WURTH Nut Buddy 

😂😂

They do that so you have to come back because you can't do it yourself . I worked in an oil change shop .

@@markanthony3275 haha nice try. They do it cause they are incompetent.

got that hurricane impact 10,000 mile tons for the oil filter.

No shit

Giggity.

They also sell a smaller version called the “Nut Buster” (I wish I was kidding loll).

Invented by Stewie griffin

Würth is a German company. For me from Germany as well the name "NUT BUDDY" sounds appropiate ; -)

Sounds like a gay nightclub.

@@meforelpresidente In German it's "Nuss Kumpel" or "Schraubenmutternkumpel".

🤣🤣🤣🤣

German's.....🤷🏻

Damn that sounds painful

Any tool with the name "NUTS" in it already feels painful 😬. Nutcracker, Nut Buddy.

So many possibilities. "Nut Lube" "Nut Penetrator" "Easy Nut" "Slippery Nuts"

LMAO true or not that is hilarious

lmao 😀

That's hilarious

@Bob Saget He is saying, the first guy was acting like he was struggling with a different lug nut then the second guy with the tool

Correct but I think it would still work quite well. Then again idk off the top of my head what lb/ft impacts get up to.

@@HowardSupra the one they showed is an automotive tire impact 200 ft lb max shouldn't be any where near a heavy truck. My repair 1/2 in impact generates over a thousand and it is nothing compared to a 1 in like is required!

@@imzackson thanks for the info

the baby impact wrench didnt help the case

I agree with that. I don't care if the impact is supposed to have a reverse breaking force exiting 550 ft lb of torque, it's still a wheel "lug nut" that requires at least a 3/4 in impact to break loose. and I've found that there are times even that is not enough, hence the need for the 1 in gun.

theres a few brushless 1/2 inch guns out there in the 700's. if it's overtorqued to 550ft lb the breakaway is going to be 420-460lbs, well in their range. No you shouldn't use them for that job, but you *can* , just as you *can* use a 1" to take a license plate off. Just shouldn't. But can.

*CSI music plays*

I'm nut your buddy friend

@@spicydiarrhea5662 Im not your friend, mate.

@@patrickbateman4148 I'm not your mate, bro

@@spicydiarrhea5662 Im not your bro, Mister.

🤣

Nice one! Cool name!

In Soviet Russia....we lug nuts in wheel barrow

In croatia we actually call them russian wrench(Ruski ključ)

I'm glad to know that I'd have a 'nut buddy' if I went to Russia.

Russia needs these beacause everything rusts over there. 1/2 year everything under 3 feet if snow and 1/2 year rusting😂🤣😂🤣

For loosening a right handed thread nut , he had the leg of the tool on the wrong side of adjacent nut.

For when you need some help loosening up

Fadi Matti mazda rotary engines have a 54mm flywheel nut torqued to all hell.. my half inch busts those loose lol

That also looks like a cheap ass air gun. I have a 1/2 in Ingersoll rand that could probably bust that nut.

Hye guys, it was a "dramatization" They were simply explaining how their product is used, and why it could be needed. Don't read too much into it.

Fadi Matti With a extension

150ftlb +60 degrees or about 350ft/lb total, Semi lugs are generally 500ft/lb and if over torqued like they are saying in the video could be MUCH more.

right.. i would use that 1/2'' for car wheels... no big truck tire guy or mechanic would even try using a 1/2''.. that's just stupid

Julio, thank you for choosing Würth. We're happy to hear about your great experience with Nut Buddy!

Alarichswiftpaw it's the first thing that I see

Anybody notice that you didnt see the lug nut loosened either.....

Yes I did it's easier to take off if it's already loosen up LoL but we aren't supposed to noticed that

Alarichswiftpaw SMH

yep

Mike Frech in German languages IT Sounds crazy "nussKumpel"

Mike Frech -- EXACTLY! I was thinking the same thing. Bunch of Commie name stealers.

Do you have any evidence of that conspiracy theory?

@@clausmadsen1257 What we do in Guantanamo, stays in Guantanamo.

@@clausmadsen1257 Mr. Madsen, It is now known, through Wikileaks, that the "Secret" military files of 759 of the 779 prisoners at the Guantanamo Military Base, were printed on 4,759 pages signed by the highest commanders of the Base Joint Force and directed to the Southern Command of the Department of Defense in Miami. The prison, which already existed since 1947 to "accommodate" Latin American communists, but improved by George W. Bush in 2002 outside of national and international laws, had its worst moment for the president, Barack Obama, when his first promise was: Close the Guantánamo prison. The announcement that he would resume trials in the military commissions was an acknowledgment of his failure. Upon leaving office, Obama said: In eight years as president, I could not close the prison or Guantanamo, or anywhere. The USMC is too powerful. If you are interested in knowing what the USMC really is, please ask me. I am at your service and command.

Or torque multiplier

Nice! I was wondering if anyone had tried em. Physics man! Lol might get me one.

The crab louse is better than sliced bread & canned beer.

calvingreene90 Eh, Calvin, not in Oz, it's not, old china plate! ;)

you came?

Ha me to.

I think the advertisement shows it in a wrong use case. With air available, a bigger gun would definitely be the better solution. It is a great tool when having no air compressor available on site. It can be used to fix equipment wherever it breaks down.

Yes a little baby impact and then they also used an extension which kills torque output.

I drive a semi and know those damn lugs are tightened to 100 foot pounds and are usually torqued to that point repeatedly until the lug nut does not move when hitting that torque value so a little 1/2 inch drive impact and 5/8 air hose is not going to break it loose there is not enough cfm to do that job

Robert Perry - They're torqued to more than 100 ft lbs. 1 inch impact guns are rated to 1500+ I believe(maybe a bit less tightening, but still probably over 1000), and I've always seen them let the impact hammer away until it stops.

I was wrong on the numbers I just had one of my tires changed and asked it's on average 475 ftlbsbut still a 1/2 inch impact isn't going to budge them

For what it's wurth, I'd have to say I want one.

You could say that , but you shouldn't.

Or that it is "Worthless" ... See what I did there

Shirley you must be kidding?

And a few teeth on occasion

@@polarablues64 Push the bar DOWN AWAY from your face, (use body weight if needed) problem solved. I will have 2 or 3 wheels done before you get one off with this thing. I will crack them all with the breaker bar 1-3 seconds per nut and then use an impact gun to finish them off.

@@davidbrennan5 I use it to change skidder tires. Same way break them free and zip off with the gun it's very fast and take very little effort. When I had only a bar it actually took longer and by the time I was done with 18 bolts my back was trashed.

@@davidbrennan5 my mistake, a few of your buddy's teeth and some knuckles then

@@polarablues64 definitely your mistake, I have never broken teeth or busted knuckles pushing down on a bar ever at waist to knee level with only air between me and the ground, a 3/4 drive breaker bar and a 3 foot pipe can crack 2 inch nuts easy.

5 feet of pipe and a 200-something pound guy....... Works well for me, anyway..

Or using the proper air tool, people don't use 1/2" drive air tools to remove wheel nuts on class 6/7/8 vehicles.

i would be very interested who on earth could make 4000 Nm force with pipes ... And if an idiot driver made tight the nuts with this equipment no man on earth could take it off by hand :D

Price..please..cosr

AND the extension reduces applied torque!

Exactly, I always used a 1" drive impact for those lugs. A 1/2" will barely knock the dust loose.

Sure buddy, everyone has a impact wrench😤 stop hating

Mine is 10". Now what?

Its and extended anvil gun not an extension...

Breaker bar with a pipe on it, with a piece of spring steel inside that with another pipe on that so its 12 foot long and bounce up and down.

Better be built to take it otherwise you will break the union

And what application in modern mechanics am i ever going to need 3000 pounds of torque?

I had exactly the same in my mind. @others please don't come with such kind of stuff that breaker bar+union can't handle this and that......If the nut buddy can do it it means it's components are suitable for that. Those components can be copied. You can build a stronger union and also a breaker bar if you really want and probably will cost you a fraction of the nut buddy price....

those nut buddy's Wurth is only a copy as with everything these days it looks exactly like mine just with a Wurth sticker on, they are way way cheaper than a breaker bar and union to handle the torque that these can handle

Please tell mom to come home. We're getting hungry.

Nope

Kathleen Shaw bull s**** I am not saying the tool doesn't work because I have not used. But the person demonstrating the tool is a complete idiot. It is on the wrong side.

Trusty Trucking only an idiot(read you) would come onto a forum/comment section and call anyone else an idiot on something that’s obviously too complicated for them(again read you) to understand. Lemme break it down for ya, the tool is taking your small amount of force over a very long distance(multiple rotations of the handle) slowing it way down and amplifying the force, the tool is then trying to twist the lug nut to the left, which, thanks to Sir Isaac Newton, we know would make the body of the tool try to rotate to the right at the same high level of torque that it is applying to the stuck lugnut, when it rotates to the right and hits the stationary lugnut beside it it then starts applying torque on the socket to the left. So yeah the guy demonstrating the tool that he’s trying to sell knows how to use it.

I think it's OK to use an extension.

Or better yet, just use a 1" drive impact with a 1/2" air line...... If that fails, add heat.

And heat if it's Rustville.

This tool marketing ad is just dumb. Whomever got paid to write up the script for this ad needs to get fired, they've obviously never done any research.

Get the heck umlaut of here! ;)

Christian Garcia just say „Christian Garcia“

🌰 Multiplier

A guy I worked with got her bad using a multiplier to open a stuck hopper door on a railcar. I didn't see it he was on another shift, but somehow he had it torqued up hard when something let loose I think it was the chain that was holding the multiplier handle, guess where it hit him. I can't remember how long he was in the hospital but I know it was well over a week, and he was out of work for at least six weeks maybe more. That was back in about 1990ish Shaw don't remember all the details, I do know they changed procedure about how to anchor the multiplier handle. I'll tell you what though it sure wasn't his nut buddy

Craigs Discount Auto Repair.

I've had truck lugs that wouldn't pop with a strong, healthy 1 inch air gun. Didn't have torque multiplier, so got 'em with 8 foot cheater and two hefty guys jumping on it. Broke the Snap-On breaker bar, but brought out the old SK and it did the trick. (Yes, we busted our asses on the floor each time one broke loose. LOL)

He does, aye. Wild wild west style.

He could sell me a Western style barbecue any day.

They cost like $80 and those jack bars are light and bend

sounds kinda gay

😆😆😆👍

Brian Laforge I was wondering if anyone else noticed that. If that nut had been tight, the tool would have spun around till the leg hit something.

It doesn't work like that. It's geared to push from the top side.

James Rogers not possible

Yeah... I saw it too! He should have swung it to the nut on the left... the one he was on originally.

Nicholas Hollow you're wrong, he's right. All of the videos even show it used the same. That's the genius of the tool. You just need to look again.

That is actually a GOOD thing and where life gets BETTER

A man made with lesser man parts!!! Murica!

millennials

I would assume someone like you

MrcabooseVG one that can't get his nuts off

Pussy man?

German......

Turk.. izeltaş

Nut bust you!!!!11

Russians do it with bare hands. At negative 35° Celsius. (don't forget to apply vodka INTERNALLY. Very important!)