Wedi Shower Systems: 4' X 7' Shower Installation 

I noticed from your video that no wood blocking was installed for potential future grab bars. Unfortunately, foam backer boards alone are not designed to withstand the downward forces exerted by grab bars. I have conducted extensive testing on this issue, which you can view in detail on my channel in video E21. Installing wood blocking should be as standard and obligatory as installing electrical and plumbing systems-essential for safety and reliability. Stay safe!

We are turning a spare room into a wheel chair accessable bathroom with Shower We just purchased a wedi shower kit 48 x 72 .We then added another foot on to it making it a 48 by 84. Used Wedi board for all of the floor and 4 ft. Up the walls We have found it extremely easy to work with Did make a few mistakes but none that could not be easily corrected The Adhesive and 3 inch wide membrane was laid over every seam even in none wet areas on the floor and up the walls in the shower area as well as at the base of the shower and wall I will agree it is a little pricey but when you consider not having to worry about mortor bed being correct, laying the rubber membrane and then painting the walls with water proof stuff plus the fact you can wait about two hours and start laying thinset and tileing opposed to having to wait 24 hours or so it is not that far out of range Will add that we also used pex pipe and sharkbite fittings for all of the plumbing again a little pricey but still cheap when doing it your self I did not find them until today but rather that use 90 degree elbows I would use what is called SharkBite 1/2 in. Metal PEX Pipe 90-Degree Bend Support anywhere I needed a 90 degree The Wedi rep near Houston as well as The Tile Shop in Ft Worth Texas was really great with helping us Would use again if needed to

Wedi best product on market.

Schluter stands by their word and warranties

what happens if the subfloor is not level? They never are....Am i supposed to level the subfloor before installing the wedi pan?

Really? Glue a bench and that will hold? I would be afraid to place my weight on an unsupported corner seat.

That guy just used like $75000 in sealant

Great product but shity tile job

How much does this all cost It looks expensive

These are what the industry wants to replace a good old mud pan with? They require zero skill and are a substitute for craftmanship.

What a joke. Booooo