Check out this 1957 BE35H found covered in a hanger for the last 34 years. Last annual in 1988. Check out this first video by Asylum Air! Audio clips from bensound.com
Wow, one damn nice piece of Wichita, got to fly my friends V35 when it only had like 30 hours on it, when a GA 3 axis AP was new, after flying 70s 152s. that plexi was so clear, felt like sitting on a cloud.
That's a beautiful aircraft. Given how long it has been sitting, I expected a mess. But instead it looks like a well maintained classic car. The interior looks fantastic. Some of those V-tails included control surfaces that were made with magnesium instead of aluminum and they are notorious for oxidization.
Magnesium-alloy oxidation is usually very easy to spot. Aluminium oxidation, however, is a killer and is notoriously difficult to see. Instead of forming an even coating of aluminium-oxide, the 'rust' goes into the metal and snakes around creating oxide tunnels and making the material friable. Once aluminium has that 'cancer' it cannot be repaired. This is the reason most aluminium objects are coated with plastic - it oxidises far too easily. Aluminium used for food and drinks cans is coated in plastic to stop aluminium leeching into the food product; aluminium is very bad for the brain, causing Alzheimer's like damage! This does not mean I am telling you to get rid of any aluminium pots and pans you have around the house, but maybe replace them over time. As for aircraft, after checking any aluminium is solid it is wise to coat it everywhere - simple lacquer spray out of sight and primed and painted outside; check the coating for damage regularly and touch up and flaking immediately.
@@bertram-raven I am certainly not an expert on metals. That said, I've seen more than a few of those ruddervators that are not repairable due to magnesium oxidation. You are right that is easy to spot. That specific Bonanza looks so damn good from the video I'd be surprised it would have that issue.
The ruddervators on on the V tails are magnesium and as I understand it have to be, and can not be skinned in aluminum. Those on 33D are in near perfect condition.
@@wolfgagger I hate to be the bearer of bad news, but all V-tails are Magnesium, and as today can only be re-skinned in Magnesium. As per the maintenance manuals, only The model 33s, 36s,Barons and straight tails can be converted to aluminum.
I personally never could be a pilot with my eyesight but if I could my three, by far, favorite airplanes I wish I could own myself are the Beechcraft V-Tail, and the Cessna 150 and 172 models. This Bonanza in this video is painted beautifully!
@@mattmeade8856 have one in the works currently, but I’m slammed with finishing up school currently and not able to work on it. It will be worth the wait👍
it is great to see that someone took the time and care to cover her with cloths/tarps & "vermin" wheel pants to save headaches later. Can't wait to see you get the airworthiness cert renewed and her back in the air! Great video!
Of all the small airplanes I have flown the V-tail Bonanza remains my favorite. The one I flew was owned by the Army flying club at APG, Maryland. I made 4 engine out emergency landings (1 approach & 3 departures) in one weekend without scratching it. The 10 cent spring on the alternate air source inside the cowling was corroded and allowed a flap to gradually inhibit the airflow to the carburetor every time I used full power. Once back on the ground the engine appeared to work fine. An A&P mechanic at the Roanoke, VA airport FINALLY figured it out. It was an exciting adventure🥳
It looks like it's in perfect condition!! I would love to own that bird. I own a 75 Beech Sierra and it's in amazing shape, also came from the midwest. If I needed a faster plane the Bonanza would be my first pick all day long! The exterior colors are just perfect, the interior could do with some updates but I'd be OK with that at the start! Just a perfectly preserved plane.
Great video! I just cannot comprehend “pickling” the aircraft for that long. Years of hangar rent or does this person own the hangar? Just the thought of bringing this ship into airworthiness ($$$) gives me the chills.
This aircraft, like many others left to gather dust in hangers, barns and on tarmac were meant to be in the air. Kudos to those who make an effort to get them back into the sky.
I would give this video 100 likes if that were possible. I love those old Bonanzas, and I hope you will put up more videos on what you do with this one. Thank you.
Beautiful find she’s near mint. Other than adding a sure fire magneto and a JPI Engine monitor I wouldn’t touch nothing as long as everything works she’s like an old sexy classic car like a big girl fly👍
Great to see this because last week there were two people working on a V-35 that’s been out of annual for 35 years and I’m looking forward to seeing you as well to getting this one in airworthy condition
Not bad looking. I have an H35. FYI, a cheap solution for the strut seal is to put some AT205 transmission sealer in with the fluid and then pump it. You can get the Granville Seal, but mine have held for 2 years doing this.
A fine preserved '57 Bonanza S/N 5085. It sounds and looks like it would be worth getting air-worthy again. My Bonanza was a 1948 S/N 1325. I enjoyed it for twenty years, and found the Piper Comanche is quite similar in flight handling! Beech made a fine aircraft, when they made the Bonanza! Bob U.
holy crap... for being in a hanger for that long i'm surprised at how "clean" it is considering.... why can't @jimmys world find these lmao. dunno how bad it smelled in there but couldn't have been that bad with the doors shut. the mold is in there though... but that's an awesome find... now to get the ADs done and a decent overhaul and annual.
What a nice find. You already know all the good things about the H model. It will be interesting to know how much work it will take to get her airworthy again. Sad to see one neglected like this but at least it was protected from rodent and weather damage.
Very nice old Bo. Looking forward to your next vid. I'm curious: how do you air up the struts? How much pressure is required? And did you spray something like MMO into the spark plugs? Are you expecting to find a good bit of corrosion in the engine after all those years? btw, that jack is just amazing!
What a beautiful airplane. It reminds me of the people I knew while I was growing up. Many vets from the greatest generation flew Spitfires, Mustangs, including the deadly P-51D, and a rare few the Mosquito both fighter & bomber. Even the training aircraft were beautiful machines. The Harvard was an American beauty. Imagine trying to get flying out of your blood? Impossible for some. Imagine finding an airplane you could afford to gas up, an airplane to take your family places.
Brings back memories. I was partners in 559D. We had no landing light on the nosewheel. Just in both wings. Also had panel update above the piano keys. We ended up installing a 4 fuel gauge panel so we didn't have to use a switch to see fuel levels. It looks like that one has been converted to FI. O-470G-CI. There are probably many AD's that need to be complied with.
@Galileo7of9 I knew that. But that is an H35 like ours. With almost same N number/serial number. Does it have the 40 gal wing tanks and no Aux? I think you have to change the wing LE to get the 40 gal tanks.
Def has M tips. But with lights in the leading edge and fuel caps for the Aux's the wing looks stock. Maybe the nose gear landing light was an option or add-on.
Ohhh, that all looks so familiar! I used to own a share of a ‘54 E-35, and that panel is very similar (except for the green)! The WWII surplus Sperry attitude and directional gyros! The lead owner of our group and I finally paid to have those replaced after the attitude gyro tumbled on him on an IFR flight out of Cleveland. The great mechanic we found so badly wanted us to move up to the IO-470 instead of our E-225-8, but it wasn’t in the cards with one owner losing his job (“Reagan will never dare to fire us air traffic controllers!”) and another refusing to pay his share, so we remaining two guys had to sell. I wonder if the D model in a hanger in my hometown in Iowa is still there rotting away…. Didn’t have those mouse guards on that one so the interior is probably shredded…
I have a list of like a hundred items that I need to inspect thoroughly or switch out on a unit like this first thing comes to my mind what's the camshaft look like. Nice old bird.
I was for sure "That thing ain't starting at that turnover speed" then it popped a little then a little more but even then I was sure it wasn't going to start as it just didn't turnover faster enough and even struggled to do a full rotation, but then its soul that slumbered for 34 years awoke and it wanted to live, BRUMMMMM I'M ALIVE!!!!!!!!
Nice work to getting it to where you got it. I don't know what you're using for audio but you have to mitigate the wind noise. Try using a cotton ball over the microphone.
Come on, I've been setting that along. You're gonna tell me it fires right up. And then no smoke, either? Come on, Pull on my other leg this one hertz l o l
