#M365EssentialSpeedHACK #SPEEDunlocked #XiaomiElectricScooter
Obviously changing the firmware and increasing speed of Xiaomi Essential also has sides that we can define as "negative". First of all, if you take advantage of all the additional power (especially in Sport mode) you will have a greater battery consumption (obviously proportionate to how much you use it).
Pure Sports Mode - 13-14km Range/Autonomy - FROM 100% to 1%
PLEASE SUBSCRIBE TO MY CHANNEL IF THIS VIDEO HELPED YOU IN ONE WAY OR ANOTHER
RECOMMENDATION: Correct tire pressure helps the engine to strain less and to reach the maximum possible speed (and therefore to avoid overheating). Correct pressure also helps to prevent premature punctures due to pinching or rubbing of the inner tube inside the tire itself. The tires should not be inflated by eye, precise pressure is required. I often help users who cannot reach good speeds with their scooter, and most of the time it is due to incorrect tire pressure! Know that a scooter that has just come out of the box often has pressures that are half that recommended. Low pressure leads to a "virtual" reduction in the diameter of the tires, reducing the distance per wheel revolution and therefore the maximum speed! As far as pressure control is concerned.
Other features of the firmware package:
NO KERS FUNCTION : kers is the recovery of energy in the deceleration phase of the scooter. This function may seem really useful, in reality it causes the control unit to overheat and also leads to a not very fluid ride made up of a succession of accelerations and decelerations, increasing battery consumption. In our firmware package, this energy recovery function during deceleration is deactivated and the scooter, once the accelerator is released, will roll by inertia. The front electronic brake (with Kers attached) remains active during braking and with identical parameters to the original Xiaomi software.
ANTI-TEAR FUNCTION (anticlonk) : the No Kers function originally led to a total shutdown of the engine during free roll. This led to the presence of a "vacuum" of power in the re-acceleration phase (when the engine was then re-powered), very annoying while driving. The tear-proof function keeps the motor in an active standby at very low wattage . This function therefore allows to have a great fluidity in the passage from the deceleration phase to the acceleration phase. Its presence is easily detected in the high wheel tests: if you accelerate and then release the accelerator, the front wheel will continue to turn, decreasing its speed very slowly . Obviously this thingit is not perceptible while driving the scooter and you will only notice a greater softness in gear.
CRUISE CONTROL A 3 " : the original Xiaomi software allows you to activate the cruise control after maintaining 5" at a constant speed. Interfacing often with various users, we found that this timing is exaggerated. Hence the choice to lower this time to 3 seconds.
START WITH REDUCED THRUST : even in this case Xiaomi is a bit exaggerated by imposing a minimum speed of thrust with the foot of 5 Km / h to start the scooter's gear. A speed that often leads to false starts which in certain circumstances (such as an intersection) can be dangerous.
HOW TO DOWNLOAD FILES
STEP 1. CLICK THIS LINK 👇👇👇👇
bit.ly/39UzbsO
STEP 2. CLICK THIS LINK 👇👇👇👇
XIAOMI ESSENTIAL 👇👇👇👇
ln.sync.com/dl...
if not working click this
drive.google.c...
8 сен 2024