XCAP BMS Core Batteries - No Programming, No Error Messages, 100% Battery Health!

Подписаться 16 тыс.

Просмотров 9 тыс.

50% 1

InjuredGadgets.com Announces XCAP BMS.
The industry's first batteries that require no programming with our new reuseable tag-on flex. No error messages and instant 100% battery health!
Learn more at Injured Gadgets!
Recommended Tools
Ceramic Scissor
www.injuredgadgets.com/relife...
Smart Electric Sharpening Pen/Dremel
www.injuredgadgets.com/maant-...
Relife Rl-936W Portable Spot Welder
www.injuredgadgets.com/relife...
Battery Welding Fixtures
www.injuredgadgets.com/search...
XCAP No Programming Required Tag-On Flexes
www.injuredgadgets.com/search...
XCAM BMS Batteries
www.injuredgadgets.com/search...
Timecodes
00:00 Intro
01:15 No Programming
01:50 Reusable Tag-On Flex
02:55 Start of Repair. Original Battery with degraded health (83%)
03:45 Removing the Original BMS
07:48 Inside of XCAP BMS Packaging
08:30 Explanation of different types of welds
09:08 Attaching original BMS to new XCAP Battery
12:00 Explanation of how Tag-Ons work
14:30 IMPORTANT! Use the lighting cable to boot the phone!
15:30 First Boot will show battery health warning
15:40 Power the phone down, and reboot
16:35 Reboot, battery shows 100% health, no error messages, no programming required!
18:20 Removal of Tag-On Flex (Not required, but they are reusable!)

Наука

Опубликовано:

19 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 52

@iphonetechnicians2949 Год назад

Couldn't help but notice your WGP wristband. Interesting…

@mrphonenc Год назад

I was gonna comment about that too 😂

@Tech-wo1go Год назад

Either done purposefully. Or it’ll be mandatory termination. Lol.

@Tech-wo1go Год назад

What was Elon Musk do?

@InjuredGadgets Год назад

Haha, we love WGP!

@everythingismichael Год назад

Thanks guys

@22shak Год назад

Great Video, Whats the process for iphone XS battery? No tag on flex, will the Battery health need reseting using something like Qianli Icopy after the BMS has been swapped?

@STLiPhoneRepair Год назад

It looked like the line up of the leads and the board before welding was edited. Is there any tips for that? Is it required to clean the leads as shown and is there another way to do it without the tool you used? I noticed no tag on flex for iPhone X series, is none required and does the battery heath work? is there a message on those models? What about how to weld the iPhone XSmax with the two piece battery?

@wesday5261 Год назад

For x range is it simply the same process minus the tag on? Install bms and your done?

@toweliethetowel8280 11 месяцев назад

How do you know that these welding spots are secure and make lowest possible electrical resistance? Is there a way to check impedance? I just thought it could be unsafe if those connections have a high resistance and could cause heat or worse.

@patriciovarela8794 11 месяцев назад

Can I just keep the tag on the phone in order to avoid mistakes? My is working great I’m just afraid of taking the tag out

@chadbutcher6724 Год назад

Does the calibration remain after a software restore if the tag is removed?

@zedzed3124 Год назад

How about if you do a software update does the battery health still stay at 100% or go back to what it was before? Thank you

@jongarrett933 8 месяцев назад

I have been getting mixed results. I use Xcap batteries with Xcap pre-programmed tag flex, also JD ID tag flex with programmer. Around 1 in 4 repairs are unsuccessful. When booting the phone for the first time with the power cable inserted and tag flex attached the phone shows '0' percent and does not charge. The cable is attached to a good power adaptor. I follow the same process for each repair. I just don't understand why some work and some fail. Any ideas?

@sweetboyforlife Год назад

when are we gonna be getting programmers for the iPhone XS Max , XS , XR and X ?? WE NEED THOSE TOO

@dustins1216 Год назад

Did I see a little issue with the removal of the flex? Does it require a lightning charger to reboot after the tag on is removed, as well? Didn’t seem to want to come back on.

@raya.8963 Год назад

i noticed that too

@InjuredGadgets Год назад

No, we were using an older phone which has been used as our test phone for a few things. The device itself was a bit finicky.

@gabrielmartinez8416 9 месяцев назад

Do your xcap batteries support fast charging?

@dariusgilmore11 Год назад

The green camera stand thing your using to record the video where can I get that and what’s it called?

@InjuredGadgets Год назад

www.amazon.com/IPEVO-Communication-Real-time-Projection-conferencing/dp/B088NGLQL4/ref=asc_df_B088NGLQL4/?tag=hyprod-20&linkCode=df0&hvadid=459728334703&hvpos=&hvnetw=g&hvrand=7176230487289924325&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9010810&hvtargid=pla-923971371067&psc=1

@mikhailmalyar7977 Год назад

How can they be reusable without losing battery health? With all the tag-on flexes if you remove them after one full cycle battery health value returns to the previous. BMS ontroller is encrypted. For how long did you test this and what version of IOS?

@InjuredGadgets Год назад

IG leads the way in innovation. Try it and you shall see. We have been testing these for 3 months now prior to a release.

@raya.8963 Год назад

Awsome! Little confused on the removal of the tag on flex after programming and it being reusable. To confirm, we don't need to leave the tag-on flex installed after successfully programming (use lighting cable) the new battery, correct? If so, we can then use the same tag-on flex to program other new same model batteries, correct?

@InjuredGadgets Год назад

Hey Ray! You can remove the Tag-On after install and reboot! Yes you can use the same Tag On for a new same model battery. They are the first reusable tag-ons in the market.

@raya.8963 Год назад

@@InjuredGadgets right on, ty!

@ALFREDOLEMA Год назад

Can I use another brand of core battery with this tag on flex or only XCAP brand?

@sebsrepairs2315 9 месяцев назад

yes any battery will do

@mrphonenc Год назад

What about data retention after a software update?

@GamerBit Год назад

this

@InjuredGadgets Год назад

We have tested with multiple iOS's and an upgrade. Retains battery health and data just fine.

@MrOrangeman18 Год назад

Just added it to the original battery, powered it up from the charger and didn’t get any message. Just sees it as the genuine battery. What am I missing here?

@Dgtalenews Год назад

I can use other battery or only Xcap? With this jtag

@asktronicscom Год назад

Any battery works withIC transfer

@jonthecont Год назад

nice vid. never seen the bms spot welded in position on the cell before. Also how long until greedy apple log battery health and flags up if health resets to 100%? Just know this will happen one day

@valentinstefan4803 2 месяца назад

the checkout page is not working man..

@ashgould1987 7 месяцев назад

No matter how many times I do this. It never resets. Original battery health remains. I’ve tried on 11 / 11PM / 12 / 12PM / 13PM with several tagons

@markaffleck4622 Год назад

Is it absolutely confirmed that with the tag-on flex removed, the battery health indicated in Battery Health will go down over time as normal? I ask, because you state that the two iPhones that you stress tested over weeks and several months had been through several full charge cycles, and one in the video still indicated 100% health. Would it not be showing a slight drop by now?

@markaffleck4622 Год назад

@Mr Anon Did they just die completely? Do you think the JC and Qianli route is better?

@markaffleck4622 Год назад

@Mr Anon Thanks for the reply. Your findings are interesting! I have always been concerned about the 'You can remove the tag-on' versus the 'You need to keep it in' arguments. I do wonder whether the actual reported battery health via iOS will actually decrease as it should, again I have read repeated conflicting views on this. I like the Qianli, but where I am (UK) they can be as much as £15 per throw which really starts adding up! (And interestingly (Not surprisingly(!!) Qianli state they should remain in) A main, highly reputable mobile stockist here has just added these IG tag-ons recently. They have been stocking the standard batteries for a while. I know that IG said they have been testing these new tag-ons for a few months, but I honestly think that is a relatively short period of time to fully establish the findings. Once agin, thanks for your reply.

@asktronicscom Год назад

They work great! Call or email IG.

@jonthecont Год назад

ive just done this and got no battery warning and health is showing at 70% still? is this a faulty flex?

@jonthecont Год назад

update! connected to an oem battery and booted up phone. showed the warning so turned it off and moved the flex ic to new cell and its all working fine now at 100%

@MohamedAhmed-fv4gw Год назад

If we make the mistake to power on with button. Is that reversible mistake or once you make that mistake it won’t ever work properly ?

@InjuredGadgets Год назад

You can use another tag-on to boot it, and you'll get 100%

@phonerepairwizard4453 Год назад

@@InjuredGadgets If this mistake is made. Will the first tag-on still be good for the next battery replacement? I actually ran into this on an iPhone 11. My positive lead wasn't welded to good and I tried to boot it up with the lightning cable but it didn't recognize the first tag-on. Luckily after checking my welds and using a another tag-on, it did work and recalibrate to 100%. Just curios if the 1st tag on is junk now, or will it still work for the next battery replacement?