao It was honestly a really fun single cam and I never had any issues with it other than blowing the dipstick out after a pull due to not having a catch can. After I went B series I gave the D15B to my buddy and he ran it boosted for 2 years before he sold the car, and the guy that bought the car went crazy with the boost controller and blew it up after it having ran boosted for over 40k miles.

Glad Michael got his 500hp!!! That is my goal as well with a single. Good tuning boys!

Congratulations on making 500 @Michaelwiththeredcivic! Pumped for you bro!

Hey Hunter, I just bought Skunk 2 Tuner Stage 3 cams, S2 dual valve springs with titanium retainers, S2 LMAs (it all came in a kit), Mishimoto radiator, Mishimoto black silicone hoses, a Mishimoto 12" fan (also came as a kit), XS Power 3.5" thick front mount intercooler, and all one piece charge pipes. So far I have the dual valve springs installed in the head, and I am currently working on valve to valve clearance.

Congratulations on the numbers man

Awesome that’s pretty amazing good job guys. Hard work and dedication pays off. But instantly wants 600 lol the hunt never ends

WELL YEAH DUDE SPRAYED HALF THAT CAN ON HIS TIRES!!! VERY IMPRESSIVE THO!!

Raise boost cut, lol. Somewhere between 31 and pinned gate should work.

Gotta get some shop pepto lol, good to see progress on Michael's car!

long time coming , I'm excited for Michael

Congrats Micheal on making that jam! I'm drinking a cold one for ya!

Awesome videos as always man👍🏻congrats on 500hp Michael fuckin send it bro!!! Maybe try some belt dressing on the dyno. Thanks for sharing man cheers 🍻

Love that Michael achieved his goal. He’s been through a lot with that car. Should see mid 11s I suspect.

Hey man you should probably get some bigger axles soon on the fox. A cheap way if you dont want a spool is to find a explorer there posi and they are 31 spline. Find a used set of axels and a c clip elim. You can build a beefy 8.8 pretty cheap. Stock 28 spline stuff can only take so much. If it was a manual it would have done broke and probably tore your quarter off because you still have c clips. Very least get the c clip elims so when one breaks you dont die.

You know it's good when the ceiling light shakes

I can't wait! every video i see like this makes me want to shoot for a higher HP number haha

Awesome video

At the beginning of hunter Tuned's videos keep repeatedly pressing the left arrow key. LMAO!!!!! its so funny.

Nice to come on a channel and no one is negative on Honda’s, crazy how we get hated on but we wax dat ass on the streets... js

Screw the daily driver who needs new tires anyways, use the money to buy new race car parts 😎

You're a good guy Hunter !!!! Keep up the great work and your smooth and positive personality 💯💪💪 !!!! Can't wait to boost my D15B

Somebodies gotta say it: FIX YOUR DIAMOND PLATE FOR AROUND THE DYNO Micheal gotta shave a few lbs but 10's aren't far off. To be honest your dyno is probably reading a little high, still impressive. I shouldn't talk, you guys are doing much better than me! Love coming home after work to some new content and cold beer. Sorry for armchair quarterbacking... I'll send some momrenprime pantry before my free membership runs out LOL 👌

With my build I plan to make 500-550 and hope to do it at a lower rpm so that I can have a better power curve and make more torque at lower rpm for better acceleration and long run durability.

Sweet single cam v on boost‼📈😎❤🤙🏽👍🏽🔰

Kids, cupped tires are no bueno... but you can fixem at the track and make them, “mint!”

Hello hunter what setup was in the red d16 built ???

What all was done to the trans to hold up? Does it have straight cut gears or anything

What pistons and rods and stock block or sleeve block

D series 🏁🏁🏁👌

How's that exhaust flow in there with the cars turned around and fan blowing into shop?

Have you seen the posts about the th400s on boosted Ls engines messing up the thrust bearings and causing low oil psi? Something to look into

Clutch slips when shifting gears Hunter - Lets give it MORE power makes sense.

what are the specs on the gtx3071 that you sell? (trim, hot side, etc) looking at picking one up for my z6 build, want 350-400hp and decently quick spooling lol, thanks!

Buddy old ej1 d16 turbo ran 10.5-10.6 all day @ 133-135 mph with around mid 400s. My old ej8 d16 turbo ran 11.3-11.6 with only 386 whp. With your power it should go 10s easily.

Get that thing dialed in 500hp can be low 11s

What injectors are in Michael's setup? Congrats on 100% duty cycle :)

“I haven’t missed a gear”.....RIP LOL

do michael still use factory size d series head studs ?

90th from the UK

I never knew D series take a bit to spool turbos... glad I'll be going B series when I turbo. I also think you should just get new, gripy belts for that dyno. Look like V-belts... can't be too hard to find.

What’s the rod/piston set up in this car?

Michael should easily be in low 11s high 10s with 400hp. I'm at 385 and running 11.6 with a crappy 60ft on pump gas.

What is the build on Michaels civic?

Is Michael running an LSD trans if so which one thanks.

track video coming up boys 😎

#HUNTERBOIZ First!

Cherry berry 🍒👌

👌👌👌👌

Bad dizzy strikes again... The b20v my brother built with a junk dizzy killed the b20v. He tried arguing with me that it wasn't but the cam sensor was bad... Lesson learned don't buy junk ebay electrical parts

dude it looks like your in your basement tuning , sketchy man no exhaust ventilation , is the car even straped down???????????????

Love your channel man, micheals cool af and has a gnarly street car but his cameraman skills......his cameraman skills are friggin horrible, makes me dizzy as hell lol I have border line motion sickness 🤢🤢

Second #HUNTERBOIZ

Upgrade the camera! The gopro is killing your quality man.

That is the ugliest beard I’ve seen on RU-vid son of a bitch Can you do about 2001 Honda Civic LX AT ,Like accord mods or accord transmission