What Wheels Fit : Subaru WRX (2008-2016) 

Thank God it's Alex from Fitment Industries, welcome back, we missed you

I’m glad my narrow sedan was recognized here, not many people like it but I’m in love with the slick look to it

We are all happy to have you back safe and sound Alex from Fitment Industries.

This couldn't have been a more perfect video for me.

From a 14 Wrx guy, thank you Alex. Very much. Just like all of your other videos, very helpful. Love what you guys do. Keep up the good work. P.S.....Now i can finally get the correct tires and wheels for my new airlift setup. Much love from Nor Cal.

This actually helped me a lot. Keep makin these vids!

THIS is a good series idea

Truly appreciate this!! Super helpful!!

I love this video! So helpful. Thanks I have an 08 wrx

I have an 08 WRX that is basically stock. This past spring I went and got some 17x7.5 with an offset of 40 and run stock tire size of 205/55r17. The fitment is great. The tires have a slight stretch to them and the wheels come right to the edge of the finder well. There is still little gap between the tire and inner wheel well because of the stock suspension, but that's the look I wanted.

THANK YOU! From a fellow subaru owner!

needed this video. thanks 🙏

Subscribed you guys are the best 👍

Yes please do more of these, do one on 15-19 mustangs

Very useful!!! Thank you

Wheels that fit vw like the jettas passat or all vw in general keep up the good work

Thank you. I have a 2012 with 9.5x18 +45 and fitment is dead on. Rocking the wedssport SA-54R BLC2 on a WRB WRX Hatch. (That Blue Light Chrome is unbeatable) I do need to fix up the fenders, probably roll them due to some rubbing, but it isn't bad.

Fricken sick.

Glade you guys came out with this series You should do a third gen mazda 3 next

2014 Subaru wrx on stock suspension Cut fenders and no fender liners Rims 18*9.5 +34mm and a 25mm hub adapter Tires 265/35 Rubs slightly when the wheel is locked left or right in reverse

doing the lord's work right here...

best vid so far

More 👏 of 👏 these 👏

Can you do a video like this one for a 10th gen Honda Civic si please!? awesome content man keep up the great work

2015-2019 Mustang. This would help a ton!!!

2002-2007 wrx waiting on it 😤💖

Awesome

2011 wrx hot boi here. I've run xxr 527s 18x9.75 +20 w/ 225/40s, -5 camber all around, slammed on coils with minimal rub after a roll and slight pull. currently have been rocking enkei RPF1s for a couple years. 18x9.5 +38 w/ 275/35s, -2.5 camber all around, not slammed, but passes the mcm shoe test. Never rubs. Having run both styles of fitment, I highly recommend going with the meaty fitment with a realistic ride height. Drives so much nicer, no rubbing, much much less scraping, don't have to worry about tires debeading as easily, and you can mash on the twisty roads with no issues. just my 2 cents.

Can you please do this for the Evo 10 as well love the videos keep up the good work

Acura Integra DC2/DC4 They ran for 1994-01 so there’s a lot of them out there

I remember my first set of high end rims: Advan TCII 17x8.5 et37 on 245/45/17. My goal was to have wide rims and tires, to maximize width. I tried to do as much research as possible. In the end, I got a mean looking RSX-S. However, I still wasn't there. Why? I needed to do more research. I ALMOST got the look that I wanted. Then, with the 2nd set of rims, I knew a lot more. I went with a larger and more aggressive set up: 18x9.0 et25 on 245/40/18. Now, this was the look I was looking for. I thought I knew a lot at this point. However, my ride was harsh because of rubbing, in the rear, so I decreased the pre-load on my coilovers. The ride was abysmal. What I never realized is that I could of just added some negative camber, in the rear... to maybe about -1.8 degrees and I wouldn't rub and my ride would of been close to stock. However, according to the community, that level of camber would be tire eating in no time. I believed the hype. However, I learned that it's not negative camber (as in, out of factory spec but not crazy camber) that eats tire but the toe. Well, I know own an Accord V6 with Advan RZII 19x10.0 et35 in the rear on 275/35/19 tires. I have -3.0 camber and I have 30,000 miles on the tire. No uneven wear. Granted I'm on a Tein coilovers and 3-piece camber kit. The moral of the story: fitting rims takes a lot of knowledge. Do your research. Alex is throwing a lot knowledge. There are so many variables to consider. To summarize: 1.) Learn about width, offset (+ and - offset), wheel construction, concavity (those Advan or Volks that you like on a website or on a car, well, chances are they have low offsets which mean they come in a more concave face... so when you buy a 18x8.0 et 45 version of TE37's they're not going to look as good as the 18x9.0 et 25 with a lot more concavity). 2.) Know what kind of look you're going for. I love the look of stretched tires. Yes, it looks really good in some cases like 215/40/19 on a 19x9.0 rim. However, like a cheap whore whose going to give a STD, you're going to accumulate a lot of curb rash. Thus, the reason I never go stretched. If I'm spending $3,200.00 on rims, I want to take care of them. 3.) Research the sizes on forums and then research some more. 4.) Chances are that you're going to need to know a lot about the ancillaries to make your rims fit: like available camber kits, coil-overs, rolling fenders, lug nuts (yes, there's a lot to learn about lug nuts), and so forth. All these other components can make impossible fitments possible with ease. 5.) Go back to 1 and start all over again.

please do the brz/frs/86 next!!!!!!!!!!

Please do MKIV Supra. Love your videos.

This video is rad. Can we get a FRS/BRZ/GT86 setup next?

Nice vid! Could we get a 1st gen focus hatchback vid please?

PLEASE do this for the 370z!!

2018+ STI ...6pot front calipers. what wheels would be best for daily/spirited driver...?

Soooo helpful! But you didn’t talk about MY09 enough! What tire size would you recommend with an 18x9 +22-30 setup? Only just found this channel and I’m loving it!

Once again great video. Have been on the fence about new wheels. Also any tips on coilovers paired with 18x9.5 wheels?

Would love EVO X next

@Fitment Industries Please do earlier Subaru WRX models!

This is such a great idea for upcoming videos. very helpful. nice.

You should do a video on the MK7 platform with 17” wheels and some meaty tires.

Would love to see a video like this for my 2008 Mazdaspeed 3. I'm buying a set of 18x8.5 +40 and would like to know what's the most meatiest tire to run without major modifications. I would like to avoid any camber changes. I would consider rolling or pulling fenders but would rather not. 235, 245 or 255 is what I was thinking. Any suggestions would be great. I'm on coilover that have lowered the car about an inch or so already. Thanks for your assistance.

What about for us bois wanting to roll with a 2002-2007 wrx? Those are my favorite generations

Mk7 Golf GTI, BRZ/86, EG6 Civic, Silvia S15

Must do Evo 9 😍😍😍

So I have a 2013 wrx and want to stay in the 17s what are my options ? I'm stock and going to stay stock :)

No one gonna talk about that painter's tape wrap job @1:30 ?? 😂

I have a 2019 wrx on 20X9 +35 offset on stock suspension it looks decent, I live in Chicago so I haven’t lowered it due to snow and potholes lol

This video probably addresses 70% of the inquiries FI get. I'm sure we'll see more of these for popular cars. I'll suggest the MK3 focus since it has such a wierd pattern.

Scion tc next please...would be very helpful coming from you guys.

So will an 18x8.5 + 35 with the tire configuration you listed in this video fit a 2010 WRX without rubbing or rolling the fenders?

Please do a video on what wheels for the 10th Gen Honda Civic Hatchback

You should definitely do one on an NA Miata

Could you guys do a first gen TSX? (04-08)

You did subies. So you gotta do the evos too🤙🤙

2018 Subaru wrx. 18x9.5 +35. 255/40/18 with rolled and pulled fenders and I rub a little on hard dips.

Ordered some Enkei rpf1’s 18x9.5 +38 SBC for my 11 WRX, what should I get 255/35r18 or 265/35r18?

Do Mini Cooper S please! Nobody talks about these cool go-karts

Should do one of these for a 06-12 eclipse 4g

Acura TSX/ TL next please would be very helpful!!

What do you guys recommend on a 13 wrx with flares? I’m looking for a flush look and no rubbing if that’s possible.

Srt4 Neon!

PLEASE do the current gen civic 2016-2018

I have a 2008 impreza hatch(same body as 2008 wrx)with 16 inch stock rim. But I'm planning for a set of 17 inch wheel for trackdays. May I have some suggestions? Thx

What if I just have stock 2014 STI and plan to stay stock heighth and want as wide as I can go with sticking to a stock offset. But want as much poke as I can get without any rubbing issues at anytime any situation?

Rip I dont have my narrow body wrx anymore, 2013 Veloster turbo next ?

2008 wrx but I plan on doing the brembo upgrade so offset do I need in order to clear the calipers?

Jeeeez I’ve got 265’s on 18 x 9.5 + 35 on my 2012 sti

What about an aggressive look for 2006 factory setup with big break kit, thinking 18x9@35 os with 245 size tires?

E9x M3 would be AWESOME

2012 WRX.. 18x9.5 what other offsets will work? Stock calipers. STI Hub swap. So running 5x 114 bolt pattern

My 2011 WRX... 18x13 -13 on 335/30R18. Not a tilty wheel boy, tucking under my widened fender. Do I fit the mold?

Would this series apply to the 2015 Subaru Impreza sedan.

*OH MY GOD DO THIS FOR A 350Z PLEASE*

I have a 2017 base model Impreza and wondering if an 18x9.5 +30 fit without rolling my fenders? It’s not lowered...yet

2015+ Sti please! Clearing the brembos

You should do one of these videos for 350z/370z’s

Do one for the 9th gen accord (2013-2017)

What about 2013 wrx stock 17 ?

Could’ve used this vid when I was wheel shopping for my Impreza, went with 16x8 +20 offset ....

Can you do one of these on the golf r pretty please

Honda s2k next please

Planning to buy wheels on my 2013 wrx sedan i wanna buy work miester but i wanna know what size would be good and not strectch, maybe a little but buy functional

Do g35s and 350z next.

Make a video about the ssr mk1 3 piece wheel

Can you do one for an mk4 jetta...pleaseeee

What Wheels Fit: VW GTI (MK7 2015-2018) NEED THIS PLEASE!

Let’s see a Focus ST/RS feature

Do you gotta roll fenders on a 15+ for the 265 tire? That seems a little big

possible to fit 17x9.5" +30 with 295/30/17 on a 2013 wrx without rolling fenders or any mods at all?

Love your videos, love you guys! Do Evo’s please!! :D

Do one of these for the e46 m3! I want to get new wheels for my m3 on my channel!

My wrx hatch is almost paid off. I might need some wheels🤔

Alex how I missed ya!

Can I fit 2019 sti wheels on my 2014 wrx hatch with spacers adapter ?

So I'm switching to cosmis xt209r 18x9.5 +10 offset on a contential 245/40 I have coilovers and camber playes will I be ok? Thanks

I have full stock 2015 wrx sti, what is the best setup for it? Thinking about 19inch wheels

Please do this for a Lexus sc300/ Toyota Soarer 🙏