Workshop Tour - July 2023.

Подписаться 2,1 тыс.

Просмотров 1,5 тыс.

50% 1

Workshop Tour - July 2023 - This video is a mid year workshop tour where I show the various machine tools in my workshop and my plans for the workshop in the coming 6 months.
~~~~~~~~~~~~~~~~~~~
𝐒𝐄𝐑𝐈𝐄𝐒 𝐏𝐋𝐀𝐘𝐋𝐈𝐒𝐓.
✦ The Workshop - • The Workshop...
~~~~~~~~~~~~~~~~~~~
𝗖𝗛𝗔𝗡𝗡𝗘𝗟𝗦 𝗢𝗡 𝗧𝗛𝗘 𝗞𝗡𝗔𝗖𝗞𝗟𝗘𝗥’𝗦 𝗪𝗢𝗥𝗦𝗞𝗦𝗛𝗢𝗣 𝗦𝗧𝗜𝗖𝗞𝗘𝗥-𝗕𝗢𝗔𝗥𝗗.
✦ Sticker-Board Playlist - • RU-vid Channel Sticke...
~~~~~~~~~~~~~~~~~~~
𝐔𝐒𝐄𝐅𝐔𝐋 𝐋𝐈𝐍𝐊𝐒.
Here are links for many items used in The Knackler's Workshop.
Books.
✦ Gears and Gear Cutting - amzn.to/3mxZKbN
✦ Milling Operations in the Lathe - amzn.to/3iHyg2f
✦ Vertical Milling in the Home Workshop - amzn.to/3Fjuypg
✦ Zeus Book - amzn.to/3zX8KvO
Camera and Filmmaking Equipment.
✦ GoPro Hero 7 Black - amzn.to/3uwFQBD
✦ GoPro Hero 7 Black Charger - amzn.to/3B2EctS
✦ Olympus PEN F Camera - amzn.to/3B2TNJT
✦ Olympus M.Zuiko 14-42mm Lens - amzn.to/3Fb2DYF
✦ Olympus M.Zuiko Fish Eye Lens - amzn.to/2Y5qQhY
✦ Olympus M.Zuiko 17mm Lens - amzn.to/3D1Zc4H
✦ Olympus M.Zuiko 25mm Lens - amzn.to/3iq9t2J
✦ Olympus M.Zuiko 30mm Lens - amzn.to/3A5wRIN
✦ Olympus M.Zuiko 40-150mm Lens - amzn.to/3iqXhyH
✦ Audacity - www.audacityteam.org
✦ Inkscape - www.inkscape.org
✦ OpenShot - www.openshot.org
Consumables.
✦ 3-in-1 Oil - amzn.to/3iqJUhQ
✦ Brasso - amzn.to/3kX4Hv3
✦ Dykem Layout Fluid - amzn.to/3l0L0m4
✦ Loctite 603 - amzn.to/3A0pUbK
✦ Union Jack Coffee Mug - amzn.to/3D7Upyu
✦ WD40 - amzn.to/3olrxPi
✦ Workshop Biscuits - amzn.to/3D71lvT
✦ Workshop Coffee - amzn.to/3l2GvHR
Hand Tools.
✦ Machinist Calc Pro 2 Calculator - amzn.to/3iqwbry
✦ Moore Wright Calipers - amzn.to/3l4BIG1
✦ Norton Sharpening Stone - amzn.to/3l1Pd98
✦ Randy Richard Scriber - email: RRINTHESHOP@GMAIL.com
✦ Workshop Knife - amzn.to/2YaQ8M9
✦ Workshop Torch - amzn.to/2WZTOjd
Machine Tools.
✦ Adept No 2 Shaping Machine - www.lathes.co.uk/adeptshaper/
✦ BCA Jig Borer - www.lathes.co.uk/bca/
✦ Deckel SO Single Lip Tool and Cutter Grinder - www.lathes.co.uk/deckel/page3....
✦ Dore Westbury Milling Machine - www.lathes.co.uk/dore-westbury/
✦ Emco Unimat SL Lathe - www.lathes.co.uk/unimat/
✦ IME Watchmakers Lathe - www.lathes.co.uk/ime/
✦ Kennedy Hexacut - www.lathes.co.uk/taylor/page2....
✦ Myford ML7 - Tri Leva Lathe - www.lathes.co.uk/myfordtrileva/
~~~~~~~~~~~~~~~~~~~
𝗦𝗔𝗬 𝗛𝗘𝗟𝗟𝗢.
✦ Instagram - / theknacklersworkshop
✦ Patreon - www.patreon.com/user?u=378142...
✦ RU-vid - / theknacklersworkshop
✦ My other channel - / channel
~~~~~~~~~~~~~~~~~~~
𝐇𝐀𝐒𝐇𝐓𝐀𝐆𝐒.
#Engineering #TheKnacklersWorkshop #Loftworkshop
PLEASE DON’T FORGET TO SUBSCRIBE ➤➤➤
ru-vid.com...
~~~~~~~~~~~~~~~~~~~
DISCLAIMER: Links in this video description might be affiliate links. If you purchase a product or service using one of these links, I may receive a small commission at no additional cost to you. The revenue I earn from affiliate links helps to keep my channel running and is an easy way to show your support and help me make more free videos like this. Thank you for the support!

Опубликовано:

11 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 52

@624Dudley 11 месяцев назад

Hello Paul, glad to learn you’re mended enough to visit the workshop again, that’s quite a milestone. Thanks for the tour! 👍

@TheKnacklersWorkshop 11 месяцев назад

Hello Doric, It is really great to be back in the workshop... I am on light duties for a bit longer but my life is so much better with the new hip. Thanks for watching and your support. Take care. Paul,,

@brianclark2370 9 месяцев назад

Hi.paul your workshop is 100% and I like your emco setup I am glad to see more like you with emco Machines. I have a emco maximat supper 11 with mill it is been with me for 30 years and is 100% Thank you and keep well. From brian w.germany😊😊😊

@TheKnacklersWorkshop 9 месяцев назад

Hello Brian, Many thanks for watching my video and taking the time to comment. As you can see I am a big fan of the Emco machines... I would love to own an Emco Maximat Super 11 at some time in the future. Take care. Paul,,

@russelldold4827 11 месяцев назад

Glad to see you properly mobile, Paul. Great variety of small machines, each with a solid reputation. I like your ideas of mobile ancillaries like the good lamp and coolant system. I agree that machine stand rigidity is very desirable. Thanks for sharing.

@TheKnacklersWorkshop 11 месяцев назад

Hello Russell, The new hip is wonderful... I have been doing some more thinking on the mobile ancillaries, I have got a small are compressor going which will be another fine addition. Thanks for watching and your support. Take care. Paul,,

@andrewdolinskiatcarpathian 10 месяцев назад

Hi Paul. Thank you for a most enjoyable and informative tour around your workshop. I remain envious of your machines and space. Above all, so delighted to see you back in your workshop after your hip op. Well done. 👏👏👍😀

@TheKnacklersWorkshop 10 месяцев назад

Hello Andrew, There is still the surface grinder and Deckel SO grinder to do but the rest of the workshop is now quite useable... now the hip is done and I am getting stronger I am really looking forward to using all the machines. Thanks for watching. Take care. Paul,,

@treetopspider 11 месяцев назад

HI Paul your little workshop has come a long way from when you first moved in. I love how tidy and organised you keep everything.

@TheKnacklersWorkshop 11 месяцев назад

Hello Johnny, It was supposed to be just one lathe and I got a bit carried away - lol... It was extra tidy as I was leaving it for a couple of months. I do try and generally put things away after using them. Thanks for watching. Take care. Paul,,

@BlueHeelersSteamEngines-Jim 11 месяцев назад

Paul.....I always love a workshop tour mate....thanks for the vid! - Cheers Jim

@TheKnacklersWorkshop 11 месяцев назад

Hello Jim, Many thanks for dropping by... It is a nice place to work... I am very pleased to be back in there... Take care. Paul,,

@MrFactotum 11 месяцев назад

eyup Paul You have accumaleted a great set of Machinary and tools, spot on👍👍 bfn Kev

@TheKnacklersWorkshop 11 месяцев назад

Hello Kev, Thank you... I am pleased with the machines, and even more pleased that most of them work now - lol. Thanks for watching. Take care. Paul,,

@Xynudu 11 месяцев назад

You're very well set up now Paul. Looks great. Nice set of equipment. Cheers Rob

@TheKnacklersWorkshop 11 месяцев назад

Hello Rob, Thank you... I am nearly back to normal service, so to speak and will be watching everyone's videos again. Thanks for your continued support. Take care. Paul,,

@hilltopmachineworks2131 11 месяцев назад

Thanks for the tour Paul. Good to see you getting around with the new hardware installed.

@TheKnacklersWorkshop 11 месяцев назад

Hello Tom, Thank you... The new hardware is working well and I am super pleased with it. I have another operation tomorrow to fix an issue with my tummy but it should be a fast recovery which is good news. Thanks for watching and all your support. Take care. Paul,,

@richpost4305 11 месяцев назад

Hi Paul. Restoring old Unimats to working condition is a noble cause, that more folks may enjoy these delightful little machines. My second SL is a "Frankenstein", put together from random parts, everything fit perfectly. I always wanted a Unimat as a kid, but $99 was a fortune back then ...

@TheKnacklersWorkshop 11 месяцев назад

Hi Rich, I enjoy taking a tired one and bringing it back to life... and it has allowed me to gather quite a few accessories... I generally try and put them back to as near original as economically possible. Thanks for watching. Take care. Paul,,

@RetroSteamTech 11 месяцев назад

Workshop is looking good Paul. You've come a long way with it in a fairly short period of time. Have you thought about building a sturdy fixed bench against the wall where the Dore Westbury is? It would give you a much more rigid base to mount your machines on. Cheers, Alan.

@TheKnacklersWorkshop 11 месяцев назад

Hello Alan, Trying to make the Myford and Dore Westbury more stable are quite big goals. The current bench misses the mark quite a lot, what you're suggesting will most likely be what I do... Today was my first real day back in the workshop which was really good. Thanks for watching. Take care. Paul,,

@nobbysworkshop 11 месяцев назад

Thanks for the guided tour Paul. I wish I had a workshop as big as yours. I'm so cramped for space in my one. It would be great to have all the machines set up ready all the time. Glad you're back in the shop again. Keep happy Cheers Nobby

@TheKnacklersWorkshop 11 месяцев назад

Hello Nobby, I am lucky to have the space but it wont be for much longer as my mate below will retire soon and I will need to find somewhere else, hence the plan to shrink things a little. Tomorrow is my first day back there which will be really good. Thanks for watching. Take care. Paul,,

@JamesP_TheShedShop 11 месяцев назад

Love admiring other's shops and gear. Thanks

@TheKnacklersWorkshop 11 месяцев назад

Hello, Thank you... It is now starting to take shape, Three years ago I did not own any machines so I have come a long way getting what I showed... Thanks for watching. Take care. Paul,,

@GardenTractorBoy 11 месяцев назад

The wood floor downstairs is very interesting. The capstan lathe is very cool. Thanks for the tour, I really like your workshop layout and you keep everywhere very tidy, we need to do better.

@TheKnacklersWorkshop 11 месяцев назад

Hello Joseph, The floor is really cool and must be very old, I have never used a capstan lathe so a good leaning exercise for me there. It is generally tidy but exceptionally at the time of filming as I was leaving it for a couple of months. Thanks for watching. Take care. Paul,,

@colindrakes4607 11 месяцев назад

Very good video Paul, I love to see other people's workshops, and hear how they plan to arrange them for maximum convenience. You deserve massive credit for keeping it so tidy, expecially with your recent mobility issues, which are now thankfully resolved, I hope, all the best for that. I would respectfully suggest the off hand grinders could be very useful if made easily movable, with a selection of different wheels, wire wheels or buffing material wheels. Your idea for the portable coolant tank & pump probably has a lot of merit, I think I personally would try and avoid using it on the BCA at least, I'm not a fan of flood coolant unless the machine has guards to stop it splashing everywhere. I just associate it with an awful sticky mess that creeps everywhere and causes corrosion if not cleaned up promptly. I built a system for one of my Pultra lathes, but have never filled it and put into use, as I had second thoughts. Wish my workshop was as roomy and well lit. Best wishes.

@TheKnacklersWorkshop 11 месяцев назад

Hello Colin, Most people are suggesting that keeping the grinders are advisable... It is interesting to hear your thoughts on the coolant and the BCA, I will keep that in mind. I do think it would be useful to have one shared system for the Myford, Dore Westbury and Hexacut, so will most likely move forward with that. Thanks for watching and your support. Take care. Paul,,

@kimber1958 11 месяцев назад

Shop is looking great

@TheKnacklersWorkshop 11 месяцев назад

Hello Kimber, Thank you... It is great to be back in the workshop... Thanks for all your support. Take care. Paul,,

@JourneymanRandy 11 месяцев назад

Happy to see you out and about. The shop looks well organized. I always felt each tool must have many uses. Take care Paul

@TheKnacklersWorkshop 11 месяцев назад

Hi Randy, Thanks for dropping by... I am really on the mend now and should be in the workshop more and more from now on. I am really going to try and go with a quality not quantity approach in the workshop and shareability across machine tools. Take care. Paul,,

@MissouriOldTimer 11 месяцев назад

you sure do have some nice machines, a lot of it, I probably wouldn't know how to use.

@TheKnacklersWorkshop 11 месяцев назад

Hello Vernon, I am really pleased with my little workshop and the machines I have purchased. I am lucky to have done a 4 year engineering apprenticeship, which gave me a good knowledge in using many of the machines I have. To be truthful, I enjoy making things by hand the most but a machine has to be used some of the time. Thanks for watching and your support. Take care. Paul,,

@TheShadeTreeFixitMan 11 месяцев назад

Interesting tour, Paul. Thanks for showing us around.

@TheKnacklersWorkshop 11 месяцев назад

Hello George, Thanks for dropping by, sorry I have been off the radar at your channel but just been having my new hip fitted. I hope to return to normal service shortly and will catchup with what be going on at your place. Take care. Paul,,

@georgeclements2742 11 месяцев назад

Hello Paul, don't get rid of the double ended grinders, they are too useful and it's a pain in the backside to keep changing wheels, discs and brushes. Mounted on the bases like the drilling machines they take up little space and can be clamped in the Workmate when you need them. I keep one with a steel brush and a brass brush and another with medium and fine grinding wheels. You also don't then have to worry about getting grinding sparks and debris on the machine bed and the rotational speed is appropriate for metal rather than wood. Hope that the new hip is settling in well. Best wishes.

@TheKnacklersWorkshop 11 месяцев назад

Hello George, I get what your saying about the grinders and it makes perfect sense... I have a little idea about making some sort of workstation for the small drilling machines which could accommodate the grinding/wire wheels... Once I am fully up to speed again I show you all what I am thinking. Thanks for watching. The hips recovery is going well and I hope to make my first visit to the workshop tomorrow. Take care. Paul,,

@metalworksmachineshop 11 месяцев назад

Hello Paul. Awesome workshop you have.

@TheKnacklersWorkshop 11 месяцев назад

Hello Doug, Thank you... I will catch up with your video shortly... Thanks for watching and your continued support. Take care. Paul,,

@BensWorkshop 11 месяцев назад

Interesting. If I had the room for a capstan lathe I'd have one. Great for making multiples of.

@TheKnacklersWorkshop 11 месяцев назад

Hello Ben, Thanks... I am keen to get to grips with the capstan as I have never used one before. I like the thought of working out the logic to be able to set it up before a production run. Take care. Paul,,

@BensWorkshop 11 месяцев назад

@@TheKnacklersWorkshop Yes, it would be interesting.

@davidberlanny3308 11 месяцев назад

Hi Paul, hope you're doing well and past the two mile target. Interesting to see that the downstairs floor is wooden, obviously would make sense given the original usage. Are there any remains of the railway lines nearby, there was a number of sidings at one time. You've got so much interesting machinery up there. I'm not sure which one I would like to see running first, be great to see that capstan lathe running. Look after yourself and have a great week

@TheKnacklersWorkshop 11 месяцев назад

Hello David, You know the area well being a Pompey boy... I should be in the workshop again from tomorrow and start to get all the machines up and running. My first job is to change the belts on the Myford. I am really looking forward to getting back in there. The hip is working well and I did no further than 2 miles twice a day as that seemed more than enough. Thanks for watching. Take care. Paul,,

@trollforge 11 месяцев назад

Very nice space Paul!

@TheKnacklersWorkshop 11 месяцев назад

Hiya, Thank you... I know a lot of it has been seen before but I thought I would take a snapshot so we can see the changes in the next six months... Thanks for watching. Take care. Paul,,

@Steviegtr52 11 месяцев назад

Some nice old machines you have Paul. Great collection. Have you had the Hip done yet.??. Steve.

@TheKnacklersWorkshop 11 месяцев назад

Hello Steve, Thanks for watching the video... I had my new hip fitted 6 weeks ago tomorrow and all went well... I hope to return to the workshop tomorrow but am on light duties for another 6 weeks. Thanks for your support. Take care. Paul,,

@Steviegtr52 11 месяцев назад

@@TheKnacklersWorkshop Hope it heals well. Steve.