Window winder switches? - Ferrari engined Alfa 105 Alfarrari build part 205

Подписаться 190 тыс.

Просмотров 27 тыс.

50% 1

Jackery Australian Day Specials:
8% off plus a $100 JB HiFi Gift Card
Valid on SG1000 Pro and SG2000 Pro kits
Offer period: January 17th to 26th
Extra 5% off KOL special discount sitewide if you use my code: ADAYJEFF5
bit.ly/4aVmScJ
‪@JackeryAU2012‬ ‪@JackeryGlobal‬
#Jackery #SolarGenerator #JackerySG2000Plus #outdoor #offgrid #adventure
My favourite tools;
Knipex Pliers Wrench amzn.to/3RKtl1m
Power Probe amzn.to/3NYjV10
Grinding respirator mask amzn.to/37rBpwt
Weld through primer amzn.to/2wLTwyM
Bead roller amzn.to/2JzFlk5
The Shrinker Stretcher amzn.to/2Zr7QWe
3 in 1 Sheet metal press brake/guillotine/roller amzn.to/31Jbe08
Magnetic Plug Weld Tool amzn.to/319COZh
Become a Patron to watch the videos ad' free a day before everyone else
/ homebuiltbyjeff
Home Built Merch homebuiltbyjeff.storenvy.com/
Check out the Weldclass welders I use at www.weldclass.com.au/
Raceworks parts can be ordered here www.tiperformance.com.au/bran...
Find more Home Built by Jeff
/ homebuiltbyjeff
/ homebuiltbyjeff
Mailing Address;
Home Built by Jeff
PO Box 1520
Bowral, NSW 2576
AUSTRALIA
Music:
lukelukess.com

Авто/Мото

Опубликовано:

19 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 183

@HomeBuiltByJeff 4 месяца назад

@TigerRogers0660 4 месяца назад

Jeff, those window switches are one of the best things i've ever seen you make! Ingenious!

@jaynay2459 4 месяца назад

Great video Jeff. My only thought was to maybe cover the front door speakers in a tan coloured (or something similar to the leather colour) speaker mesh fabric or paint the speaker mesh covers to match the door trim. The modern speakers look a little out of place in the stunning vintage interior. (My opinion only - your car not mine!)

@chrisoo8998 4 месяца назад

Yes 💯

@mrcaps1971 4 месяца назад

Agreed. The speaker covers are not keeping to the vintage theme. VHT make an upholstery paint that would easily remedy this.

@Beri1984 4 месяца назад

Paint it chrome and you're done

@jaynay2459 4 месяца назад

@@Beri1984 not a bad shout tbh!

@brianshorey 4 месяца назад

Fun fact, diodes can pass voltage in both directions, some do it by design. When you exceed the BV (Breakdown Voltage) in the 'wrong' direction, energy will flow in that direction. Diodes with a BV of 14.5v are used in voltage regulators to regulate the output voltage of the alternator to 14.5 volts.

@johnymodem1326 4 месяца назад

Nice water analogy for the electrics. When I did my "Electronic Systems" A level at school (many decades ago) the teacher started the course by using a similar analogy. Love the series. Keep up the great work :)

@jonathanday2242 4 месяца назад

Brilliant job,love that you used the original window cranks rather than modern window switches, 😎👍

@TAD050486 4 месяца назад

Not everything works out for the best all the time even though you put in the maximum effort, so its that much bettter when it does. Excellent work on these window switches. Its a pleasure to see how well you integrated them as if original. The switch for the passenger side is so logical as well. If its worth doing it once, its worth doing three times.

@justingibbons5559 4 месяца назад

Seeing you happy makes me happy!

@gazzafloss 4 месяца назад

No doubt about it Jeff, you're a fair "doer". Great result for the power windows, once again persistence wins for a great "Home Built" result.

@baddaddy8718 4 месяца назад

Jeff, this car is an insane hot rod and the fact you’ve done absolutely everything in your shed is just brilliant. Get someone to do your dash lights? Pfffft, I’m just gonna put it out there that no chance you’d do all the miracle work to get someone to put globes in a cluster…

@groovyboovy 3 месяца назад

the tap and the drain, i am going to try to remember that, good one Jeff, thanks

@Tinker2006 4 месяца назад

Wow brilliant and very neat solution- the patience you have is going to become legendary

@ryansdrivingvids716 4 месяца назад

Awesome as always, Jeff! But hear me out: One touch driver’s side up and down.

@jeffharrison5265 4 месяца назад

Great self made solution to the window switch issue!!

@alastairwatson3201 4 месяца назад

More wizardry, Jeff! Great switches, beautifully made.

@stephencurry8552 4 месяца назад

To me your Alfararri is superior to any of the rich toffs who can write a check for a factory track car. As well, being a building myself, though I know very little about car electrics. Great to learn from your videos. Great work. Awesome car.

@spoetm 4 месяца назад

Excellent job Jeff 👍 amazing how we just take things for granted in a car w/o even thinking about how they work. A real HomeBuilt episode again, well done

@pcoppleman 4 месяца назад

Commony called a reverse polarity switch for the up / down to change the motors direction. Used in electric hoists, recliner chairs, drills, etc.

@andyfletcher7535 4 месяца назад

She's nearly there pal. Looking forward to you starting the pickup

@david100483 4 месяца назад

Keep the 105 content coming, I could watch this series forever! I wish I could see this car in person ✌️ 🍻

@craigwoodfolk3240 4 месяца назад

That was an outstanding job you did with the electric windows. I especially like that you were able to maintain the period correct window winding arms, while incorporating a modern and useful electric mechanism. Superb job. Many blessings to you and Mrs. Jeff.

@gerkokkes 4 месяца назад

Nice video Jeff!!! The problem with your turn signals is solved if you connect the positive wire from the left and right side to the indicator light (without ground wire).

@lestercranmer2631 4 месяца назад

Back in the early 80's i fitted a fibre optic system to my capri. No electrics involved, thin Cable pointing to each bulb then run up to the instrument cluster.

@Andrew-vx2ls 4 месяца назад

Nice work Jeff. I enjoy your presentations and efforts to keep on the track of a coherent design.

@mikl911 4 месяца назад

Nicely done, you can now add engineer to your resumé. Hair cut is looking good.

@art10s 4 месяца назад

Really enjoyed the white boarding on wiring the switches. Would be interested to hear more about how you go about using CAD too.

@stephenhennessy2420 4 месяца назад

Great tutorial on the windows switches Jeff. Thanks mate.

@jimgerock9190 4 месяца назад

3M Strip Caulk works fine for those plastic water sealing sheets.

@stuartstephens 4 месяца назад

I was going to recommend 3M strip caulk as well, I've used it for this exact purpose. I assume it's available in Australia at auto parts stores or you can order it online. It stays sticky but isn't a gooey mess, and is handy to have around for sealing around trim studs and other things. It never hardens, I have a box of it that's 15 or 20 years old and it's still good. Look for part number 05878.

@Greatadventure124 4 месяца назад

No start or drive today either..Keep going Jeff 🙃✌

@AlbertManiscalco 4 месяца назад

it was very vicariously satisfying to watch you solve that problem Jeff 🙂 please weigh her after shes complete im really curious to hear how much the final weight is (wet weight) and what the balance ended up at...also looking forward to seeing her tearing up a race track...!

@theservant752 4 месяца назад

The ground goes after the light bulb, you send 12v through the flasher unit and from there the pulsating 12v through the indicator switch where you select which side you want it to go to and then it grounds after the bulb. That is how it should be stock at least.. (like you drew the other schematics of the light bulb 15:15) (they dont always have hazard function stock though.)

@musclecarczarig4003 4 месяца назад

Now that was a cool video, I love your ingenuity Jeff!

@davidparry1982 4 месяца назад

Looks great Jeff - such a clever window solution

@rongeernaert1208 4 месяца назад

Nice sound coming out of the window motors !

@bertranddupuis7327 4 месяца назад

Sweeeeeet !!! Still don’t understand why you bothered with a radio…that engine sounds soooo good !!! Cheers !!!!!

@sandiawebdesign 4 месяца назад

New music!!!!! Thank you Jeff!!! Such a relief. Keep changing it up. Keep the sponsors rolling. Love it all for years now. Cheers

@ronintres6757 4 месяца назад

incredibly beautifully made, what a craftsmanship 🙂👍🏻

@guywilson187 4 месяца назад

Brilliant solution Jeff. Well done. ❤

@S2NAZ 4 месяца назад

I LOVE the electric window switch solution Jeff. Brilliant and Simple 🫵🏻👍🏻

@artbysteve215 4 месяца назад

Brilliant solution and very nice work, as usual. Great videos always!

@bobgcampbell 4 месяца назад

Great work with the window electricals. For a possible future improvement, consider an Arduino that has all switches connected, then all logic of what switch does what is a small matter of programming.

@geekay269 4 месяца назад

Watch out for water issues with the relays inside the door. If you can move the relays into the cabin, that will be a much better place for the relays, and less wiring into the door.

@ignus9928 4 месяца назад

Yay! Finally got a whiteboard to help explain things! Haha

@brandoncool63 4 месяца назад

Some other channels edit a filter for when you weld or use plasma cutter. It's kinda bright on eyes. Great work, as always.

@danielhughes9556 4 месяца назад

Another great video Jeff. I've been thinking of doing this too in my project car. A 69 DATSUN 510. You know, the one I always say you should build next! Thanks for the video. This will help Now you need a switch to kill it's utmost up, and utmost down. Basically so you can just push the switch, and not worry about holding it too long

@FanatikBuilds 4 месяца назад

That turned out perfect Jeff! 👏👌 Great stuff!

@HomeBuiltByJeff 4 месяца назад

Thanks mate :D

@stevewandel9317 4 месяца назад

I hope the window handles are strong and also the mounting. Most people, when seeing a window handle like that are going to assume its for a manual window and therefore put the matching force into the handle...

@1one3_Racing 4 месяца назад

Thays a great explanation of electeicity and it how I describe it to anyone who is intimidated by wiring. Water or hydraulic. Its just a series or circuits. Get your 2 hoses twisted and connect them to the wrong taps and it wont work! Juat coonect one wire to where you want it. Then the next. And so.

@gph42 4 месяца назад

Tremendous Jeff. Well done.

@danielprivate7442 4 месяца назад

Pretty smooth, Jeff.

@1one3_Racing 4 месяца назад

Next time I see you do I get a ride in the car? That interior is PLUSH

@KirkVSSpock 4 месяца назад

Great great mod !! You could have used butyl tape to seal the plastic sheet onto the door frame

@richardjones38 4 месяца назад

Guage calibrators are available off the shelf to make mismatched gauges and senders work together for things like fuel level and temperature. They're not especially expensive.

@HomeBuiltByJeff 4 месяца назад

I just looked them up and have ordered one. Thanks :D

@owenolsen240 4 месяца назад

Hi Jeff, really enjoyed watching hing make those electric window switches, bloody clever of you, amazing. Just a thought on yr center console, some nice oak or walnut veneer would keep it " period" looking, maybe . Thanks for another brilliant video. Cheers from NZ

@davem8972 4 месяца назад

Nice work Jeff! My only constructive comment is that the black/brown insert on the door cards just look off - not straight. I think doing a diagonal version where they match the slant of the cutout would look much cleaner

@garysmith9985 4 месяца назад

You made it understandable. Thx.

@willemjordaan4108 4 месяца назад

I would go with a notch/dimple plus center springs.. 😊.. Well done. Greetings from South Africa!!

@alandavey3010 4 месяца назад

Jeff thanks diodes I am having the same issue with my 32 ford roadster I will get some thanks again

@MrAndrew1400 4 месяца назад

Very nice solution Jeff!!

@Pats-Shed 4 месяца назад

Hello Jeff , great job with the window winders . The wiring can be complex when you first look at it . If you have difficulties with the switches then you can use window switches from an old car as they will have the double pole , 3 position layout that you need for bidirectional motor control . It's much simpler if you are using a PDM to control the windows like modern cars and you can set it up to close the windows automatically with the central locking and also auto reverse if the window becomes jammed due to someone's finger in the way.

@resveldt1967 4 месяца назад

If your look for nice future project window switches , bmw 6 and 7 series type 1 from the ‘70 have a nice look. But I like the way you did this!

@peffancekk 4 месяца назад

Il piccolo finestrino che funziona benissimo si chiama "deflettore" ai tempi per arieggiare l'abitacolo o fumare sigarette senza impestare gli occupanti era eccezionale 🤙

@rjung_ch 4 месяца назад

It was great when the majority of people did smoke. Now when you open your window in the rain, in most new cars the water just come right in. Now there are hardly any rain gutters left, not much can hold the water back now.

@MarkoVukovic0 4 месяца назад

These cars didn't have AC, so they were great in the summer to get air in. VW Beetles had similar.

@alman6581 4 месяца назад

Those little quarter windows are fab. I used to turn them in the opposite direction and they gave so much fresh air into the cabin on a hot day. #1750GTV Also on new vapour barriers I simply use 3M double sided tape. Yes it goes off over time, but I then simply add more in years time --------- and it's so much tidier than that horrible OEM sticky mastic..... yuck Great circuits. For swapping doors I have used a toggle from wing mirror adjustment - but year the hardest part is always to find switchgear that 'looks right' in the period correct space. Love ya work Jeff @@

@georgedamouras3454 4 месяца назад

Great video Jeff your car is awesome 👌 good luck with all the rest of it BTW your power window switches are rad looking forward to seeing what is next

@S1ckbg 4 месяца назад

The window regulator rails needs a little bit more lubing but otherwise very nice job. Well done ! About the vapor barrier i would use double sided tape ;)

@jamesdeath3477 4 месяца назад

That's really clever. Top job.

@bobbybean05 4 месяца назад

Don’t need any diodes , just supply both sides of the warning light. When you put the left indicator on the warning light grounds out through the right indicator and the same happens with the other one , that’s how the factory did it

@HomeBuiltByJeff 4 месяца назад

I never thought of that, but it makes perfect sense.

@volvogt21 4 месяца назад

Clever work on the switches. Make sure the dash bulb has its own earth. Many setups like this don't and rely on the non activated indicator bulb to supply the earth. Clever arrangement but a pain for you. If it is not earthed directly then do so with one lead from the bulb. the other goes to the left and right circuits with diodes inserted as you described. make sure you get the diode direction correct. Anyway I'm sure you'll do whatever you want and then fix the mistakes later. It's how you roll.

@nomad6638 4 месяца назад

Excellent stuff once again Jeff 😎👌🏻👍🏻

@l9jjp 4 месяца назад

Wow, you are such a clever man, jeff .. i love watching you solve problems. i am amazed how you find a solution to all the issues ...fantastic viewing

@paulsprojects1 4 месяца назад

great idea with a superb result 😎

@ndpesicgroup 4 месяца назад

Great work !!! Creative set up !!!

@ronaldmatthews9474 4 месяца назад

Absolutely genius to use original window winders as switches. I have never seen that before, and it adds convenience to authenticity.

@martinm4961 4 месяца назад

Great to see this coming near completion!! Looking forward to seeing what you do with the truck!! 😃

@johnnysmith863 4 месяца назад

Nice. That works great.

@kevingayadeen7253 4 месяца назад

Great Job even though the taps and drains was creating havoc with the brains. 😊

@DAGGWOOD139 4 месяца назад

Awesome Jeff I love the episodes like this where you think outside the square to get it done

@AW_DIY_garage 4 месяца назад

When you started working on the mounts, all I could think is how the plasma table is tailor made for this kind of project. Then you mentioned the stand off (bushing?) And I thought about the lathe. It is amazing how great those tools are. Fantastic work Jeff

@jimgerock9190 4 месяца назад

Great fabrication on those switches. Reminds me of older steering column turn signal switch stalks.

@enricodigenova8112 4 месяца назад

That’s really cool mate great job 👍👍

@billweston6579 4 месяца назад

Your comparison of water and DC electricity is correct. As are the diodes.your window switches are awesome! Love the CNC plasma table.

@francescoleovirisario8704 4 месяца назад

Hi Jeff, I am calling from Switzerland and I was wiring a lot of those cars in the past. You can just wire one part of the control light with the right indicator and the other part with the left indicator. The resistance of the indicator bulbs (front and back) is so high that they are not going to light up but you will still have a ground connection through the bulbs. This gives you a closen circuits and the control lamp will light up. Easy as that!

@Mr_Spegru 4 месяца назад

Yes that's probably how it was originally. Interior bulbs are such low power compared to the actual indicators that when placed in series, only the interior bulb comes on. Would be fine as long as the indicator bulbs are not LEDs as those take almost nothing to light them

@b3nny90 4 месяца назад

Hey mate instead of the mastick you used for the vapour barrier you would probably be better off with butyl tape. Car builders sell it and it makes life so much better. A lot less mess and crap when you have to pull the barrier off and on as much as you do.

@seanalexander9531 4 месяца назад

Love those switches - neat job!

@lotuselanplus2s 4 месяца назад

Hi, your diagram might be faulty as per the warning light for the indicator, you have the feeds from the indicators going to the warning light with a ground on the other side. I've never seen it this way, rather there is no seperate ground but instead you get power from the indicator circuit in use with the current going through the other indicator side and through the filament to the ground, the real reason with filament bulbs that both sides dont flash is that the warning bulb is a mich less wattage than the indicator bulbs themselves.

@donfinch862 4 месяца назад

Great work Jeff, all the fiddly bits. And you're getting your head around the electrical stuff, which can be quite rewarding

@rjung_ch 4 месяца назад

Nice analogy with the water and electricity Jeff. Thanks for another one 🙂 👍💪✌

@davecurphey4879 4 месяца назад

Brilliantly neat solution, really nice work

@RavenElegance 4 месяца назад

Suggestion: Adding a sprung ball bearing in dead centre and the two up/down extremities would make the movement feel more firm and positive, more 'OEM'. FYI: Car builders Australia do a great vapour barrier kit, with a roll of mastic sealer that looks neater than a squirt from a gun. I've used it and it comes out great.

@user-cn8oi1mc2k 4 месяца назад

good idea!!

@martinblack5021 4 месяца назад

Such good timing. I was sketching out my own ideas for using the old winder handle. You can actually buy switches in usa but they are about USD 250 each.

@HomeBuiltByJeff 4 месяца назад

Exactly. Expensive for a switch you still need to fabricate mounts for ;)

@martinblack5021 4 месяца назад

@@HomeBuiltByJeff I have some OE window switches i will re-use, operated via a cam wheel directly connected towinder handle - with some springs and stops. Quick question - what did rubber conduit are you using for the wires to pass through from door to a-pillar shut?

@bigmac60 4 месяца назад

Very nice job. You definitely have improved from the original CAD. 😂

@JustinTrobec 4 месяца назад

Brilliant. Love it

@lemmy9996 4 месяца назад

well done mate!!👍👍

@russellcameron9035 4 месяца назад

You’re amazing Jeff. I would never have gotten my head around those 4 relays lol

@1one3_Racing 4 месяца назад

You think by now Mrs Jeff would know cars inside out!

@cretebest3202 4 месяца назад

Good morning from Crete/Greece!

@repairupdaterepeat5815 4 месяца назад

6:32 flow and return 😉. I had the same issue adding indicators to a scooter I was building. Make sure they're overspeced for what you need and not matched. I burned the first set out fairly rapid