WHAT FORD DOESN'T WANT YOU TO KNOW! ABS MODULE PROGRAMMING

Подписаться 159 тыс.

Просмотров 401 тыс.

50% 1

In today's video we get called out to program a new ABS module in a 2009 Ford F150 V8 4.6 4x4 pickup truck. Luckily we can do this procedure without using a J2534 pass thru device or an expensive laptop. By using a relatively unknown function available in most professional level scan tools called PMI or Programmable Module Installation.
!!!Please don't forget to "LIKE" the video & "SUBSCRIBE" to the channel!!!
**********************************************************************
*If this video helped you in any way and you would like to donate. Please
Click the link to Donate! paypal.me/adva...
Thank you so much for your support!
***********************************************************************
THINKCAR THINKTOOL PRO Scan Tool
Check it out here! amzn.to/3s6j55G
Use coupon code U37IVJV4 and save 10% offer expires May 1st 2021
***********************************************************************
Visit our Amazon store here www.amazon.com...
to shop for our channels recommended tools and gadgets!
************************************************************************
If you enjoyed this music then checkout Epidemic Sound here!www.epidemicso...
*************************************************************************
*You can email your questions and concerns to advancedlevelauto@gmail.com
Disclaimer:
Due to factors beyond the control of Advanced Level Auto, I cannot guarantee against improper use or unauthorized modifications of this information. Advanced Level Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Advanced Level Auto recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Advanced Level Auto, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Advanced Level Auto.

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 521

@animalmotorsports Год назад

Why are you wearing a mask? And in a vehicle, by yourself... 😂

@JoeOberster 9 месяцев назад

Can the ThinkDiag bluetooth phone scanner work for this? I can't buy a big pro scanner like that one. Do I have to have any kind of software subscription to do this job? I'm jus a dude trying to reprogram my own ABS module.

@Strider9655 3 года назад

A little thing called "first time fix", if there's a fault, they replace everything related to that fault, even if it's not faulty...... And it's all profit, because the manufacturers charge the suppliers for the cost of fault caused by their equipment.

@mv-wb9qm 3 года назад

Had similar issue Ford wanted $1400.00 for parts and labor to replace the ABS module, sent it off myself to a company and for $145.00 they rebuilt it no programming needed. Works great.

@johncabinetman 3 года назад

Where did you send it to

@mrhenry1121 2 года назад

Where did you send it to ?

@yahyaalmallah4019 Год назад

Hey do you guys find water company it was

@Dan-vt1qt 11 месяцев назад

Still waiting for the company's info???

@michellechoe5111 11 месяцев назад

Where did you get it done at? Please share

@scottyvincent 5 месяцев назад

Not gonna watch a dude wearing a mask on video while in the car by himself, that is just stupid. Get a grip on reality dude.

@2damend407 3 года назад

Why you got a face dipper on and your by yourself 😂

@darenhouser427 3 года назад

Why can’t you spell the word, Diaper?

@froglobster Год назад

Are you worried your steering wheel might give you corona?

@ashrafalgadi7373 8 месяцев назад

Today i went through this procedure on the same car the only difference i installed second hand ABS module unfortunately it didn't work... (Module configuration failure) pops up on the scan tool.. Even though the programing succeeded..

@cj1613 5 месяцев назад

Did you ever figure it out @ashrafalgadi7373

@Silentb00 3 года назад

Take off that mask bro!!!

@MattyEngland 3 года назад

He never normally wears a mask. Seeing as he's in somebody else's garage/shop, I'm guessing they asked him to wear it while on the premises.

@darinp5612 3 года назад

@@MattyEngland walk the other way, you're in an open state and outside. Screw the fearmongering.

@MrAnvilacres 2 года назад

Have a little respect for other people

@Silentb00 2 года назад

@@MrAnvilacres To educate you a little there is nothing disrespectful said. I have a lot of respect for Eric and his great videos the man is a great teacher. That being said, if you don’t understand the dialogue that is used and the Latin Culture leave your unnecessary comments out.

@MrAnvilacres 2 года назад

@@Silentb00 at least Eric does have respect for other people.

@johnaclark1 3 года назад

Yeah, neat stuff. A few months ago I did an ABS module on a 2013 ford fiesta. My Autel MS906BT did the PMI, on a used module, with no issues whatsoever.

@jaystaxkx9207 2 года назад

I've got a w013 cmax doing the same thing do you think the procedures are similar? Do you have videos ?

@reneerogers9680 11 месяцев назад

Curious....will this work on a USED replacement module or only NEW/REMAN??

@ADVANCEDLEVELAUTO 11 месяцев назад

Works with used modules also

@steveviscount8566 10 месяцев назад

Can anyone recommend a scanner with tis function? There are so many of them out there hard to know what one will have the PMI FUNCTION.

@cj1613 5 месяцев назад

Did u ever get one with PMI

@txdm9383 3 года назад

Just a note when doing this on an abs module you must have the steering wheel centered with the wheels straight ahead as the steering angle sensor is "zeroed" when the module is programmed so if the wheels aren't straight the zero point of the steering angle sensor will be incorrect and there is no function that I could find at least on my scanner to re-zero the steering angle sensor. I found this out the hard way on the first one I did, luckily I could go back and do the PMI function again and correct it.

@robertmedina6875 3 года назад

Cool thank you for the heads up

@W.Khairi 3 года назад

A true saver, Thanks a lot.

@codyshaylyn 2 года назад

Good information to know thanks for sharing

@daleval2182 2 года назад

Thank you 👍

@mechanicandskills7215 3 года назад

is my thinkdiag the same as your pro scanner except i got the cell phone model ??

@ADVANCEDLEVELAUTO 3 года назад

Yes. Pretty much!

@mechanicandskills7215 3 года назад

@@ADVANCEDLEVELAUTO Thank you

@mechanicandskills7215 3 года назад

thanks so much hoping you do more programing videos just because i got a thinkdiag its really changed my shop

@godprayer1184 3 года назад

No masks needed when particles are smaller then the masks are capable of filtering. All this common sense talk and censorship should not be happening.

@therealdealtech8460 3 года назад

Like I been saying, people need to mind their own business, is that your mask did you pay for it???

@frankzee111 3 года назад

The real deal tech wears his mask when he drives alone 2 🤣🤣🤣

@Suar5379 Год назад

Hey bro, ik it’s been 2 yrs since this video. But hoping you can help. I’m doing the same functions for the pmi, but instead of it configuring successfully, it says it can’t be done. And I bought cardones plug n play module This is on a 2009 f-150 with the 5.2 4x4 platinum trim.

@cj1613 5 месяцев назад

Any update

@ruanfelipe3679 3 года назад

What happens when you don't have the old module?, recently bought the same style truck which has this abs lights problem, but I don't have the old, can you still program it ?

@3613jeremy 2 года назад

Most of the time abs lights are do to bad or dirty speed sensors hook up a abs reader first and if both the brake light and abs could be a simple low fluid or air in the lines

@businesscat2895 11 месяцев назад

MFckrs at an authorized Ford dealer service center recently quoted me upwards of $2,500 to replace the ABS for a 2012 Escape - the vehicle itself only cost me $4,500 and there's nothing wrong with it besides the ABS intermittently throwing B1342-20 for ECU internal fault. They didn't even bother putting the vehicle on a lift, had me waiting almost 2 hours despite me being early for the appoinment then billed me $215 for the diagnostic that actually took them less than 10 minutes while they were working on other vehicles ahead of mine. I could've used that money to buy a used module instead. Thanks for putting this information out there - you're a HERO.

@brjones27 8 месяцев назад

Yeh, after getting quoted 1300 to fix an AC issue I fixed myself with a used $20 part, I refuse to go to dealerships anymore.

@businesscat2895 8 месяцев назад

@@brjones27 update: oh, and turns out I didn't even need to replace ABS module at all. After I recently changed all tires on the vehicle to the same brand/thread the vehicle hasn't thrown an ABS warning code since. Apparently mismatched tires will cause ABS errors but of course Ford tech didn't bother to tell me that or they just didn't know...? Anyhow it's obvious they don't want people fixing older cars so they're forced to buy the new shit. Also related had a hot argument with someone who works at DOT stating it's illegal to do your own aftermarket LED headlamp upgrades (such as on a 2012 Escape) for older vehicles yet it's perfectly fine that every other new car has them now, etc. It's obvious the existing laws were lobbied in favor of the manufacturers.

@brjones27 8 месяцев назад

@@businesscat2895 Interesting... my car JUST had this happen after putting on two new tires. ON the way home from the tire shop, in fact. Still stuck in limp mode right now. :/ Has AWD, and only replaced two tires. May be my issue too.

@brjones27 8 месяцев назад

@@businesscat2895 Yeh, this govt is corrupt. Right to repair/replace/upgrade needs more attention.

@businesscat2895 8 месяцев назад

@@brjones27 if it goes away after getting all matching tires then most likely that's exactly it.

@ke9527 2 года назад

MASKS OFF NOW!!!!

@coydog8426 5 месяцев назад

Great info and video. perfect. short and spot on. Thanks

@dtnel 3 года назад

Saw the tpms light on in dash. In some vehicles I've notice daily codes related to one system can also be tied to another system... uhmmm.. cough cough... gf.. oops meant GM... 🤣😂😉

@honestspirit56 3 года назад

I have a bad abs module and an Autel maxi pro scanner…..so I hope this works out for me after the swap. I hate going to ford for anything! Thank you for the video!

@steveviscount8566 10 месяцев назад

Did it work?

@randytoro8877 9 месяцев назад

Hi I have a 2022 f250 superduty 6.7 powerstroke and took it to the dealer to fix some things and one one is the abs light do to an accident on this truck. So they tell me they jad to replace the hcu/ abs module due to an fault code open Circuit so they installed and now they saying for some reason they couldn't program it to the truck. Now have to wait for another technician to get off vacation to to see if he can do it. I think they trying to find something else to charge me with to make more money off of me. So what the ford secret that they do want us customers to know? Hopefully you can help me. Just don't this dealer to suck all my money. Lol

@randytoro8877 9 месяцев назад

And they charged me $2500 to replace a HCU abs module. This is crazy and still can't program the module.

@cj1613 5 месяцев назад

Hana

@cj1613 5 месяцев назад

@@randytoro8877 any update

@SMAutoRepairLLC 2 месяца назад

Do you know if the snap on verus edge is capable of this PMI I have a 2009 f-150 5.4 and am not finding this in my scanner options. Thanks for your input.

@fredsalter1915 3 года назад

7:27 Whoa! what was that flying object????????!!!!!!! LOL! Great video. Thank you for showing how to program this module. Plus, if you didn't do the IVD, what would be the consequences?

@Gary-oi5ym Месяц назад

I just bought a launch professional 1231 2.0. I don't think it will reprogram the abs module I need to install on a 07 Grand Marquis.

@iaee6687 2 года назад

I have "Thinks can Max TK909" I have checked it multiple times but can't find the PMI function, what scan tool would you recommend I purchase with this function?

@topmonkey6512 Год назад

Hello, I recommend the Phoenix Elite from Topdon to you. I am also using it, and I think it is very good. The functions and coverage of the models are very complete. Here is a video of me using this device to replace and adapt the ABS module of the 2013 Ford Edge: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--lVxkasK7Fc.html , you can refer to it, it may be helpful to you!

@autoinfo9288 Год назад

Geart way u teaching us thank for sharing with us . Also I buy think tool pro I use on GMC many model when I connect vci to OBD port it's distarb the Can system on dash flash ABS and traction any many thinks distrab when I take it out VCI everything get normal did u face this problem withis tool ?

@donwatson5862 2 месяца назад

2009 ford brake and AB’s lights on does kick a code for the module , has power to everything can it just be reprogrammed instead of buying a $1000 module ?

@donwatson5862 2 месяца назад

2009 ford brake and AB’s lights on does kick a code for the module , has power to everything can it just be reprogrammed instead of buying a $1000 module ?

@harvrindrsingh 3 года назад

Hi from dubai thanks you are great 👍. Please share more videos on programming

@stevedeleon8775 3 года назад

All the auto manufacturers have Skeletons in the closet..Most Crooked.. very few benefits for consumers consumer

@yahiyahassan975 8 месяцев назад

Hi, I want to know which one is suitable for my ford expedition 2010/XLT/EL..MINE IS AL14-2C219-DA..and. this model not available.. what is the other model fit for my car

@daveyhogan5332 2 месяца назад

I have the 2011 5.0l 4x4 would control module lock up the driver pads. I replaced both calibers all pad all way around and both front brake hoses. And the front driver side tire is still locked up. The passenger side is a lot more loose. I'm having issues

@diam12345 5 месяцев назад

Thanks for this. What do you know about this message, when I want to install a new Abs Module ? " Abs module not" with Ford escape hybrid 2008. Thank you very much

@mikechiodetti4482 3 года назад

There were many times I tried to do that PMI test, but I would get a message indicating that couldn't be done. Ford does have an "As Built Data" function that worked with the IDS all the time. PCM, BCM, ABS, SRS, it didn't matter, they all worked. The early program had you look up data and manually input the info. Later updated program did all the work. Mostly I used it for ABS and PCM. You could also check for updates if they were there. I did a lot of ABS modules with "As Built Data." Good update and thanks for showing how it's done.

@garygreco3769 2 месяца назад

It's not his car....if he's sick he could spread his cold or covid in the vehicle..why can't you leave people alone? Why do you have to you make people conform to your ideals?Listen to what he's doing for someone .

@cessealbeach 3 года назад

Man you nailed this one, I got this tool

@matthewsmith4599 3 года назад

Hey man how much was the scan tool and how is it? Is it like the ford fds or the honda hds? Do you have to buy the difrentmanufactures software? Or is it included? Tell me more please sir

@cessealbeach 3 года назад

@@matthewsmith4599 Bought it from Amazon, One stop shop, If you need training how to, watch Advance Level Auto Videos. PMI Duplicator. I am not a mechanic, I help my buddy sometimes who has a shop.

@matthewsmith4599 3 года назад

Thanks boss. And everyone needs a friend like you.

@brjones27 8 месяцев назад

Anyone else notice the unusual number of issues similar to this that also have a corresponding TPMS issue, at the same time? I JUST had a tire place fix my TPMS issue on my car. On the way back from there, my car went into limp mode, for no apparent reason. No codes on my cheaper autel scan tool. Idk what to do. Tried resetting the tpms with a special tool. Made no difference. Car starts and drives fine, but power steering is out, and it says I have a problem with anything somewhat related to advancetrac, stability control, etc. out of the blue. When it worked absolutely fine before getting new tires.

@Ed-ty1kr 7 месяцев назад

Anything post 2003 is pure junk, and belongs in a scrap yard. You'll be doing nothing but chasing your own fail replacing sensors, and reprogramming the electronic gizmos that are set up to fail like dominos. ECU fail due to failed ignition coil, that failed due to a bad spark plug, that failed due to incorrect fuel air mixture, that was caused by a clogged catalytic converter or any one of the O2 sensors scattered along the exhaust system. And all of which caused pinging that destroyed the top of any one of or all pistons. Pure idiocy.

@ludacrisjones4252 9 месяцев назад

I got a 2010 Ford focus withe same code B1342-20 I get it scan at two different repair shop first one say the ABS Module need to be replaced cost $1400 second one say the ECU need to be replaced $1500 they both saying two different things what to do?

@GrandPitoVic Год назад

Do you have to program the modual even if using a used one from a junkyard car? From the same year.

@agodlyhome 3 месяца назад

Yes

@skip741x3 6 месяцев назад

Things are sooo easy when you have the tools! wish there was a way to do this PMI process if you dont have a 700.00 scanner! ive heard it can be done with forscan trial software ,a laptop and an ELM scanner? i have those already but the defective abs module does not show options to program nor save its data , no abs asbuilt data shows... it has codes c1267 b1342

@CKBrutus 2 года назад

Just had to do this last month on a 2011! ford f150. It had a cracked mother board in the abs module. Kept getting service advance track. It threw a code for just about everything. It had 39 codes. I new it was one problem causing everything when both exhaust cam/ crank shaft sensors & all 4 02 sensors were supposedly faulty at the same time. I was thinking no way all this is bad at the same time.

@dominicpatricio5408 2 года назад

I have the same problem right now. What codes did you have?

@Sheeeeeeeeeeeeiiitt 2 года назад

Same here 09 F150 king ranch…module refurbished, installed, lights gone…shitty soft pedal still there. Bled and rebled…my wallet

@CKBrutus 2 года назад

@@dominicpatricio5408 Apologies for such a late response but the main code that was the problem was B1596

@CKBrutus 2 года назад

@@Sheeeeeeeeeeeeiiitt yup the wallet takes a hit on that one

@rockymountainmcnair7578 2 года назад

So this may sound weird, but I got blown up back in the day, and I read lips to hear people. You are a grown ass man, lose the mask. It is litterally .002% effective in stopping any virus. I know I probably sound like a pussy for saying it. Im sorry ahead of time, and I thank you for doing these great videos. Please take off the mask when you explain important stuff. Some of us old Army Dogs cant hear well.

@19Dennis53 2 года назад

You are by yourself making a video and you have a MASK ON? Yegadz! Great video BUT it would be easier to understand you WITHOUT that mask that isn't doing your any good anyways!

@JuanLopez-dn8xj 7 месяцев назад

I’m working on a 2013 ford edge sel 3.5 I need to recode the abs module will this scanne tool work? If someone could help me with this information it wood really help me thank you.

@johncabinetman 3 года назад

My local mechanic extracted the files from the old ABS module installed a new module and when he tried to download the files it says the file is corrupt. He then tried to manually load a file and it wouldn't work either. Do you have any suggestions? Thank you.. Oh yeah we are working on a 2010 Expedition 2wd 5.4 liter. Please help.

@flightmedic7169 7 месяцев назад

I have a 2020 Lincoln Navigator that was in a collision and the steering rack has a dent where the module goes and my scanner tells me lost communication. Do you know what I can buy to program another one if I install it ? Thanks

@nosoyono1081 3 года назад

I wander what would have happen if you just cleared all the faults on the old unit?

@gas924 2 года назад

I wish the mechanic shop I took my car YO GET fix knows this piece of equipment (Danny’s boys Arlington TX

@daleval2182 2 года назад

3 generations we all bought F150, as of last series, total BS, full of glitches, corrosion, secrets and cover ups Bye Ford, when supply returns, im switching to chev, or ram, Fords been going down hill,, and the Eco boost dirty valve issue, was last straw for this family

@keithpowers2421 Год назад

I have a thinkscan tool it’s just the Sf100 but it has abs function but it says I have to purchase software? I can get into the abs module stuff but doesn’t show PMI function

@johnmensah7158 Год назад

Hello sir, how do I get the type of Scan Tool you use ,I am a Ford technician I work on both Gasoline and Diesel, I reside in Nigeria

@SUPERPHATBUBBALITE 3 месяца назад

Hay can you please put the part number for the scan tool you are using here because the Amazon like in the description is no good.

@veronicablazevich3472 2 года назад

Dude your in your car by yourself And your making a video. What's up with the mask

@jamesmorris7596 3 месяца назад

Does anyone know if the module has no communication can the new one still be programmed using the tool, or is there another way to program?

@2815Juan Год назад

Can’t watch videos of dumb shots who are scared their going to get themselves sick by wearing a face decoration when their the only one in the car. Geez

@SlingbladeJim 3 года назад

You sitting INSIDE YOUR CAR.............TAKE THAT STUPID MASK OFF

@AdventureOutintheWildreness 3 года назад

Alright bro, I'm interested in the scan tool, but can't find your video reviewing it. I'm currently running the Autel TS608 at the shop. It's okay as far as diagnostic and TPMS goes, but it doesn't do nearly as much as the one you have. I'm looking into possibly getting your scan tool because it looks like it does way more. Have you used it for Immobilizer programming or BMW footwell module?

@TheSgriffith2 Месяц назад

My shop said it would be $200 to program an new abs module.

@thingamajig6542 3 года назад

Seriously dude. Your in a car by yourself making a youtube vid, why you got a face diaper on.

@josephhannold3739 2 года назад

Hey I’ve been watching your videos. My son has a 2013 Ford Edge with ABS lights on. We replace the module and have the original. Does the Thinkdiag do the PMI function to recode the new ABS module?

@danielmarjanovic9957 2 года назад

My question too…. Any luck on getting an answer?

@att5158 3 года назад

The Amazon link isnʻt working. I had to copy and paste.

@thinkcartool3825 3 года назад

It works well sir

@bachirasmar 7 месяцев назад

I had an issue on my ABS module and replaced it with a used one. I used Forscan tool which is very cheap and the software is free (extended Lisence free for 2 months but renewable) . I had the Vin mismatch error U2023 and C1525 and C1524. Forscan (free version) could deal with all of them. The As-Built data is verrrrry easy, one simple click to download all parameters. But The ONLY way to clear the C1525 was using a pressure pump- 2.5 bars(37 psi) and use the Pressure bleed option available on Forscan

@jamesmorris7596 3 месяца назад

was the issue no communication from module, wondering if it can still be done.

@26bleeek Год назад

Smh I just took a abs module back to the junkyard. I thought that want the issue. The lights was still on so I took it back

@jjsbluz6081 2 года назад

What if I don't have the original ABS module? only a Rock Auto Module. Thx!!!

@ADVANCEDLEVELAUTO 2 года назад

Hopefully the place you buy the new module from, can preprogram it. If not, it has to be programmed using a J2534 Pass thru device.

@mitchnerem6759 Год назад

In your car, by yourself with a mask on? Might as well stay home.

@billrimmer5596 3 года назад

That was very informative!! That feature on that tool is really cool!!

@sandeepkanojiya2592 Год назад

I don't have the old module. Than how i can program the my ABS module

@nicholasneri1814 2 года назад

What kind of cheaper programmer that I can use to do my abs module on a 01 Ford F-350 7.3 what does the scan tool need to snag the info from the control module I have to the new one

@topmonkey6512 Год назад

@skip741x3 11 месяцев назад

I had to laugh and please, no offense meant , when the questioner asked if there was a cheaper programmer and the other commenter kindly suggested the Phoenix elite... Bro, that thing is 1,800.00! wayyyyy beyond the reach of most poor souls looking to do this on the cheap...

@christopherlacross6541 Год назад

I ordered the one in your link and it doesn’t program abs modules……

@MrAnvilacres 2 года назад

Will this do that to a used module or does it have to be a new one?

@MrWayneclark29 2 года назад

This is what I am trying to figure out

@stefanos204 3 года назад

Hi Eric. Greetings from Greece . Nice watching your videos and thank you for sharing your knowledge with us

@hughbunyea4703 Месяц назад

Replace the ABS module on a 2017 Ford P. Esta, because we thought it was bad. We replaced it with the used one that was good. And now the brake pedal won't come all the way up and the A. B s light is on

@scotts1862 3 года назад

We are replacing an abs module on a Fusion later this week. I’ll give it a try with our Autel Ultra, I’ve seen the PMI function on other Fords but haven’t had a need for it yet.

@PhillipBailey 8 месяцев назад

Do you know if you can perform a PMI on a used ABS module on a 2011?

@stollenkid9504 Год назад

How much and what is the coupon code and where to buy it . Thanks

@Imtiaz717 2 месяца назад

Can we program used module, please answer ,Thanks

@narsbars9626 9 месяцев назад

Where can I find a scanner to do the ABS that unit is gone at Amazon.

@evelynnunes1191 2 месяца назад

Cómo puedo programar con launch x431 pro paso a paso

@williamGSXR110 3 года назад

Not really a secret. We do PMI to install modules at the dealer. The advantage we have with the OEM scan tool is we don't have to have the original module.

@therealdealtech8460 3 года назад

And last resort and the most loved by ford techs programming a pcm using as built data , and honestly sometimes i still dream about FFFF and more random codes, only ford techs will understand.

@Sheeeeeeeeeeeeiiitt 2 года назад

Either of y’all mind sharing your approach/experiences regarding bleeding/servicing the system once a module is installed? Lights on dash are gone but the soft/spongy pedal, poor bite is still there. Anything I should have done specifically? 2009 F150 king ranch…Thanks so much for any feedback.

@danieladamson5311 2 года назад

Soon as I seen you sitting in a car with a face mask I turn your video off

@bentnickel7487 3 года назад

I guess if I had your $900 tool in front of me I could follow along, but if Ford doesn't want me to know, I'd say their secret is still safe.

@dodgeplow 3 года назад

Same would be true if you didn't have a set of wrenches. You need the right tools

@solarfall2728 3 года назад

Ford makes programming data available. You would have to enter it manually, but its not that bad.

@dominozonda 8 месяцев назад

@@solarfall2728can you elaborate?

@derondarius 3 года назад

Would this process apply to a 2010 Buick LaCrosse?

@stevenzembriski6761 2 года назад

Why are you wearing a mask in the car? Hiding your identity?

@davidhoover8862 3 года назад

Why the hell are you wearing a mask while doing this video?

@rudybishop9089 3 года назад

Who wears a mask inside a car - alone ? Ha ha ha !

@therealdealtech8460 3 года назад

Ha ha lol , where is the car in the video??? Im sorry to tell you but thats called a truck.

@rudybishop9089 3 года назад

@@therealdealtech8460 that’s all you got ?

@darinp5612 3 года назад

dude, why are you wearing facial underwear?

@adamkoza1086 3 года назад

I give you a thumbs down just because you wore mask

@hermanrogers1325 2 года назад

And all this will cost well over a thousand dollars If not two thousand

@ronpollockdrywall 3 года назад

Um...your wearing a mask...go get your 20 shots

@billyclubbandit 3 года назад

Sounds like they put a used module in it.

@jadielcarl9025 3 года назад

i know Im kinda off topic but does anyone know of a good website to watch new series online?

@titustyson7754 3 года назад

@Jadiel Carl lately I have been using flixzone. You can find it on google :)

@terrancefinn1303 3 года назад

@Titus Tyson Yea, have been watching on Flixzone for years myself =)

@jadielcarl9025 3 года назад

@Titus Tyson thank you, signed up and it seems to work :) I really appreciate it !!

@titustyson7754 3 года назад

@Jadiel Carl You are welcome :)

@meewashgreen8829 Год назад

Hi, why you in the mask ? You are alone in the car??

@Halfassit 3 года назад

mask? all by yourself... stopped vid pass

@billyyoder8171 3 года назад

Thank you Eric. Good job. Have a blessed and safe week to you and your family.

@Demo99997 2 года назад

way are you with mask you are alone in front your phone

@busterworley8418 2 года назад

So why in the hell Do you wear mask in the car.

@crodz530 28 дней назад

Good stuff bro. THANKS!!!

@deonwilliams3228 7 месяцев назад

so if that part is mess up the truck will not start