Yamaha Phazer Oil Change and Preseason Maintenance

Подписаться 1,5 тыс.

Просмотров 15 тыс.

50% 1

#yamaha #snowmobile #yamaharevsyourheart Yamaha Phazer Oil Change and preseason on the Yamaha Phazer. Many other things you could check but this covers many of the basics. One way to get to the oil filter: • Yamaha Phazer Loose St... Other Phazer repair videos: • Yamaha Phazer Steer Ahead
Get the parts I use below:
Suspension Spanner Wrench set: amzn.to/3YTqrJS
Snowmobile Ear Plugs: amzn.to/402JcM8
Air Pods: amzn.to/3j4ibqY
Stacool Scratchers: amzn.to/3HqLehH
Folding Saw: amzn.to/3kEBBTF
Kimpex Plug 993907: amzn.to/3HZLXXM
50/50 ready to use antifreeze: amzn.to/3WKODN6
Lock and Lube no leak zerk adapter: amzn.to/3xVemZv
Yamalube 2S: amzn.to/3FhsWyQ
Chain case oil: amzn.to/3vnlZ8F
DISCLAIMER: Not liable for anything you attempt after watching one of my videos. Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content!

Авто/Мото

Опубликовано:

25 сен 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@denozaur 5 месяцев назад

good job men! thanks you from russia

@targabill 8 месяцев назад

GREAT VIDEO... I JUST SUBSCRIBED

@billdemers6814 2 года назад

Great Job, nice steel toe shoes you wear!

@JustinParker-nk8oo 2 года назад

Any tips on the reverse not wanting to go in? I have to push up on the back of the sled to engage reverse or back to drive. I played with the chain tension and it didn't seem to do much..... Or is it just normal for the phazer?

@MiloFarms 2 года назад

Check out this link: ty4stroke.com/threads/phazer-reverse-issue.154999/ The 5th comment down from Mooseman has the tech bulletin. Read through that. The things I did are as follows and as long as the machine is warm the reverse shifts 99 percent of the time. 1st off it will NOT shift until the engine has warmed up and is no longer at high idle. 2nd I replaced the drive belt with the new belt with the updated part number. That takes some drag off the clutch to allow shifting. Check the secondary clutch spacing that it is correct and the new belt sits just at or above the edge of the secondary. Adjust with shims if needed. I also replaced the thick Yamalube gear oil in the chain case with Polaris SCL. It is fully synthetic and allows things to move easier when cold. This is what I did and it works great. Just go easy on it when shifting and you should be happy with it.

@gregsmith3410 2 года назад

Good thing oil filter change will last quite some time

@andylarson3547 2 года назад

Do you have to adjust the clutch for belt tension when installing a new belt?

@MiloFarms 2 года назад

Maybe.... Check out this comment I made to another persons question regarding reverse which plays into belt tension on these machines due to the reverse issues: Check out this link: ty4stroke.com/threads/phazer-reverse-issue.154999/ The 5th comment down from Mooseman has the tech bulletin. Read through that. The things I did are as follows and as long as the machine is warm the reverse shifts 99 percent of the time. 1st off it will NOT shift until the engine has warmed up and is no longer at high idle. 2nd I replaced the drive belt with the new belt with the updated part number. That takes some drag off the clutch to allow shifting. Check the secondary clutch spacing that it is correct and the new belt sits just at or above the edge of the secondary. Adjust with shims if needed. I also replaced the thick Yamalube gear oil in the chain case with Polaris SCL. It is fully synthetic and allows things to move easier when cold. This is what I did and it works great. Just go easy on it when shifting and you should be happy with it.

@289kyle 9 месяцев назад

Have you changed the coolant yet? Is there anything particular you need to do to ensure no air is trapped in the system?

@MiloFarms 9 месяцев назад

I changed the coolant when I got them. I found a low point in the coolant hose on the right of the machine near the exchanger and used a wet dry vac to suck all the coolant out. Then refilled with new. It purges the air out itself on these models. just keep the reservoir at the fill line for the first few rides. I found that regular 50/50 premix antifreeze works fine. We do not have extream cold here and 50/50 exchanges the heat better than 60/40 mix.

@289kyle 9 месяцев назад

Great, thanks for the info. I live in Washington State near the Canadian boarder, we get near zero a few times a year. I’m assuming the hose you used to drain the system is the main hose coming off of the bottom of the radiator?

@MiloFarms 9 месяцев назад

@@289kyle I cant remember for sure but any one of those lower 3/4 inch hoses would work. No matter what you can never get all the coolant out of the exchanger.

@289kyle 9 месяцев назад

Gotcha! I bought this 07 Phazer with (no joke) 110 miles on it. Not sure how much I “need” to dump the coolant since it hasn’t been ran much but figure it’s a good precaution.