Why Wheel Spacers Can be Dangerous. What to look out for and how to use them properly. 

This is definitely a video to be shared. Lots of forums with guys on the fence about spacers and others fear-mongering due to lack of knowledge. In the few I've checked out on this subject, not one member against installation ever cited incorrect torque settings as a possible cause of failure. Very informative...

Been running Digicam wide spacers for the last ten years on my 350z. No problems at all, but I would recommend bolt spacers.

look ima be honest. spacers are not really my thing but this video has me interested

I just bought these 25mm spacers for my e90 bmw and I got this clicking noise when moving at all is it because my lug screw is to long

one of the best vids about spacers i have seen. great information

NICE video!! Now at the end of the video around 08:25 you say you will do a video on hub centric lips is this video come out soon? I like you your content, cheers!

🙌🏽🙌🏽.. nice info bro

Hernandez Matthew Thomas George Davis Donna

Video was well done !!!

2:56 🤭🤭🤭

Great video! I fitted Eibach wheel spacers to my mk7 ST fiesta, lost the sharpness and turn in speed, took them off as I felt I lost the cars dynamic if you know what I mean 😏

Great video, Extremely informative as usual. DRIVE SAFE!!!

Barbados!!!!!!!!!!!!!

Ty

My spacer is hubcentric but wheel has bigger hub size I torqued with using lug centric lugs and star pattern should I be fine?

I just put spacer's on my Mustang Gt and it's only been a few days.. The car feels more cat like.. But I have a feeling the driver side front spacer is torqued a little more than it calls for.. I am going to pull the wheel off this week and re do it... The fronts were a little more difficult to do because they spin around on you.. I put a pry bar in-between lug bolts n I used an impact along with a torque wrench.. They called for 150 foot pounds and I may have been over by 5 foot pounds, IDK I am going to take it out for a little ride today.. I already took her out on a long 1 hour ride on back roads that are bumpy and you have to make turns and also a lot of stop and go. Then I took her out on highway to check for any NVH, and everything felt smooth took the car up to 70 n 80 for a minute and so far so good.. I hated the way the stock wheels looked sunk in like that!!! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7Z9uTgZeKwU.html

Excellent delivery! I’ve been contemplating purchasing spacers for my 2019 Accord 2.0. What size would you recommend to show a good stand out from stock but will avoid the most complications?

Do they have any benefits at all for a road vehicle? Do they affect your insurance premiums? Can they invalidate your policy if you have a claim and haven't informed the Insurance company?

GREAT VIDEO! Go BORA OFF-ROAD spacers if you want a lifetime warranty!!!!

Just got a cnc machine and wanted to make my own spacers so I’m watching videos on here. Was wondering why your accent sounded familiar. Shout out to my 🇧🇧 family💪🏽

Im going to install 2" spacer on my camaro 2013 car, because I want it to look cool. Good or bad idea?

I Always use H&R spacers….needed a set for my Brabus alloys….ET45 😂 way to close to suspension parts

it's been a year, where's the follow up on hubcentric rings?

but every time i change tires i have to tight it again on the right torque? or just the torque betwen the spacer and the car have to be right? sry if it wasnt cleary but i think is undertandable

I got hubcentric spacers on the hub side only, the side that goes to the rim is actually lugcentric, because the rims i have use the same bolt patern, but have a slightly smaller hub, so they don't fit without the spacers.

did you ever make the video about the hubcentric spacers? cannot see it in your archive

i have a set of 2017 18" silverado wheels and tires that are in great shape.. i want to put them on a 2019 silverado, but they slightly rub the caliper.. could i use a 1/4" spacer to get the clearence, and safely run these wheels, so i dont have to spend 1500 on tires, and have a set of wheels i dont need laying around?? thanks for any advice

Nice as usual. Very informative.

Thank you for the info

What will happen if you use locktite?

What is a good torque for spacers

hey, where's the rest of the series? this is actually helpful

Is “Anodized surface, 6061-T6 Aluminum Billet, 10.9 grade lug nuts” safe? The lugs? 15mm

"cun" what?

Thank you 😊

Excellent

Great video... ok, does it differ being Anodized or raw non Anodized? Are anodized ones as strong as non anodized ones?

Is the hubcentric video out?

Soo i have a 1999 tahoe 4x4 but want too get spacers but with longer suds what would you recommend (oem studs are short but also want my truck wheels to stick out )

Do u have to have disk breaks to install spacers. My car has drums in the back

So dont use locktite?

😊

only use spacers to keep your oem offset limits

Are the slip ons known to make the tire shake / vibrate? how likely is that to happen?

Do I need an alignment after putting 2 inch spacers

Oh no! I’m one of the idiots that thought anti seize on lug nuts was a good idea.