No video :(

World's Most Overengineered Water Rocket!

Подписаться 107 тыс.

Просмотров 23 тыс.

50% 1

In this video I set out to build the world's most overengineered water rocket! I used PVC pipe and a soda bottle connected to an air compressor. I machined a locking mechanism out of aluminum and plastic which is driven by a pneumatic actuator. The rocket is launched using radio transceivers capable of working up to 15km away! I had a blast making this project.
New videos are uploaded as soon as I finish them!
Try Altium Designer for free: bit.ly/AltiumB...
Get 30% discount on purchase: bit.ly/AltiumD...
To get PCBs for $2 and a shipping discount on your first order visit: jlcpcb.com
Affiliate link for LoRa radio module RYLR896: amzn.to/2HSPaf6
If you want to become a byte sized supporting member you can do so through either Patreon or RU-vid memberships. This is a great way for me to connect with you on a more personal level while at the same time getting access to cool stuff like early release videos, behind the scenes content, and monthly hangouts. Please visit either of these links to learn more.
/ @bytesizedengineering
/ bytesized
If you're interested in what tools I use for byte sized projects, please visit: www.bytesizede...
Byte sized merchandise:
teespring.com/...
As an engineer I spend most of my time problem solving and I think that's an extremely important skill. I have learned that complex problems that may seem impossible at first, can be solved by breaking them down into “byte sized” pieces. I hope that my viewers see my passion and enthusiasm for making things, and that it inspires them to make something that they're excited about.
If you’re new here you may not know that I make a lot of other cool project videos like this. If you enjoy these kind of project videos, please consider subscribing to byte sized. I really appreciate you taking the time to watch this video.
www.youtube.co...

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 58

@FishersShop 3 года назад

What an awesome build! You’re pretty amazing man!

@octodyne 3 года назад

Growing up in Europe, I made rockets that were similar with a bicycle pump. At the time, Germany had re-usable PET bottles with much thicker walls, which could hold a LOT more pressure than a US 2 liter bottle. The would fly as far as a traditional rocket. You could significantly optimize your design by making a smaller nozzle for the water to come out of, it will give you much more thrust over a longer duration an enable much better flights. Fins will help stabilize it, but a more weight efficient design is like a bottle rocket, with a stick for stabilization. For this to work properly, your stick needs to be 9 times the length of the body. The bottle will expand as you pressurize it, so I'd recommend taping it on with gaffer's tape (as opposed to glue) I love that the launcher is so overbuilt!

@MrNlce30 3 года назад

You might want to put some PTFE tape on the threaded insert (bottle top) to help make it air/water tight. Great video. Keep up the good work.

@bytesizedengineering 3 года назад

That's a great suggestion. It's a pretty tight seal already, but it can't hurt.

@sandeepkapare 2 года назад

Just awesome! Was hoping to see you use electron microscope to solder the PCB components 😜

@strikerz2668 Год назад

If u add little weight to the bottle it might go further

@danielmatthews8475 3 года назад

You have way too many toys available to you at work! I'm jealous!

@danielmatthews8475 3 года назад

You should consider 3d printing some fins for you 2l bottles too.

@bytesizedengineering 3 года назад

Thanks @@danielmatthews8475 ! But you have them available to you at home! I did 3D print some fins and a nose cone for some clear tube, but not the 2 liter bottle.

@redballthing 3 года назад

Wow dude, I'm so sad that RU-vid didn't recommend this to me earlier, your projects are absolutely stunning

@bytesizedengineering 3 года назад

Thanks Jovi!

@impyworm115 Год назад

Awesome video! I love how you break down each step of the process!

@KanalPaterPio 2 года назад

a little overengineered, yes. But so much fun!

@user-le6pr4vc6g Год назад

Интересно

@metchiegabonada5822 3 года назад

Wow awesome !Very gifted and skilled

@mircotaraborelli696 3 года назад

Hey, some consideration... "Soda bottle" have good efficiency because of their mass, so if you don't up so much the pressure use soda bottle... 3D printing is not sealed, you must coat it with resin... If you choose to design something different from soda bottle leave behind the uncomfortable screw connection of soda bottle and his high diameter

@bobfels5343 3 года назад

All that effort for remote control and then the compressor ties you to the wall socket lol! But cool project, awesome!

@AirCommandRockets 3 года назад

Taking over engineering to the next level! That's a very nice build. :)

@bytesizedengineering 3 года назад

Everybody has been telling me to watch your videos after seeing this! I did realize that I had seen some of your videos a long time ago! Thanks for your inspiration

@AirCommandRockets 3 года назад

@@bytesizedengineering Cheers! :) Keep up the good work!

@hosenzwen2258 3 года назад

Hello ... You are wonderful .. and your work ... You are multi-talented and skilled. Note: translation is by google. 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@tommyj7087 3 года назад

Over Engineer the crap out of a bottle rocket. CHECK!!! Awesome.

@bytesizedengineering 3 года назад

Glad you enjoyed this 😁

@letsgocamping88 3 года назад

Have you seen air command water rockets? Those are next level water rockets.

@bytesizedengineering 3 года назад

I haven't, I'll have to check those out

@letsgocamping88 3 года назад

@@bytesizedengineering it’ll blow your mind. 1000 feet plus altitudes. Hundreds of psi pressure.

@bytesizedengineering 3 года назад

I take that back! I just looked up their videos, and they look very familiar. I'm sure I've seen at least a couple. Thanks for reminding me. They have multi stage rockets which is incredible!

@marlingodspeed1526 3 года назад

Air Command Rockets laughing abut this toy rocket

@godofplumbing 3 года назад

I Found your channel by accident. You have a new subscriber, and I will share this as much as I can.

@bytesizedengineering 3 года назад

Thanks God!

@jacobysikui6502 2 года назад

Keep doing the great work, i could see the potential of your youtube channel 😊

@bytesizedengineering 2 года назад

Thanks, I'm working hard to reach as many people as possible to help them get excited about making things

@clowning76 3 года назад

Awesome project. I notice the bottle was not completely seal at locking point. If you put heat on the section where it locks and squeeze the pvc together it will make it a bit wider to seal the gap 100% as so the water f don’t leak out.

@bytesizedengineering 3 года назад

The clips shown were some tests. I ended up putting clear packing tape around the PVC pipe and it sealed really well.

@alexindustries44 Год назад

hi what is the thread of a soda plastic bottle cap?

@RCLoversan 3 года назад

Nice launcher! Now you have built the launching pad, how about the water rocket? 😁 I'm building the world 1st water rocket equipped with a double electric pump. I would say that one is the most over-engineered water rocket. 😉 Please take a look at it, watching video and the ones related to my turbine conversion.

@gauthiersublett 3 года назад

hello please, what height of shot with the bottle ? and after with the rocket ?

@bytesizedengineering 3 года назад

They probably went 100 feet (30m) in the air

@RandomBogey 3 года назад

I did not think that clear tubing would hold up to even that much pressure. I've come across them before, wondering the hardware store, and at first glance thought they were thicker, similar to schedule 40 PVC pipe, but was surprised by how thin and flimsy they actually were. In retrospect, I guess they're probably about the same thickness as the 2 liter bottles, though. What exactly failed on the rocket? I assumed the plastic tube expanded too much or the 3d print failed?

@bytesizedengineering 3 года назад

The clips of the custom red rocket were some tests. I ended up putting clear packing tape around the PVC pipe and it sealed really well. Everything withstood the pressure so far. I'm only at 40psi so not too crazy.

@vishaldhayalan2974 3 года назад

Great project! Does the bottle screw into something on the launcher? If so, how does it unscrew for launch? And if not, how is the water and pressure being held? Thank you :)

@bytesizedengineering 3 года назад

No, the bottle fits pretty snug over the PVC pipe. I did add a layer of packing tape to make a good seal. The only thing holding the bottle down are those locking forks.

@vishaldhayalan2974 3 года назад

@@bytesizedengineering ah nice! Thanks

@dubmob151 8 месяцев назад

Packing tape acting like a rubber hose washer?

@ruthdoyle9085 3 года назад

Try liquid propane...

@bzakie2 3 года назад

The world of hobby electronics is now officially out of reach for most of us.

@JCWren 3 года назад

Nice project! I need to replace my binocular microscope with a trinocular, and I'm curious what model you've got. For soldering irons, are you familiar with Metcal? Once you use a Metcal, everything else feels like you're using an antique wood burner :)

@bytesizedengineering 3 года назад

Thanks J.C. The microscope I have is an AmScope SM-6TX with a Cannon DSLR adapter. I really like the articulating arm mount because it's much easier to adjust than other types. If you are interested I have some affiliate links below. amzn.to/2TU9yPs amzn.to/3l5eM6Q Regarding soldering irons, yes I've used Metcal irons at various places I've worked. They are wonderful! I'm on a tighter budget here at home so I'm stuck with my antique wood burner :-)

@JCWren 3 года назад

I think you'd be surprised what you can pick up a used MX-500P-11 base, a wand, stand, and a few basic tips for. Take a look on eBay :)

@jonathanfulcher602 3 года назад

Awesome work! It may be my device but the audio seems a bit out of sync.

@bytesizedengineering 3 года назад

The battery started dying on my wireless mic at one point and that causes the audio and video to go out of sync. I fixed some parts but I could have done better.

@timrosencrans7955 2 года назад

You do realize they’ve been doing this better with a handful of zip ties for the last decade or more. This is all at the engineering level of about 2 while the current top end of water rockets is around 11. 1000 psi multistage rockets that fly over 2000 ft

@bytesizedengineering 2 года назад

You're totally missing the point of this video. Of course there are easy ways to do this. I didn't want to do it the easy way. That's why I over engineered the crap out of it.