WILL WHEEL SPACERS FIX MY FORD?! 

He’s low key a perfectionist... and there’s nothing wrong with that to be honest with you...Get job bro.

its not leaking oil its sweating horsepower

I love the route you went with your 7-three. Looks perfect man!

Spacers made the perfect look. It doesnt looked tucked anymore and there is not too much offset. Perfect in my opinion

Spacing bumper out was perfect idea. That's what I did to my 97 f250 but I had 22x12 on 35s with -44 offset

Love the look of that OBS, even with spacers.

I really like the 7.3 it’s a badass truck love the lift I’d definitely make it a 4WD one day

Keep the obs videos coming.. she looks beauts!

Really like those tires. Might need to get some for my truck

Also had the same issue with one side clearing and the other not lol I trimmed just a tiny bit out almost like you did because when it flexed it would still want to rub but I trimmed it where you couldn't see from outside. It was just the inside lip on bumper.

That looks so good! I need them now on mine. What if you did less that 2” spacers?

Gotta Appreciate The Dedication...!!!!👊👍

Looks way better with the spacers

Why not hub centric spacers on the front

Buddy you need to get center hub spacer , 4wheel parts carrie good ones

Nice video. Why don’t you just have steel bumpers made for it?

tune the obs to see if you can get better fuel mileage

Oh my god the spacers just completed the truck! 😍😍 now it’s time for led head and tail lights

I have the same problem. noticed it's damaging the meat on my wildpeak 33s.

Calm down people those are shifted industries spacers ... good as bora . 🤘🏽

OBS trucks already have enough of a width difference from front to back so if you left the rear adapters off it’d be much more noticeable. I can’t stand it on mine! Lmao

What wheel spacers did you go with...Thanks

You better come bash the OBS off road with me when I come pick up my square. I'll be down there end of this month >:)

Must have missed it but what width are the spacers?

I WANT FLOG BUMPERS ON THAT OBS WOULD BE SICKKKKK!!!!

Why no tuner and exhaust?

instead of spacers, can you run a deeper wheel or offset??

Where’d you get the spacers brotha??

Where can I get that kind of lift for my F-350 1997 two-wheel drive

Can you send me the link to where you got those rims

Chris always has his truck at your house lol

Why didn't you get hub Centric spacers?

What size are the wheels and tires...I have an 88 ford f350 obs....

Why didn't you get hubcentric spacers they center perfect, what you have is depending the studs to Make sure in centered no bueno

where you get them spacers?

What kind of tires?

I have a 94 f350 with 37/13.50r22’s and didnt have to cut the bumper or run spacers..

The OBS looks much better with the spacers on

Doesn't those 2in spacers eat your hub bearings on the front my hub bearings only last four to five months with 2in spacers on my 6L

Back the obs in so it still leaks there but not hangs out in the road

I've been looking for spacers for my OBS for a while could you ask Zack what brand you guys put on yours cuz I don't want to buy junk ones?

Need to get running boards off and the trim lol 1 side clean

Tell me where to find a perfect OBS like that but a 4x4 😂😂

I had all my seals replaced on my truck and she doesnt leak anymore thats all you need bud

Yoooo Ryan liked my comment

There’s some type of spray that gets rid of the oil spill on the driveway. Not sure what it’s called exactly but it exists

Just regear the obs to a ratio thatll make it back to stock final drive and regain fuel milage, its probably 4.10 is what you need

Oil leaks seem more important than a lift on a work truck, it makes the money.

Definitely should have got hub centric spacers

So what about hittin bumps ? You sure you don’t wanna take a 2-3off or so

Wait when did you put the steps back on?

Is it cause it’s the wrong offset in wheels wouldn’t it be cheaper for you if you returned them ?

Hi.. can you tell me please what kind suspension you put or what lift kit? Thanks

What wheel spacers did you go with?

Love that look just a little tire outside but damn I dont like spacers eaither some times they are needed, to the heck with those yelling about lock tight he used blue so they will come back off and you dont have to keep checking them so go lock tight

You should get new rims

9:13 lock washer 👍

Imma cry😂

can I put a work for it sticker on an f150? I wont get crucified right?

How wide were the spacers?

😭😭😭I have all these problems 😭😭

Axle swap and lift it a bit more bro.

Mopar or no car

9:12 is the way to start a tea bag ... moral of the story there’s gotta be a better to space a bumper 😂👱🏿‍♂️

What happened to Aaron

You didn’t show Eddie and his viper lol

Why does Chris park his truck at your house and not at his?

Why didnt you go to daytona

👍👍👍👍👍👍

Plz get new mirrors

Beard 👍🏻

Needs a new exhaust(5inch!!!)

Sooo... Is that really Chris's truck?

As a welder I know the pain

Second one

You should have gotten hub centric spacers bud your asking for trouble.

28th! 😂😂

wait a minute Gorden and dale jr already retired, this joke is so 2 years ago.... jk well Bad news for you is you are now going to finish off destroying the paint down the side of the truck! had 2 run wheel spacers on my tacoma probably about that wide and my 33s threw so many rocks forward I might as well of paint stripped it myself... It looked good for a bit as does yours!

Should of left it stock. Better mpg, more power, easier to load for work, no turning issue, factory wheels looked great

There’s no clearance Clarance

Why isn't your video monetized?

So sketchy now doing hubcentric spacers

What the difference in letting it hang out half way and parking it in the street? 😂

First

First like, comment,view.

Do you even lift bro...? Oil lift that is... check it out you need to diluted the solution for that type of oil lift then throw down some "flubber dust" it ain't cheap $20 for a small amount but reusable and worth every cent!

And that guy makes no sense you’re in a dead end neighborhood?

5th...

2wd? WTF

Your tires are too big for the little girl lift..

1st

Dude, not trying to be a hater but spacers suck. I actually saw a Jeep yesterday that a spacer came off and was sitting hub on pavement

#loctite

Not gonna fix it cuz its still a ford

No you are not rednek

Why pick on dodge I see more chevys and fords in the shop or side of the road then dodges

Nothing can fix a Ford

@dmaxryno Zach's comment at minute marker 3:15 is inappropriate and racially offensive. As much time, effort, and energy you've put into your "work for it" business, I'm sure that's not the type of message or public image you intend to project. Zach could have chosen to articulate his words more carefully to convey his opinion of buying quality manufactured goods.

First