Тёмный

What is Wheel Offset and Backspacing? What will Fit on your Truck? RAM 2500 35"x12.5"x17" 

Fort Knox Co.
Подписаться 22 тыс.
Просмотров 12 тыс.
50% 1

Before & After ! Wheel Offset Explained and a detailed look at what's happening.
Grab some Fort-Knox Co. gear, Visit my website: fortknoxcompan...
I'm swapping out the stock wheels on my RAM for some similar sized wheels but changing up the OFFSET. So when doing this and wanting a specific look, like I think most of use are, You need to know what's going to happen when you start picking different offset wheels.
Long story short I'll put it this way......
A Positive Offset (+) will bring the wheel and ultimately the tire closer into the wheel well , closer too the center of the truck... It will suck the Tire into the truck. "Adding" it to the truck.
A Negative Offset (-) will push out the wheel & tire, pushing it further out of the wheel well, away from the center of the truck, repelling the tire from the wheel well, "taking away" the wheel or removing it from the wheel well.
Negative Offset giver you more rubber/wheel outside your wheel well.
Offset measurements are usually given in millimeters so when you see -44 they are referring to 44mm.
Here's a conversion for you to understand:
25.4mm = 1"
Some very common negative offsets you'll see on new wheels are:
-6mm = .23"
-22mm = .86"
-44mm = 1.73"
A lot if not almost all vehicles have a positive offset on factory wheels. This is why when even going to a Zero (0) offset it will push your wheels out from the vehicle. And when you go to a -44mm from let's say a +44 offset like in my case, this would cause the wheels from a stock setting to be pushed out a huge 3.46". That will be a pretty big visual difference.
So Google your Year/Make/Model and use the words Stock wheel or Factory wheel Offset and find out your official starting point on your ride, or even call a good tire shop and they should be able to tell you. Then you can make an educated decision on what your next set of tires and wheels will be and you'll be happier than can be. I love my set up and they were Exactly what I was wanting. Here's some links to the wheels and tires incase you are interested:
8x6.5 Bolt Pattern- Ion Alloy Style 171 Matte Black Wheels:
amzn.to/3LuSNok
Falken Wildpeak MT01 Radial Tire - 35x12.50R17:
amzn.to/3nmLSFM
Some of these links are my Affiliate links and will take you directly to the items I'm using in the videos or installing. They are at no additional cost to you, but if you decide to purchase through them I'll receive a small commission. In some cases you will actually receive a discount for going through the links I provide. Just wanted to let you all know and that I appreciate your views, your LIKEs and all the support.

Опубликовано:

 

4 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 32   
@Latin__boy
@Latin__boy Месяц назад
This video clear up all my confusion thank you for taking the time to make this video now I know what wheels I’m getting 💯💯
@FortKnoxCo
@FortKnoxCo Месяц назад
For sure! I had a bunch of questions and figured other ppl did too. So wanted to take some of the guess work out of it.
@newgtguy
@newgtguy 10 месяцев назад
If you went with something like a 16mm to 24mm offset, you would have avoided all rubbing/trimming with that size wheel and tire combo. FYI for anyone reading this... 👍
@FortKnoxCo
@FortKnoxCo 10 месяцев назад
Thank you ! Good information right there. I still get a little running at full turn 😞
@johnnyfinance
@johnnyfinance 29 дней назад
Thanks for sharing! Im working with 18mm offset. No Leveling kit on 2018 2500 with 4x4 pkg Im looking at 3 options, think I'll get to fit with zero rub or cutting? I dont mind a little plastic trim, but want to avoid pinch well and control arms etc 325x60x 20 ( 35.4x12.8 Inch) 35x12.5x20 35x11.5x20
@bretr427
@bretr427 Год назад
18 x 9 +1 offset with a 32" tire coming for my 2500 was hoping for just a little poke out of the tires and I think I made the right choice. Thanks for confirming 👍
@FortKnoxCo
@FortKnoxCo Год назад
How wide are your 32’s ? With my zero offset I and 12.5” wide I have this almost 2” reveal. So you should have some if you have a 10.5 or 11.5 wide tire.
@gearslapper93
@gearslapper93 10 месяцев назад
Nice video! I almost went with a -12 wheel, but realized I didn’t take in account the offset of the ram 2500, ended up with a positive 18, sticks out about half the amount of yours
@FortKnoxCo
@FortKnoxCo 10 месяцев назад
Oh nice! Yeah either way it should have a good look. I may throw on some fender flares Or something down the road.
@adamcope9415
@adamcope9415 Месяц назад
Great informitive video
@FortKnoxCo
@FortKnoxCo Месяц назад
Thank you 🤙🏼 was hoping it would answer some questions I know I always had when searching for new wheels and tires
@paulwarren1586
@paulwarren1586 Месяц назад
I run 17x8.5 (-6 offset) and or 17x9 (zero offset) with 315-70-17 on my 2012 RAM 2500 CTD, I also run 17x8.5 (+18 offset) with 37x12.5-17's on my 2024 Tradesman Power Wagon with no rubbing lock to lock.
@FortKnoxCo
@FortKnoxCo Месяц назад
That’s great information for everybody. I know a lot of guys ask these same questions about what will fit and what looks good. It’s always helpful to hear exact numbers and if you’re able to showing people pictures of what to expect. 🤙🏼🤙🏼
@ronschoales2549
@ronschoales2549 6 месяцев назад
That was a great explanation ! Thanks
@FortKnoxCo
@FortKnoxCo 6 месяцев назад
I appreciate it 🤙🏼
@SquadUp1019
@SquadUp1019 2 месяца назад
GREAT EXPLANATION 👍🏾
@FortKnoxCo
@FortKnoxCo 2 месяца назад
Thank you 🤙🏼
@SquadUp1019
@SquadUp1019 2 месяца назад
@@FortKnoxCo YW
@johnmichaels4330
@johnmichaels4330 8 месяцев назад
Damn, i was looking to do 20in wheels but i think ill go 18 after seeing this. I like all that rubber. Might make my 03 ride a less like a pissed off bull. Lol.
@FortKnoxCo
@FortKnoxCo 8 месяцев назад
Haha. I feel ya on that. Yeah the more rubber look in my opinion looks more aggressive and it has the better ride. Less worry about hitting something and it pinching the tire too. It’s a clean look for sure.
@adventure-overland
@adventure-overland 6 месяцев назад
Nice truck! You mentioned you do some towing do you see any drawbacks with the 35s while towing? What gearing are you running?
@FortKnoxCo
@FortKnoxCo 6 месяцев назад
I haven’t noticed any major differences. I have the stock gearing. Haven’t changed anything there. And I haven’t had any repairs. Just the usually maintenance. I also don’t slam it while I’m towing. I try and tow “responsibility” and don’t push it. Obviously the gas mileage will be affected slightly but not by much. I think the truck rides better just having some more rubber under it in my opinion
@johndehan751
@johndehan751 10 месяцев назад
Did the 35s on stock rims rub
@FortKnoxCo
@FortKnoxCo 10 месяцев назад
Yes. Even with these new ones and the negative offset I had a tiny bit at full turn.
@PS3COLOURS
@PS3COLOURS Год назад
question is it safe to put 35 x 12.5 or 37 tire on 17inch wheels stock dually tires
@FortKnoxCo
@FortKnoxCo Год назад
The size of the wheel to the size of the tire isn’t much of a concern. 17” wheel are very common and if the tire is made in that combination then it’s intended to be used with that size tire/wheel. The Dually doesn’t really change anything. It’s actually more safe usually because of the increased wheel base and ground contact. 17” wheels and 35-37” tires looks really good because of the beefyness of the tire. Lots of rubber.
@dieselfred8084
@dieselfred8084 6 месяцев назад
Seems like everything rubs... i wanted -44 on stock
@FortKnoxCo
@FortKnoxCo 6 месяцев назад
Yeah. I have a little bit of rub but I also haven’t trimmed anything.
@robertsteven1003
@robertsteven1003 8 месяцев назад
Out of curiousity, did you use hubcentric rings?
@FortKnoxCo
@FortKnoxCo 8 месяцев назад
Nope. Just the new wheels with the offset and the new tires. New lug nuts. That’s it.
@eljefe8328
@eljefe8328 Год назад
Thank you for this video. Helped me decide on wheels for my 16 ram 2500. 🫡
@FortKnoxCo
@FortKnoxCo Год назад
Nice! That was the goal. I’ve always had questions on exactly what number I should get in. What number will give me a specific look. So once I did all the research and physically did it myself I wanted to try to show people of physical representation of what these numbers mean and what you’re gonna get when you put it on different vehicles. Glad I could be of help.
Далее
What is Wheel Offset? (Quick & Easy Explanation)
3:27
Просмотров 201 тыс.
LOLLIPOP-SCHUTZ-GADGET 🍭 DAS BRAUCHST DU!
00:28
Wheel Rim Offset Explained
14:47
Просмотров 857 тыс.
What is wheel offset and why is it important
4:18
Просмотров 169 тыс.
Mistakes “Pro’s” Make Buying Wheels and Tires
8:50
What Wheel Specs Do I Need to Fit 37's on a RAM?
3:36
Просмотров 124 тыс.