"Why do I need a clutch kit?" By EPI

Подписаться 8 тыс.

Просмотров 387 тыс.

50% 1

LISTEN and LEARN. EPI has been the industry leader in CVT Clutch tuning for over 20 years and we've made it our goal to educate enthusiasts like yourself about the importance of recalibrating your clutches when you add bigger tires or more power to your machine. As soon as you change to bigger/more aggressive tires or add more power to your machine, you need an EPI Clutch Kit to recalibrate your CVT system so your machine performs the way you expect it to.
Visit us online at www.EPIperformance.com

Спорт

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 372

@williamsantiago7303 7 лет назад

Thank you for the reply.I will ride it some more this weekend and really put some miles on it. When I put the kit on I only went up the road and back and parked it but like I said I'll put some miles on it this weekend and C how it performs. Thanks for the help bud, take care.

@EPIperformance 11 лет назад

I would install out sport utility clutch kit 27-28'' tires. Depending on the year and if it has EBS would determine what exact kit you would need for your model.

@biggrizzlyoutlaw2958 10 лет назад

I have a 2012 Grizzly 700. I am running 29.5 Outlaws. What kit do you recommend? I don't want to lose a whole lot of top end.

@stevenlambert4008 6 лет назад

What kind of clutch kit do I need for my 2012 can am outlander xmr I have fuel programmer on it looney tunes exhaust mr rpm heads I have 29.5 outlaw 2 tires on it all I do is mudd ride

@hutchins36 11 лет назад

thanks, just pulled the clutch cover off and there is an oil pump assembly/passage ways behind the clutch are broken, but it looks like it can be replaced, but i cannot remove clutch it needs special tools.

@EPIperformance 14 лет назад

@2trx400ex2 We would suggest going to the EPI economy clutch kit WE497030 which will change the wet clutch springs. This will give the machine more low end power and a faster throttle response. It will help to get the bigger tires moving. If you are always in the mud you can go to the competition stall kit which is WE497212 for the maximum low end through the clutches.

@TC72280808 10 лет назад

I have an 850 xp Polaris. Factory except the 27" Zillas. I just do general trail riding but I am aggressive. In 3 months I have already replaced a belt that got burnt from slipping. Which clutch would you recommend.

@garmonkids997 8 лет назад

I have a 2016 brute force 750 and am putting 29.5 inch swamplites on it. I mostly just do trail riding but occasionally hit some deep mud holes. I would say 50% of my riding is cruising. Which kit would be best for me to be able to trail ride most of the time but have to grip when i need it in a mudhole?

@EPIperformance 11 лет назад

That kit will really help your belt grip and also at the same time better response and backshifting.

@EPIperformance 11 лет назад

Our utility kit comes with 4-500rpm stall springs, roller weights, and a secondary spring. The competition stall kit comes with just wet clutch springs that stall out to about 8-1000rpm.

@cableguy657 14 лет назад

Great set of videos

@TheBonecollector46 10 лет назад

i got a 2006 Polaris sportsman 450 with 2 inch highlifter lift on 29.5 outlaw 2s what kind of clutch can i get to make them turn better

@urinesoakedtroglodyte5764 3 года назад

I have a 2001 Polaris sportsman 500 H.O what clutch kit should I get? Also what kind of stator should I get? mines gone bad and is draining power from my battery

@MrChrisb83 10 лет назад

got a 2014 rzr800 running 29.5 I ride 50% trail hills rocks and 50% mud wanna get more low end power don't care if I lose any top end speed like my power down low what kit do you suggest?

@hunterwolf8443 Год назад

I have a 2023 sportsman xp 1000 with new 28 inch terminator tires , I do alot of snow riding and im going to be doing mud riding witch clutch kit will work for me ? Thanks

@EPIperformance 11 лет назад

We also have kits that will work better for the mountain rider as well. The backshifting will be much better for doing any type of climbing.

@EPIperformance 12 лет назад

I would suggest going with our 27-28'' Sport Utility kit Should get you where you want to be but you will lose a bit off the top end with it.

@EPIperformance 11 лет назад

There is originally from Polaris silicone on the backside of the cover on the motor side and that may be leaking and not the cover seal that really is all I can think of if not wanting to use silicone or snorkels. You may want to use dialectic grease on all electrical connections to help with corrosion.

@EPIperformance 11 лет назад

I would suggest our sport utility kit for 27-28'' tires. you will still keep your topend but gain bottom end response and better backshifting.

@noteruc 11 лет назад

Great videos and illustrations, thank you! I'm getting ready to install a new kit on my 2004 Polaris 500 HO. I have 29" tires now and it cuts out when I'm in reverse, no power. Question: Is this a clutch issue that may be resolved when I change to the new clutch kit? Thanks again!

@southernrebel69420 11 лет назад

ok thanks. btw what about a rubber seal for the clutch cover instead of the foam one do they even make those

@EPIperformance 11 лет назад

I would go with my sport utility 27-28'' tire kit. I would give you the specific kit number but I don't know the year of your machine.

@EPIperformance 12 лет назад

I would strongly recomend our mudder kit. That kit should get you to turn those thirty's in the mud.

@chaseholmvik5666 Год назад

I have a older sportsman 500 and I want it to wheelie without having to put it up I have a after exhaust on it and that’s about it do you think a clutch kit would be able to get it to do it ?

@EPIperformance 10 лет назад

Most Yamaha's, Arctic Cat and Suzikis and Kymcos use a wet clutch system. You will have three clutches, the main two the belt runs through and then internal wet clutch. The little springs would go into your wet clutch. Also note that on many of our clutch kits we use a generic picture and parts may vary by model and year. IF you call us with your exact model we can tell you for sure what is in your kit. Thanks

@h23ijdonk 12 лет назад

I have a 06 wolverine 450 with Mudlite´s 25 " I want to improve engine response, then my question is, I can buy sport-utility kit for 27-28 tires?. Or is it better to buy for the stock tires?

@EPIperformance 12 лет назад

i would pull everything apart on the clutches and give them a good look over for parts that are woren like flat rollers and woren out buschings in the primary and tack dirty grease in the primary.

@stone3109 11 лет назад

2012 sportsman 550 27in mega mayhems snorkeled relocated rad.. what do I need suspension lift wise and clutch wise to make this thing perform??

@Jizzo17 11 лет назад

Alright thank you very much!

@TheErik249 11 лет назад

I've recently purchased a 2012 outlander EFI. It is new old stock. A leftover from last year. Never ridden. That being said, I purchased new tires. Same size as stock, more aggressive tread. Swamplites in 26x10x12's. Same measurements, twice as much tread. So far, she runs great. No slip. What should I be looking for, or listening for if I'm running into trouble? I've never owned a quad. I've been a dirtbike man for 40 years. Recent shoulder injuries have put me on four wheels instead of two.

@TheROCKSTAR51177 10 лет назад

Hey what's the differents between getting the kit or the one primary spring by epi? Thanks

@EPIperformance 11 лет назад

yes heat dose radiate into the tank. Location of the tank varies by model and year.

@southernrebel69420 11 лет назад

just curious i have a 99 polaris magnum 500 AWD and i was wondering what mods can i do to it so i dont have to worry about water getting into the cover i need to seal it up without using things like silicone maybe a rubber seal instead of the foam one also i dont want to do a snorkel on it as i dont usually get in that deep of water but sometimes it gets into the cover from the bottom side

@blackz06 7 лет назад

What would make a primary "snap" into disengagement with one spring, but not another spring. It moves effortlessly in and out when I have it taken apart, so nothing is sticking. The stronger spring is the one that does it. Weaker spring is smooth as butter

@MrCameronArredondo 9 лет назад

Hi, I am in the process of rebuilding the motor on a 2006 honda rancher 350 and need to know if this clutch kit will make me able to turn 28 inch outlaw 2s skinnys. And if so what part would I need off your website

@EPIperformance 9 лет назад

MrCameronArredondo On the Honda we only change the wet clutch springs. they are stiffer then the stock spring and raise your engagement 300-500 rpms which will help make up for the power loss of the bigger tires and will make it more responsive when you are on and off the gas. If you have the engine apart it is the perfect time to install the clutch kit. Part number for the kit is WE497010. Let us know if you have any other questions.

@hondarider1112008 12 лет назад

i was looking for a little help here...i have a ctv tech full primary from airdam but i was wondering how i tell what weights i have...it came pre set but i still notice slip now and them...just wondering if i can add more weights

@EPIperformance 11 лет назад

Some times you will see the rpm spike up higher than usual. Also if the belt is worn it will be a little jerky on the engagement. If It dose start to com apart you might hear a slapping noise on the cover.

@broughsy 11 лет назад

hey what clutch kit should i run in my brute force 650i? im running 28" mega mayhems and i ride trail and mud so im looking at something that will work good in both? thanks

@1208bronco 9 лет назад

Thanks guys

@randallvandette4703 11 лет назад

I got a 2008 suzuki kingquad 400(Manual/Gears). and I am wondering what I will need on my Quad if i put 27-28" Gorilla silverbacks. Everything on it is stock except my 27" Mudlites. Any help? Please and Thank you!

@EPIperformance 11 лет назад

I would take a look at my sport utility 27-28'' tire clutch kit and check out a 2'' lift for it.

@justinmcgregor5597 12 лет назад

i have a 97 sportsman 500 that is mainly work(like hauling trailers, plowing...etc)i like mud alot and my clutches are in need of some work so is my best recomindation for what i need. i want to be able to go through mud easy and spin and have enough touque to pull out trees!! it has k&n aircleaner two inch lift 25 in maxxis mud bugs and im jettting the carb! what would you suggest?? thanks

@EPIperformance 11 лет назад

there is a special puller to get the clutch off. It is a friction fit on the shaft some people have been able to get it off with out a puller from what they have told me. But I would suggest a puller to not wreak anything.

@EPIperformance 11 лет назад

We have never tested for fuel economy when we are looking for performance. The fuel tank varies in size from year to model.

@tayman1102 12 лет назад

with they improve my throttle response and acceleration?

@EPIperformance 11 лет назад

You can run with our Sport Utility Kit for 27-28" Tires. Top end should be the same as what you have now with better low end and mid range power, faster backshift and throttle response, and grip the belt better. You could also use our Mudder Kit which will give you even more low end power and torque but you will give up some top end. The best over all kit for 27-28" tires would be the Sport Utility kit.

@dragata1 12 лет назад

i have a 1993 honda fourtrax 300 2x4 i use it for crossing flooded creeks and it has some 27-12-12" Silverbacks yes sivlerbacks i have a jet kit new clutch springs proformance carb i got from some atv store it is snorkeled and it used to move my tires FINE like really great well i heard a loud grinding noise from the gear box and had it checked out by a atv guy and he said its all fine but the clutch is worn out and i just had it replaced what do you recommend? t doesnt really move much

@williamsantiago7303 7 лет назад

I own a 2015 570 Polaris sportsman and the tires are every bit of 27 inch. I've lost bottom end torque. Could you recommend a clutch kit for my machine please? I would like to get my bottom end power back. By the way, great video. Thumbs up.

@austinarey6353 11 лет назад

I recently bought 2005 Grizzly 660 that is on 29.5 Outlaws with no lift kit i was wondering what all do i need to change on it to keep my power and if I need to upgrade any other parts

@ranchermudlite1286 11 лет назад

I have a honda 420 2008 SRA and that does not have a belt right? so if i got the Competition Stall Clutch Kits for Honda, where would it go on and how would i install it?

@EPIperformance 12 лет назад

@theprideofarkansas How big of tires do you have on there?

@bballplaya123678 14 лет назад

For a grizzly 350 4x4 irs would u reccomend the economy or sport utility, and also with 25" mud lite xtr's which weigh 22.7lb front and 27.5 pounds rear would the clutch kit make up the different of 5 pounds more per tire? please respond

@SethKnows 11 лет назад

If I put 28" tires on my 660 grizzly, with the 28" clutch kit, would my belt slip if I go trail riding?

@EPIperformance 12 лет назад

You can purchase a kit online from us or at your local dealer. Yes the kit will improve your excelleration. Your top speed will stay about the same may be affected 1-3 (MPH).

@broughsy 11 лет назад

What clutch kit would you suggest for my brute force 650i? I have a hmf, 27" silverback tires, and ss rims and dynojet kit. I ride trails and mud and I don't want to lose alot of top end

@2trx400ex2 14 лет назад

I have a 04 honda rancher 400 with 26in itp mudlites and it cant even spin the tires in the mud really and it struggles up hills and i just got it and i need help any suggestions??

@stephen65la 10 лет назад

I need an clutch kit for my Honda 03 Rincon 650. what do you recommend ?

@EPIperformance 14 лет назад

@2trx400ex2 The economy clutch kit is the best all around for most people part #WE497030. The competition stall kit (WE497212) will have even a higher engagement for more low end power.

@EPIperformance 14 лет назад

@2trx400ex2 Our competition stall clutch kit is designed for ATV pulls, drag racing, or large mud tire racing. We wouldn't really recommend it for general trail riding, our sport utility kit is designed for all around trail riding.

@EPIperformance 12 лет назад

If you are looking for all out performance i would go with the competioin stall kit should stall it out about 8-1000 rpm more than what it dose nowwill really help you off the bottom end.

@mharrelson74 11 лет назад

i have a 2000 600 grizzly looking for a clutch kit to turn 29.5 or 30'' tires... what should i run and do you have a installation video

@TheCummins58 12 лет назад

I have a 2006 yamaha kodiak 450 4x4 irs.. and i went riding and got stuck in a pond and when my buddy pulled me out, it made a short little wine and then it ran high rpm and barely moved. i got it up to maybe 10 mph after getting out. and i was only in the pond for maybe 4, 5 minutes. im wondering if its the clutch if so wat do i need to do??

@EPIperformance 11 лет назад

I would check the adjustment on the clutch basket then I would check the centrifugal clutch.

@2trx400ex2 14 лет назад

Can u still use the competition clutch kit on long rides and trails.

@TheFordRebel 12 лет назад

Have an 08 big bear 400 5 speed and I put 30" silverbacks on it and it snt pull them in mud in 4x4 I noticed yall don't have a mudder kit for the big bear 400 even though it is on the mudder picture. But anyways how well would the competition stall kit do on it?

@ganert8616 Год назад

@EPIperformance, hi i want EPI clutch kit for my yamaha grizzly 700 i have 25 tires, but i want clutch kit for 27/28 clutch kit or sport clutch kit what is difference i want the most power from machine

@EPIperformance 11 лет назад

I would suggest our mudder kit for those tires to help out your bottom end.

@2trx400ex2 14 лет назад

E again if im in trails and long rides and mud riding what do you suggest? (2004 honda rancher 400at GPScape) thanks

@Jizzo17 11 лет назад

I have an 04 700 sportsman with 29" outlaws and I'm going to jet it and put an aftermarket exhaust on.. Which clutch kit do you recommend?

@tunerworld 3 года назад

Awesome video! May I suggest a microphone to get rid of the echo?! I have a Polaris Sportsman 700 and am looking into one of your clutch kits. Someone recently replaced the clutch with a factory type, however there is a delay before engagement. Which kit would you suggest?

@EPIperformance 3 года назад

I would call our tech line at 218-829-6036. It will depend on tire size, elevation and type of riding your doing. That way we can get the the correct kit for your individual type of rinding.

@MartialArtsTutorialsFighttips 7 лет назад

hello. any way to change the rear drum for disk brakes?

@Bryanbobber 5 лет назад

Yes, the clutch will definitely help with the rear braking.

@mo-reesespieces9066 10 лет назад

I have a 2008 King Quad 750axi. I am not sure what size the original tires were. I use 27 in tires and do feel like it just needs something. At what point would putting lower gears in vs a clutch kit make a difference? I use it strictly for Elk Hunting in the Rockies with steep hills and carrying heavy loads up and down the steep hills. Should I get something else with a clutch kit or would just the clutch kit do what I am looking for? (I think of lower gears when I think of climbing hills in my Jeep) Peace, Mo

@EPIperformance 10 лет назад

In most cases the clutch kit will help you out a lot and its hard to find lower gears for a lot of the machines other then some of the Polaris. When they use lower gears on wheelers they change the gears in the transmission, not in the front and rear differentials like you do on trucks. The Sport Utility kit for the 27-28" tires will give you better low end and midrange power, faster backshift and throttle response and will grip the belt better then stock.

@EPIperformance 11 лет назад

The 500 should have a reverse over ride button on the handle bars that should correct that and will allow the motor to turn more RPM. With that large of a tire i would suggest a Clutch kit for your machine depending on what kind of riding you will be doing.

@BROutdoorz 6 лет назад

I just had an epi clutch kit installed on my 2013 kingquad 500... is there a "break in" period? Or can I giver from the get go. ( the only difference I found so far is , it takes more RPM before it starts to move, is that normal?)

@EPIperformance 6 лет назад

There is no break in period for the clutch kit its self, but if you installed a new belt you will want to break in the belt for 20-25 miles. Yes that higher engagement is normal on that machine. Should be nice and smooth just higher. If it seems higher and seems like it is slipping you might have a roller out of place.

@stevensavoie7429 11 лет назад

I have a 2012 grizzly 550 with 29.5 terms and an hmf swamp series. I ride through the Louisiana and Mississippi mud. I go mud riding like every 2 weekends. So not that much. Do you suggest I get anything else

@TrueCustoms86 10 лет назад

I'm sure everyone is asking questions. I have one, I have a 1999 Honda Forman 450ES, TRX450ES. I am looking at 27" Kenda Executioner tires. I am running stock everything besides getting a 2" lift spring. I want to know if I should change the clutch now or wait? Would I need a Competition stall clutch kit for my primary, as well as a heavy duty clutch kit? I will be mudding a lot and pulling people out of mud as need be. I will also be just riding this normally outside of mud pits. Any idea how much your clutch kit would be? How is your kit compared to say EBC? Thank you!!!!

@EPIperformance 10 лет назад

Honda uses a different clutch then the other brands so our clutch kit is a little different. The economy kit raises the engagement 300-500 higher then stock and the competition stall kit raises the engagement 700-1000 rpms over stock. Both of these kits only change the wet clutch springs. If you go to the performance upgrade you will also get new friction plates for the other clutch on the machine. Any of the kits will give you added performance over the stock clutching and be a big help when riding with the larger tires. You get better low end and midrange power and faster response out of the clutch. Hope that helps, let us know if you have any other questions.

@teylerjohnson6942 11 лет назад

ok I got a 500 sportsman im putting 27 mudzillas on what would be the bes clutch kit to install so I don't lose so much power and don't burn belts?

@retrodan92 11 лет назад

What's the difference in your Utility clutch kit and the Competition stall clutch kit? Interested for my 98 Grizzly 600

@1rhinomight 11 лет назад

i have a 2009 rhino 700 with two brothers duel exhaust , k&N filter , MSD fuel controller , dynatek CDI and a machined sheave and im running 27 " interco reptile tires was wondering if your kits would help me out at all in the mud but keep my top end !! thxs :)

@EPIperformance 12 лет назад

We do not do a wet clutch delete. We take the stock components and dial them in a bit more for your particular rideing.

@Mattchew182 8 лет назад

I just added 27" mudlites to my 800 sportsman. Was thinking of adding your sport utility clutch kit. I do a lot of trail riding and am looking for more low end and mid range torque. Do these kits take a lot of labor time to put on?

@EPIperformance 8 лет назад

Should take a shop a little over an hour to install. If you are installing for the first time might take 2-3 hours. Take a little extra time and clean the clutch good.

@xXcanamXmanXx 12 лет назад

were can i buy a kit? will it improve on acceleration an top speed at the same time?

@EPIperformance 12 лет назад

It will help you out the most. It will stall the bike about 8-1000rpm higher than where it is now.So it will help you the most off the line.

@thijsvanbree5730 7 лет назад

Wich clutch (kit) do I need; I have a Outlander with 30'' tires and a 6'' liftkit. I mostley ride on the main roads and sandpathes. I hope you guys can give me advice. T.

@EPIperformance 7 лет назад

in most cases with 30" tires we would have you use the Mudder clutch kit which is designed for 28" and larger tires. If you are doing a lot of high speed road riding and using the top end then we would have you use the Sport Utility kit for 27-28" tires. Both kits are the same price and same amount of parts, they are just tuned a little different.

@EPIperformance 12 лет назад

@tayman1102 Yes that is exactly what our kits are designed to do.

@tylormack 12 лет назад

Do you guys do wet clutch delete like ///airdam?

@andrewconda6156 2 года назад

How's it going I'm pretty sure I'm going to buy a epi clutch kit Friday I didn't really upsize my wheels there 25 but they are quite aggressive and I got new full exhaust and new KandN air filter I had to replace my belt other day what would yall recommend for a new clutch I do alot of mountain riding and go fast and up hills alot big hills

@EPIperformance 2 года назад

We would need a little more information such as year and model machine you have to get you the correct part numbers. The best thing is to call or email EPI directly. 218-829-6036 or www.epiperformance.com Then we can talk through what you have and how to get you the best performance. Thanks

@EPIperformance 13 лет назад

@titans514jake Yes it will give you more power on the bottom end. Top end speed will stay the same but you will have more bottom end power to get up to it faster. And it will be more responsive when you are on and off the gas. The competition stall kit will give you the most performance and will be 700-1000 higher then stock, the economy kit will give you 300-500 higher then stock. Both are a noticeable improvement. For more tech help, you can also call us at 218-829-6036 M-F 8am-5pm CST.

@mattidontknow5068 8 лет назад

+EPIperformance Hi, about a month ago I picked up a bone-stock 2012 Can Am Outlander 650 XT. I really want to put 28 inch tires (strongly considering silverbacks) on it but im not sure if I would need a clutch kit or not. Could i get away with 29's?

@EPIperformance 8 лет назад

+Matt IDontKnow You can go with either size tire. The larger and heavier the tire the hard it is on your machine and will rob more performance. We offer clutch kits for the different sizes to help bring the power back and to give you better all around performance. If you are worried about top end speed I would go with the lighter and smaller tires. The heavier the tire the less top speed you will have. Hope that helps.

@1208bronco 9 лет назад

I have a 2014 polaris sportsman 400 H.O. and what to put 27in Mud Bug's on. I have stock 25in tires. What type of clutch kit do I need ? Thank's for any and all answers.

@EPIperformance 9 лет назад

The best we would have for your machine is the Sport Utility Kit for 27-28" tires part number WE434002. It will help make up for the power loss of the larger tires by giving you better low end and midrange power, faster backshift and throttle response and will grip the belt better then stock. That kit number will fit the 2001-2005 and the 2011-2014 models.

@abelmoreno5020 2 года назад

I have a 2006 Polaris sportsman 800. I have 30in tires on 14in rims. They are the outlaws 2. What kind of a clutch kit do y’all recommend? I know they’re definitely heavy

@EPIperformance 2 года назад

You would want to use the Mudder kit for those tires. It will give you more low end and midrange power to make up for the power loss of the heavier tires. Also with get fast backshift and throttle response and grip the belt better then stock. Part number for the Mudder kit is WE423800

@betsypwnsyou 5 лет назад

Is this the same procedure and clutch puller for a 2017 hightlifter xp. If so can I get the part # for it?

@EPIperformance 5 лет назад

If you have a 850/1000 Sportsman XP the procedure is different to get to the clutches. We have a video on website and youtube specific for the 850/1000 Sportsmans and Scrambler. That video is really close to the highlifter. As of right now we only have a kit for the 2016. We are trying to test a 2017-2018 as soon as we get our hands on one.

@Mohammed_AlHelo 9 лет назад

I got a 2002 yamaha grizzly 660 stock . What you suggest me to install on it so I can get more power ?? I only use it for street or desert

@EPIperformance 9 лет назад

mohammed khalid Hello, we would have a clutch kit that would help yo out but would need to know more information on what tire sizes you are using on the street and in the desert.

@Mohammed_AlHelo 8 лет назад

+EPIperformance the stock tires

@EPIperformance 12 лет назад

@theprideofarkansas I only have a economy any tire kit for your machine but anything will help you out with that size of tire on that machine. AW433600 is the kit number.

@noevenegas1099 6 лет назад

Just purchased a 14 can am maverick max 1000r and it came with 40in tires (22msa wheels) it’s already lifted (8” s3 lift) and has stock clutch and gear , it burned up 2 belts within a week of ownership , what do you recommend I get done ? Since I was looking to purchase the EPI mudder clutch kit you guys offer.

@EPIperformance 6 лет назад

Our Mudder kit will make the clutches the best they can be using the stock clutches. Then the next step would be a gear reduction either through portals or the transmission.

@gsfbffxpdhhdf7043 5 лет назад

40 inch tires lol hahahaha u idiot u will burn every belt u put in it unless u are driving in a parkinglot or on a dirt road at the most. Idiot even xmr 1000 cant turn 40s

@EPIperformance 13 лет назад

@jarsecod Check out our "favorites" video section. There is one called "EPI mud nats" that you might enjoy!

@davidcredicott4025 4 года назад

2019 sportsman 850 sp just installed 29.5 outlaw 2 tires what clutch kit will I be looking at for my bike

@EPIperformance 4 года назад

You would want to use the Mudder kit part number WE437484. It will give you a lot more low end and midrange power to make up for the heavier tires, faster backshift and throttle response and will grip the belt better then stock. We have a video on the older 850 Sportsman/Scrambler on our website to help you out also.

@Snurre86 9 лет назад

In the "Warranty Information" it says "PRODUCT MUST BE RECEIVED WITHIN 15 DAYS OF DATE RETURN AUTHORIZATION IS ISSUED." This is close to or under the estimated postal service from Norway, so I hope it is from "DATE RETURN AUTHORIZATION IS ISSUED" to the start of the postal service?

@EPIperformance 9 лет назад

You should be fine, they will normally notice where it is from and we understand the longer ship times. Also when you call in for a return number, just remind them of where it is being shipped from and they can put that in the notes under the return number.

@bradyriggs528 5 лет назад

hey i have a 2005 honda rancher 350 with 27” mega mayhem’s. as soon i put the tires on i noticed a lot of lag in the motor. i need a clutch it that would make up for the lost power and be able to turn in thick mud. please get back to me asap. thanks

@EPIperformance 5 лет назад

We have two kits for your machine. Most people use the Economy Kit part number WE497010 which will give you more bottom end and mid range power to help turn the bigger tires. The clutch engagement is 300-500 over stock. If you want the all out most bottom end power and response then you would want to go the competition Stall Kit part number WE497211 which is 700-1000 higher then stock. Both kits really help out to get the tires moving and spinning and keep them moving with more power. You also notice a big difference in reverse when you are trying to back up in mud. Hope that helps, let us know if you have any other questions.