No video :(

Workshop Wednesday. Peco Turnout Repair

Подписаться 1,6 тыс.

50% 1

I cannot remember how long I have had these three broken Peco turnouts or even where I got them from but they have sat around for years. Once I decided to repair them it didn't take long and they work as good as any other. Two are short RH points and I was surprised to fid that the one I demonstrated in the video is a long "Y" point.

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@chrissharp5073 3 месяца назад

Really well explained. I have a box full of old Peco turnouts/points that are from my early days of modelling n gauge (50 years plus) all of which are in a pretty rough state. You have inspired me to refurbish/ rebuild them all. Your right about being a bit pricey so upgrading and fixing them makes good sense. Thank you for sharing and saving me a few quid!

@trainsontuesday 3 месяца назад

Hi Chris. The best way to do them is as and when you need them so that you can install them with supporting track on the ends and ballast will also help to keep them together.

@Imieitrenimodello 6 месяцев назад

Hello dear David, Unfortunately, in order not to succumb to the crazy increase in the price of our beloved hobby , the only valid system is the one you show us in this excellent video. You repaired an old turnout very well but unfortunately not all of us are capable of doing it and I am among the latter. Great like for your video tutorial.Have a nice weekend,Alberto 🚂🚂🚂🚂👍👍👍👍👍👍👍👍👍👍🙋🙋

@trainsontuesday 6 месяцев назад

Hello Alberto, thank you for this great comment. In today's market we must all look for ways to save. For me it is part of the fun, to challenge my mind and my hands. If this helps someone then I am happy. Take care, David.

@oscarpaisley 6 месяцев назад

Great work on the repair. They are such a fragile items. It’s great to get a bit more out of them. Oscar

@trainsontuesday 6 месяцев назад

Hello Oscar. They went together quite easily and they seem to be quite robust. I shall have no qualms about using them when I find the need. David.

@thebrummierailenthusiasts5329 6 месяцев назад

I’m pleased to tell you this that they’re bringing in the national festival of railway modelling to the national exhibition centre in Birmingham

@trainsontuesday 6 месяцев назад

Thank you Scott.

@monsvillerailways5736 6 месяцев назад

Good fix David. Always satisfying to save something from the junk or spares bin. 👍 Happy Modelling

@trainsontuesday 6 месяцев назад

Hi Mon, they could easily have been thrown out years ago but I saved them and the time seemed right so.... I think I saved about $75.00 fixing those three turnouts.

@raymondrion6712 6 месяцев назад

Thanks David for the info on repairing a turnout.

@trainsontuesday 6 месяцев назад

Hi Ray, not everything works but this job did. Cheers, David.

@tracksidemike 6 месяцев назад

Great share David like how the trunout turned out thanks for sharing and enjoy working on the layout. Have a great day

@trainsontuesday 6 месяцев назад

Yes, the turnout turned out great, actually all three did.

@dundasjunctionmodelr.r-jam8267 6 месяцев назад

David great job on repairing the old Peco turnout

@trainsontuesday 6 месяцев назад

Thank you James, all three are now usable again.

@davestrains6816 5 месяцев назад

Great job on the repair. Prices have gone up so much one has to try that. Thanks for sharing. Dave

@trainsontuesday 5 месяцев назад

Yes Dave, we are almost being priced out of our hobby. I expect that these three turnouts will give many more years of service as long as I handle them gently as I install them. David.

@MrSnooze 5 месяцев назад

That's a superb repair, a great video David

@trainsontuesday 5 месяцев назад

Thank you Jonathan, it turned out really good, I should be able to get some good service out of them. David.

@Calvertfilm 5 месяцев назад

Well done I wouldn't normally even attempt it, so good to know it can be done.

@trainsontuesday 5 месяцев назад

Thank you Laurie, they have turned out surprisingly sturdy. Placed in a permanent spot with spikes either side of the rails they should be good for years. David.

@Calvertfilm 5 месяцев назад

Good stuff David. @@trainsontuesday

@sparky107107 6 месяцев назад

go to some of the smaller trains show and they normally have books of track for sale,, as is of coarse.. you show a good way to bring some of that old track back to life

@trainsontuesday 6 месяцев назад

Hi Sparky. Most would have just thrown them away but with my frugal nature I just had to try to salvage them. I always look for bargains when at train shows, that's probably where I got these from. Cheers, David.

@Andystrainsandmore 5 месяцев назад

Very good job, David. 👍 Cheers Andy 🤠

@trainsontuesday 5 месяцев назад

Thank you Andy, there are a few more years of service in those points now.

@OldcampRanch 6 месяцев назад

Good tricks and tips👍🏻

@trainsontuesday 6 месяцев назад

Thank you.

@lashendawest7509 6 месяцев назад

Great video David

@trainsontuesday 6 месяцев назад

Thank you

@anfieldroadlayoutintheloft5204 6 месяцев назад

Good video thanks lee

@trainsontuesday 6 месяцев назад

Thank you Lee.

@newlynnrailway 6 месяцев назад

Good fix, I`ve had a few where the end ties have come astray and those tiny z springs are a pain to thread back into place on the newer version.

@trainsontuesday 6 месяцев назад

Thank you Clive, they seem almost as good as new but I will restrict hem to a low use area. The Z spring on the last of the three was bent and I had a bit of a job getting that one together. It snaps into place one way but needs a little nudge to go fully over the other way. I'm happy with the result. Cheers, David.

@stevenpeaketrainsandstuff3682 6 месяцев назад

Hi David, anything goes when it comes to repairing points. Darn things are so bloody expensive now. That's a pretty tidy method you've developed. It's better than what I do, drilling fine holes in the ties and replacing the worn/broken chair with a pinhead tack to lock the rail down. I go through a lot of fine drill bits and it doesn't always work. Steven

@trainsontuesday 6 месяцев назад

Hi Steven, I'm sure there are many methods out there. I have thought of spiking the sides of the rails once I have them mounted in a permanent spot. All three ae now done and tested, the loco ran through just fine. Cheers, David.

@lashendawest7509 6 месяцев назад

Good morning david

@trainsontuesday 6 месяцев назад

Good morning to you.

@modelrailroader5619 6 месяцев назад

I’m suffering from sticker shock, too. Just bought a Peco medium radius code 100 electrofrog turnout from a bricks and mortar shop. I’m not going to tell you what I paid…😳😢

@trainsontuesday 6 месяцев назад

Yes, they are getting to be terribly expensive. I guess that I saved around $75.00 doing this.