Will You Have Stripes On Toothpaste If You Squeeze It Out REALLY FAST? 

Sorry for the delay and double upload. Premier didn't want to but any sounds on the first video :D But this was really one to film and I think we could do these science/myth busters type of videos. So if you have questions like this one please let us know and we will test them out :D

Run toothpaste over with car, from the back of tube to front of tube, so it's like squeezing tube normally but just really fast. Its easy to control exact speed in car too, so u can experiment with speed if u want.

In case you missed it: the weld below the "5" in 5 000 000 is broken.... We love the smashinator to much to see it destroying itself... And a new pallet please....

Maybe try wrapping the tube with duct tape to reinforce it?

Toothpaste in the Extruder !

I like how the smashinator turns every liquid into a fine mist that just seems to evaporate before it hits the ground. Where did all that ketchup go?

@ 8:53 Lauri is thinking like "What am i doing with my life? I am pounding toothpaste tubes with a f***ing hammer...." :D :D :D

It starts to hail. Everyone gets in, out of the peppering with little ice balls. The Fins get into their bikinis and go out. xD

i think that "sledge hammer science" could be a great recurring series.

Ahh the Ronnie Coleman pic on the wall. Light weight! haha Yeahhh Buddy

try forging with smashinator

You now have the whitest smashinator in Finland. No cavities either.

Sexiest hailstorm I've ever seen.

What if you apply pressure while putting the toothpaste tube into hydrostatic environment? If you could somehow grip the nozzle, then submerge the rest of the tube into something liquid, then apply a liberal amount of force to the liquid, you could probably achieve a ridiculous amount of muzzle velocity. ...then again, it _is_ easier to just duct tape the tube with some nifty tape.

Put the toothpaste into a container filled with water and a hole in the side that you connect to the toothpaste-tube-exit. This way the pressure of the impact will push the toothpaste on all sides and the only way out is the hole. "Just" make sure the container is strong enough.

open the backside of the toothpaste and connect it with tape to the outout of your compressor.... maybe the air can squeeze the toothpaste better...

Worlds fastest bearing removal/install with smashinator.

And for today’s extra content, we have this human. It is extremely dangerous because it exercises tremendous power over its environment without sustaining it, so we must deal with it. -The biosphere

This is the last video I'm watching tonight. I forgot something though... What was it? Oh, yeah. I have to brush my teeth.

I have hydraulic press at work but they don't let me play with it 😥😥

Am I the only one who likes their videos before watching them?

Smashinator vs red hot steel 👍

I love the smashinator 5 million :)

*THAT EXTRA CONTENT THO!* 😮😍

Ronnie coleman on beyond the press channel. Life is complete.

A question I never thought of , but the smashinator looks epic in the sun with it's colours

I wish I had a great camera like you do.. I'm unsubbing because I'm so jealous!!1one

I love how liquidy the toothpaste seems when hit really hard... I didn't expect it to look like colourful water in the slowmo.

Freeze the toothpaste in liquid nitrogen and let the smashinator go to work? Smashing things frozen this way is so cool. Chocolate smashes like glass!

That second to last test when you hit it with the small 🔨 hammer it didn't have any stripes,but it blew out of the back of the tube...HAHA!!. Annie had me laughing when the small bits of hail was doing wonders for her two piece 👙 bikini,she's CRAZY!!.HAHA!!.

8:47 Face of a man pondering his choices in life.

2 thumbs up for Anni in a bikini in a hail storm! 👍👍

What if you use tape to reenforce the toothpaste tube?

You could wrap duct tape around the tube for added strength

Science: the paste is made so that all the colors and components have the exact same density. That way, all the stripes come out evenly from start to end. Batches of toothpaste are tested for density right before mixing so that they don't mess up. They also pack it uniformly too, of course. This could be tested with the Extruder 5.000.000 if you could fill it with Perfectly arranged toothpaste. Or maybe make an Extruder 5.000 with the diameter of toothpaste tube, and load it by cutting both sides of the toothpaste and pushing the paste in the Extruder like a syringe.

for today's extra content: anni in bikini

7:13 crazy frog man with a sledge weapon

Can you crush different types of inflatable sports balls with the smashinator?

Nice video as always^^ But if you are still planning to squeeze something in future, try to wrap the object in duct tape. Don't think that the stuff will escape from the side, especially by using a hammer

giant hammer on steroids...lol 60 mph...wow!!! also wrap the tube with duct tape then smash with board and hammer

Anni looks better than "pretty good" in the bikini :-).

Felix ketchup best ketchup

Lauri aims for the bush! Glad we confirmed that :P, too bad Anni was in the way. All jokes aside, really fun video as always, I give 10/10 yeps!

7:13 Why there is ACAB on the wooden box behind Lauri?

why would it not...

10:45 Warm and soft finnish summer rain ;) P.S. Anni has 10 times more muscles than me 😉

Nice 😍

i liked the Ronnie quotes there mate

Ronnie Coleman!

Footinator 10W.

Fucking amazing! The paste really didn't wanna just shoot out the front! xD What a mess!!!! xD

I want to just cut the tube open and see how the different colors are stored in there. For example, if you kneaded the tube would the colors mix inside, or are they in separate compartments? ...I guess it would only cost me $2.50 to find out myself, lol

The missing sound really wasn't the hindrance others seemed to think it was. Was able to enjoy the Pepsi-dent MAX (yeah, I know, Pepso) without it.

Now smash mustard, mayonnaise, sauerkraut, anything else you would put on a sandwich/hamburger. Also smash a sandwich and hamburger.

what a scary machine the smashinator 5000000 is. lol liked it, you need to try some more cool stuff under this monster, maby bullet proof glass or carbon fiber or what every you see as an interesting thing to smash

150th like 44th comment...

The whole video was great ..... packed with ööööö.... with science... :) Todays extracontent Anni you were supercool

Anyone else think this was a collaboration with jerry rig everything ? Just scrolling and see that thumbnail

Salute to Finland...!! Every sock is different on Lauri's legs..good to see,this trouble is everywhere..

7:50 Ronnie Coleman fans?

Holy shit Anni looks super strong!

What about you modify the toothpaste tube on the sealed End, so you can attach the hose of the compressed air there and then let the Air go full Berserk into the Tube? @ Lauri

Smashinator five million has enough power...yup.

Try cutting the nozzle end off. Not just the nozzle but the whole round end off. Then Smashinator Five Million!

Hey, great Experiments you made. I wonder what would happen, if you smash a Block of gelantine, like it was used in the slingshot channel. Perhaps you will start with some Gummibärs. Thanks for making, and have a nice day :)

After that video kids will be well motivated to get Toothpaste tube exploded at any reason any time.

Love that Suomi Smashinator :-) Hey Anni, 2 weeks ago there was a hailstorm at the Cheyenne Mountain zoo in Colorado Springs Colorado. The hail stones were softball size, at least 4 inches in diameter plus a tiny bit more. All the cars in the parking lot were really badly smashed, so much so that the cops would not let their owners drive them off. The wreckers had a land office business there. Some of the zoo birds got killed as well. I am glad you only got pea sized hail :-) A month ago that area had baseball size hail. You'll wonder where the yellow went when you brush your teeth with Pepsodent. An old Pepsodent commercial song from the 50's, maybe it can be found on YT?

Hey! How bout toothpaste in the Extruder 5000000, placed under the Smashinator 5000000? My prediction is it will reach low earth orbit... And still be striped

I will never get tired of the smashinator.... Reduces anything to a cloud of particles...

7:49 I lol'd hard when I saw the Ronnie Coleman reference! Nothin but a peanut baby! Everybody wanna be a bodybuilda... I'm dyin!

Cool biceps, plot twist: *THEY* are the hydraulic press

I love the Chronos 1.4, you can't beat the price. I'll get one if they have a sale. It'll be great filming at the range to watch bolt carriers to see if they're working right. The camera could also have a place in the bedroom - bringing couples together, one frame at a time.

Lauri! How do you make your own Salmiakki Koskenkorva? PS. I don't have an hydraulic press.

Maybe no stripes or science 6:00 Damn pleasurable to watch, though!

There was some 3 inch hail that fell here a few weeks ago, My tomatoes and cucumbers did not do well...

Pepsodent is probably the cheapest toothpaste you can buy in USA. 0.99 USD for a tube. Toothpaste is pretty great in smashinator

I tink Lauri's right about the smashinator, it’s just going to make it explode

I've watched many of your videos, but I often shake my head and ask myself "why do I like watching this stuff" 🤣🤣

Try strengthening the tube with a few layers of duck tape when hitting it with the sledgehammer. Hopefully a larger volume comes out the nozzle.

There is no divider in the tube that prevents the colours from mixing. What prevents them from mixing is laminary flow. If the flow was fast enough or the toothpaste less viscuous the colours would mix and it would no longer be striped. My guess is that the tubes will just explode and you won't see anything interesting.

Might be dangerous- but what would happen if you Smashinated springs of varying strengths and sizes?

"As long as it comes out the nossel it will have stripes" well... if you put it in a steel tube with a small hole for the nozzel and push a piston in really fast from the backside... I don't know, it's your job to find out :D

should have taped the toothpaste tube with duct tape to keep it together!

I’d like to see you guys redo this but put some tape or whatever you can think of to reinforce the tape 🤔

Allow pressure a little more carefully?... Whack!...lol Nice!

Wrap the tube in duct tape! Wrap around the ends, and then around the middle. Make sure it is sealed with no holes. It is very important for us to know if stipes happen at high speed. I think better understanding this technology would help NASA make better rockets.

Not even reinforcing the toothpaste with all manner of strong tape would've stopped it from exploding in the Smashinator. Duct taping it for the plastic hammer might work so try that.

@ 5:51 random hose clamp takes first flight. I guess that wasn't doing anything important.

What if you surround the tube with water? Then the pressure could be applied to it evenly and the tube would not rupture. So if you build a metal enclosure with a hole for the nozzle, you could compress the water really hard with explosives or something and the toothpaste would fly out very fast!

The structure of the escaping toothpaste renminds me of what the Great Wall Simulation looked like. Could it be our entire universe started as a tube of toothpaste? o.0

do this again, but wrap those tubes to extra layers of something that would prevent them from breaking apart. Perhaps duct take would be good material.

How about reinforcing the Toothpaste tube with some tape, to survive at least the Hammer? No tape will stand a chance against the mighty smashinator^^

That is funny shit guys absolutely awesome!!

Actually at 6:00 there IS science.. You can see how the universe was formed by the big bang!

When you stamp on it, it looks like a chameleon tongue 😝 great video guys! ♥ From the UK 🇬🇧

It's scary seeing Lauri without the cap, please keep it on for the winter. Also it would be nice to see an extended cats video with the cats slow motion jumping and pouncing on things.

Stripey ketchup could be a thing,

Starving kids in Africa could've eaten that toothpaste.

This video underscores just how crazy Smashinator 5M is. No time for anything to get out of the way!

you should try wrapping it in ductape so it will be reinforced and forced out the hole