This is a guide to removing and installing the stator cover on the Yamaha MT/FZ 07. All bolts were torqued to 10Nm (7ft lbs) of torque. The 2 bolts at the bottom of the stator cover were the only ones that required loctite. A new gasket is necessary for a new stator cover. The copper washer and O Rings are strongly recommended as well. However, not mandatory especially if your bike has low miles.
This is just video on how I did it. It’s not the only way of doing this. Please refer to the service manual for proper factory guidance on installation and removal.
23 окт 2024
