Тёмный

X8R0249 Vauxhall/Opel 1.7 CDTi Injector Seal Replacement/Repair Kit 

X8R Ltd
Подписаться 13 тыс.
Просмотров 44 тыс.
50% 1

Link to purchase items: x8r.co.uk/vauxhall/injector-s...
SYMPTOMS OF FAULT
You may notice that your engine begins to run less smoothly, juddering or stuttering when idling and a noticeable drop in power output.
You may notice oil leaks from various locations around the upper engine block.
Oil may begin to leak into the cylinder resulting in blue smoke coming from the exhaust.
THE FAULT
Various seals fail causing these faults
Over time rubber seals within the engine can become brittle and lose their sealing capabilities resulting in leaks in various locations around the engine.
The common areas for these leaks to appear are:
The rocker cover gasket, when this leaks your engine will begin to consume oil and you may notice a burning oil smell from the engine bay.
Injector upper seals, these can fail and result in oil leaking from the top of the plastic rocker cover.
Injector union seals, these can perish over time and result in a failure of the seal, which will cause rough running as well as causing an oil leak.
Injector metallic seals, the engine relies on these seals to keep the combustion chamber sealed, if they fail then you will notice a drop in cylinder compression, as well as oil leaking onto the top of the piston, this could cause a puff of smoke when first starting the engine where oil has leaked through whilst the engine was off.
THE SOLUTION
Install our new seals and gaskets and cure these leaks and vehicle faults
Our kit is comprehensive, it contains all of the seals, gaskets, specialist tools and sealant that you will need.
By renewing the old seals that have become brittle over time you can give your engine a breath of new life.
Our kit uniquely includes parts that are unavailable from the main dealer enabling an effective repair without having to buy whole components such as the complete rocker cover.
This type of maintenance often helps the engine run a lot smoother, if your existing seals have failed and allowed the engine to lose vacuum then your engine may be pre-maturely wearing.
VEHICLES AFFECTED
VAUXHALL and OPEL
All vehicles with the 1.7CDTi engine found in:
Zafira 2005-2014
Astra J 2009-2015
Corsa D 2006-2014 (131hp)
Mokka/Mokka X 2012-current
Associated engine codes:
A17DTC, A17DTE, A17DTJ, A17DTF, A17DTS, A17DTR
YOU WILL RECEIVE
4 x Injector Union Seals - Equivalent to OEM 97376304
4 x Rocker cover injector seals (not offered by OEM)
1 x Rocker Cover Gasket - Equivalent to OEM 5607252
10 x Rocker Cover Bolt Seals (not offered by OEM)
4 x Injector Base Metallic Gaskets - Equivalent to OEM 97324391
1 x Injector Pocket Cleaning Tool - Equivalent to EN-47632
8 x Injector Pocket Cleaning Felt Pads Equivalent to EN-47632
1 x Injector Alignment Tool - Equivalent to EN48560
1 x Complete Blanking and Plugging Kit - EN6368
1 x Pack of RTV gasket

Авто/Мото

Опубликовано:

 

8 дек 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 39   
@tudordaniel9608
@tudordaniel9608 Год назад
great job guys. thanks alot.
@user-ev9wj5nu9h
@user-ev9wj5nu9h 25 дней назад
Big thanks.
@manuelsousa8208
@manuelsousa8208 Год назад
excelente vídeo. obrigado.
@cubanac
@cubanac 4 месяца назад
Bravo for video Fantastic
@thomaswolf8609
@thomaswolf8609 2 месяца назад
Hi, That is what I call a very well made DIY video. - Do these injektors need coding or not? - I miss this information in this video.
@X8RLtdUK
@X8RLtdUK 2 месяца назад
Hi there, thanks for the great feedback! The injectors shouldn't need coding out as they do not have sensors. - X8R Ltd
@fillforeli
@fillforeli 3 месяца назад
Отличное видимо.
@aleksusnemo4284
@aleksusnemo4284 5 месяцев назад
good
@sulmetani1165
@sulmetani1165 Год назад
thanks a lot abowt all this beatiful info.sulejman metani rrogozhine albania
@mardoomahomed4982
@mardoomahomed4982 11 месяцев назад
Hi, great video. Is this compatible with the chevrolet cruze 1.7 diesel which shares same engine as vauxhalls. A17DTS engine
@DejanSaran-tz6wu
@DejanSaran-tz6wu Месяц назад
Ia is difucult to change valve rubbers on zafira 1,7cm3 81kw 2009 years of production?
@daveawhittle
@daveawhittle Год назад
Do you do a kit for the older Z series engines? Z17DTL/H with the Bosch injectors?
@X8RLtdUK
@X8RLtdUK Год назад
Hi there, no we do not do a kit for the older Z engines at present. - Georgina, X8R Ltd
@user-lq1hi6bt8z
@user-lq1hi6bt8z 8 месяцев назад
Good day. Ring size?
@MadiliaSarwary
@MadiliaSarwary Год назад
two different types of alignment tool? at 16:25 and anouther at 17:10
@X8RLtdUK
@X8RLtdUK Год назад
The thicker one is a prototype and the other is the final tool. We usually test multiple types to ensure we design the best product. Apologies both are in the video. - Georgina, X8R Ltd
@sulmetani1165
@sulmetani1165 Год назад
is the same procedure to cleaning injectors//
@chuckles4208
@chuckles4208 Месяц назад
I'm looking the answer to this to
@kejdizeqaj9526
@kejdizeqaj9526 2 месяца назад
Bonjour monsieur Est-ce que c’est normal qu’il y de huile sur l’injecteur ?
@X8RLtdUK
@X8RLtdUK 2 месяца назад
Hi there, is it definitely oil? Could it be fuel or dirt?
@juo777
@juo777 10 месяцев назад
Pon el tapon de aceite....
@fatskunky
@fatskunky 3 месяца назад
How long should this take a mechanic? Thanks
@X8RLtdUK
@X8RLtdUK 3 месяца назад
Will vary by experience but we would estimate 2 hours.
@A7Xdookie
@A7Xdookie 7 месяцев назад
Will anything need repeogramming?
@A7Xdookie
@A7Xdookie 7 месяцев назад
Reprogramming
@miodragvrzic3026
@miodragvrzic3026 21 день назад
Could it be that the head gasket has blown the car to consume more?
@X8RLtdUK
@X8RLtdUK 12 дней назад
It would be impossible for us to diagnose that over messages. We advise seeking a diagnostic from a garage.
@ObsydianXshinsoo
@ObsydianXshinsoo Год назад
How much it will be posted?
@X8RLtdUK
@X8RLtdUK 11 месяцев назад
Hi there, it depends on where you are in the world. Please see our website www.x8.co.uk for shipping costs and timescales. - Georgina, X8R Ltd
@user-br7lp7jc8l
@user-br7lp7jc8l 12 дней назад
Підкажіть будь ласка розміри приспособи для фіксації форсунок.
@X8RLtdUK
@X8RLtdUK 12 дней назад
Sorry we do not provide dimensions. If you send us an email on sales@x8r.co.uk with your VIN we will see if our kit is compatible. - Georgina, X8R Ltd
@user-br7lp7jc8l
@user-br7lp7jc8l 12 дней назад
Дякую за відповідь.Набір для заміни вже придбали, стояло питання знімати форсунки чи ні.
@X8RLtdUK
@X8RLtdUK 12 дней назад
@@user-br7lp7jc8l Sorry I think the original translation was bad, you are more than welcome to send us an email with any technical queries and we will be happy to help. - Georgina, X8R Ltd
@clivebadboybaselineandlyri3963
@clivebadboybaselineandlyri3963 9 месяцев назад
clive
@robhalfhide
@robhalfhide Год назад
I wondered that...... I think it was 40
@X8RLtdUK
@X8RLtdUK Год назад
Yes it is 40nm, apologies for any confusion. - Georgina, X8R Ltd
@lanouvellevie1408
@lanouvellevie1408 10 месяцев назад
codage injectors
@A7Xdookie
@A7Xdookie 7 месяцев назад
What do you mean
@thomaswolf8609
@thomaswolf8609 2 месяца назад
@@A7Xdookie I guess he wants to know if the new injectors have to be coded into the ECU or he wants to add that they need coding. - Thats a good question here.
Далее
50 YouTubers Fight For $1,000,000
41:27
Просмотров 63 млн
Суши из арбуза?!
00:34
Просмотров 502 тыс.
Caravan Z17DTR 187045 km
1:06
Просмотров 31 тыс.
How To Replace An Injector Seal The Easy Way
13:19
Просмотров 115 тыс.
Wymiana rozrządu Opel Astra J 1.7 cdti
27:31
Просмотров 161 тыс.
впихнул турбину в глушитель
1:00