Yamaha Raptor 660 Carburetor Complete Breakdown & How it Works (Informational)

Подписаться 6 тыс.

Просмотров 14 тыс.

50% 1

❤️THANKS for WATCHING! If this VIDEO saved you any TIME or MONEY, please consider supporting my efforts with a DONATION ➜ www.paypal.com/donate/?hosted...
PLEASE!!! Help My Channel Grow!
***********************************************************
⭐ Official Amazon Store ⭐
✅ www.amazon.com/shop/jackofall...
⭐ Official Amazon Associate ⭐
❤️ Purchase Through our AMAZON LINKS ❤️
✅ Tire Puncture Repair Kit (Best One!!!) ➜ amzn.to/48LjTT1
✅ New Carburetor Replacement For Yamaha Raptor 660 660R ➜ amzn.to/45nP7wJ
✅ Pit Posse PP2590 Carburetor Pilot Air Mixture Adjusting Tool ➜ amzn.to/3turFQY
⭐ Official eBay Partner⭐
As an Ebay Partner I earn from qualifying purchases
❤️ Purchase Through our eBay LINKS ❤️
☑️ Yamaha Raptor 660 YFM660R 2001-2005 Carb Rebuild Kit ➜ ebay.us/8Rbw8x
☑️ Genuine Mikuni Carb Kit 2001-2005 Yamaha Raptor 660 ➜ ebay.us/U291Nf
🔧WELCOME to JACK of all TRADES Dre RU-vid channel🔧
The videos on this channel are custom tailored for Everyday Life. We all know that things break throughout normal usage and most likely repair fees are astronomical. I take my time to create these videos for those specific situations. If anyone out there would like to support my channel by SUBSCRIBING or DONATING please feel free to do so. I greatly appreciate all the support through your Subscribing, Likes, and Positive Commenting. (Thank you all)
⭐ SUPPORT!! JACK of all TRADES Dre RU-vid Channel!! ⭐
👉🏽 Please CLICK that ➜ 👍🏽 Thumps Up Button 👍🏽
👉🏽 Please SUBSCRIBE ➜ / @joatd
👉🏽 DONATE ➜ www.paypal.com/donate/?hosted...
👉🏽 Please Share our URL ➜ / @joatd
❤️ All Positive Comments are WELCOME!! ❤️
⭐ DONATIONS receive a Cool Season Grass Calendar ⭐
✅ Place E-mail in the optional notes area (For Password)
👉🏽 DONATE ➜ www.paypal.com/donate/?hosted...
✅ FREE Calendar ➜ drive.google.com/file/d/1zrzA...
⭐ Men & Women HOODIES, T-SHIRTS, & HATS etc ⭐
👉🏽 J.O.A.T.D. Merch ➜ JOATD.myspreadshop.com/
⭐ Members-Only: Great PERKS! ⭐
👉🏽 Badges
👉🏽 Emojis: 😃,🤣,🤩
👉🏽 1st In-Line for replies to their Question?
👉🏽 Discounted Merchandise
👉🏽 Member shout-outs
❤️ help support the channel ❤️
✅ JOIN NOW!! 🤩 ➜ / @joatd
⭐ HELPFUL Download ⭐
☑️ MANUAL ➜ drive.google.com/file/d/1NKqy...
⭐You can also CONNECT with our channel HERE TOO!!⭐
✅ WEBSITE ➜ beacons.ai/joatd
✅ E-MAIL➜ jackofalltradesdre@gmail.com
✅ FACEBOOK ➜ / j.o.a.t.d.merch
✅ INSTAGRAM ➜ / jackofalltradesdre
✅ TIK-TOK ➜ www.tiktok.com/@user216716749...
💡If you have an idea or suggestion for a video
❤️ PLEASE LEAVE A COMMENT ❤️
⭐ VIDEO Description ⭐
I just wanted to share this video with you because there's not a lot of information on videos out there on the Mikuni Dual 33mm Constant Velocity (CV) Carburetor for the 2001 - 2005 Yamaha Raptor 660. Hope you like the video.
🛑 Warning!! Please Read 🛑
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not JACK of all TRADES Dre. Please ensure that you take all proper recommended safety measures before attempting any project. JACK of all TRADES Dre assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.

Авто/Мото

Опубликовано:

10 июл 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 60

@Cduncan04 Год назад

I was having carb issues with my 660. This man is amazing! Did exactly what he said and it made a world of difference! Thank you so much.

@JOATD Год назад

Thank you I'm glad that my video could help you

@victorrojas-parra3375 2 месяца назад

Thanks for the very detailed explanation of the Yamaha 660r Raptor duel carburetor

@InyoTim 3 месяца назад

Thanks for the video. Chainsaw mechanic but friend brought me this big carb to rebuild. Your help appreciated.

@JOATD 3 месяца назад

No problem I'm glad that I could help you

@ghostsquirrel1155 Год назад

Incredibly helpful fixed a problem I have been having for a min. Thank you

@JOATD Год назад

Thank you and it was no problem I'm glad that my video could help you

@AtAllCost 10 месяцев назад

Awesome video. Ready to rebuild my carb now 👍

@JOATD 10 месяцев назад

It's a little frustrating but take your time with it. It's always going to need a little tweaking that just comes with the carburetor. thank you and I'm glad that my video could help you.

@georgef286 Год назад

Excellent!!!!

@JOATD Год назад

Thank you I'm glad my video could help you

@urrutiamartin3066 11 месяцев назад

Really good explanation

@JOATD 11 месяцев назад

Thanks I'm glad that my video could help you.

@SamCam-pl9qc 4 месяца назад

Good instructor!!!

@JOATD 4 месяца назад

I'm glad my video could help you

@sabadabigarage1595 21 день назад

Great video. However one question Why is the starter jet responsible midway issues if it only to assist in starting?

@rubentherubicon 4 месяца назад

Very detailed video great job, the only thing I wish was added is how to remove the choke, I am having issues with my choke and figure out for the life of me how to remove and replace the choke cable, there seems to no video relating to this

@JOATD 4 месяца назад

Thank you ,Take a look around my channel I have numerous videos on lots of different things. How to remove throttle cable: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P0daC9W8eP0.htmlsi=c6fjJQt3kc_JRLZW

@victorrojas-parra3375 2 месяца назад

Low rev two turns out hight rev three turns out on the air mixer screw but what kind air filter u running and are you running full exhaust or slip on only. Sorry for all the questions I having issues at full throttle and I just found out my raptor missing air intake adapters n filters. The air box there

@realagentp_91 4 месяца назад

I got a 2001 660 raptor. And trouble shooting carb. I have fuel coming from and after peacock, but I have no fuel at float bowl? Appreciate any feedback

@user-pw2ej6np8f 2 месяца назад

Would anyone know what is making my 660 rev up when i hit the gas but it takes a min for the power to go to the wheels it just stays reved higher then usual

@todbrentholm5334 Год назад

👍👍👍

@JOATD Год назад

Thanks

@jamesbelt3117 10 месяцев назад

Did you rejet these aftermarket carbs for them to work , ive had no luck with mine

@JOATD 9 месяцев назад

The first Chinese carburetor I bought from Amazon work right out of the box. It was a little shaky had to tune it but it worked for a while. The next go-around I rejected it with a jet kit and it ran but nothing's better than the OEM carburetor. Apologies for the late response for some reason your comment was blocked and I didn't know until today.

@thotty2hotty530 Год назад

I just had a question the little needle thing connected to the floats, it sits in that hole is it suppose to move up and down freely when seated and if so what can I do so it does?

@JOATD Год назад

Yes the needle that's connected to the float is supposed to move up and down as fluid fills the leaves the float Bowl.

@luiscastaneda7996 5 месяцев назад

I had a question my quad 660 when I drive it half throttle is chokes but if I full throttle it works but to much power so do I need to adjust the left turn the left side with a flat head like 2 and a half or 3 is 3 turns more gas or less ?

@luiscastaneda7996 5 месяцев назад

And fyi I just installed a new carb but have not messed with it

@Jursaw Год назад

Great video! I am chasing a issue with my 2005 660. It backfires a lot on decel which i think means it is lean. It also will not start unless i have the choke on for about a minute then it will idle on its own but then randomly stall and i gotta restart it (no choke this time)

@JOATD Год назад

It's a couple of things that you need to look through. Make sure none of the boots have cracks in them. Make sure that the spark plug is new. If it's a carburetor issue it's very hard to diagnose. You basically have to play with the air fuel mixture and the Jet needle position until you get it right. Everybody's settings are going to be different it depends on how old your carburetor is and what type of modifications you have. It's just a trial and error thing. If you look in my descriptions I have some settings that you can start at

@JOATD Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-efkt_7_4p4E.html Check out the descriptions all the way at the bottom maybe it can help

@Jursaw Год назад

@@JOATD Thank you! I cleaned the carb out before but I will do it again. Going to throw a new plug in there and adjust the needle clip position. The machine has stock intake and exhaust. I am going to check what jet sizes are installed. Has original carb as well

@JOATD Год назад

@@Jursaw yeah man it's crazy it's because it has that two carbs set up it makes it hard to tune it

@Jursaw Год назад

@@JOATD found my issue, low compression due to excessive ring end gap! New piston kit and gaskets on order

@thotty2hotty530 Год назад

I got a question I took my carb apart and was just cleaning it, I barely turned the left air/gas mixture screw cuz I thought maybe that’s why it wanted to die when idling, when I put it all back together it won’t even start now it tries but just can’t is it cause I turned that screw?

@thotty2hotty530 Год назад

I’ll most likely put it back to normal in the morning it’s just to late right now and am too tired

@JOATD Год назад

@@thotty2hotty530 if it was the left screw yes the left screw controls the idle. If you don't remember how much you turned the screw turn it all the way back down to tight and turn it back out 2 or 3 Turns. If you count how many turns it takes to tighten the opposite side you will know how many turns you need for the side that has the issue. Just make sure you count correctly

@thotty2hotty530 Год назад

@@JOATD yes sir did that and now it fires up right away thank you

@raffromeo18 Год назад

Does screwing the air mixture needle in richen or lean the mixture

@JOATD Год назад

Yes

@raffromeo18 Год назад

Which way is which

@JOATD Год назад

If you are on the left side of your bike turning it to the right is opening it turning it to the left is clothing it. Remember to turn it to the left and count how many full turns it takes to fully close it so if you mess up you always know from a closed position the original setting

@raffromeo18 Год назад

Yea so when the screw goes into the carb it leans the mixture and when it’s unscrewed it richens it

@JOATD Год назад

@@raffromeo18 yes turning the screw in makes it lean turning it out makes it rich

@Kevin_Yagoonie Год назад

How did these carbs work out? Any issues running them?

@JOATD Год назад

I'm going to be honest with you it took a little bit but I got it to run but I had to reject the whole thing take a look at my descriptions I have a lot of info in there

@Kevin_Yagoonie Год назад

@@JOATD my 05 raptor 660 has a full pro circuit exhaust and k&n open box filter. I'm going with Dynojet 146/148 and a #25 pilot. What turns would you suggest on the left & right air/fuel screws?

@JOATD Год назад

@YaGoonie 5.3 take a look at the bottom of this page at (my suggestions) in the descriptions area I was starting at 2 on the left two on the right or two on the left two and a half on the right. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-efkt_7_4p4E.html

@KrustyQuad Год назад

Are you saying that the fuel screw on one carb effects high rpm and the other one low rpm?

@JOATD Год назад

Correct

@KrustyQuad Год назад

@JACK of all TRADES Dre how can that be correct? at partial throttle the venturi effect is pulling fuel up the main jet , therefore partial throttle fueling is controlled by the needle position and the mainjet size? not arguing , just wondering

@JOATD Год назад

The left carb is the primary carb and supplys the mixture up to about 1/2 throttle, where the right (secondary) carb starts to open and supply its mixture WITH the primary carb. This allows 2 smaller venturi carbs to combine to = 1 large carb when wide open. A smaller venturi = higher velocity/vacuum through the carb, meaning better fuel atomization and throttle response and, as opposed to a single larger carb with less venturi effect (velocity/vacuum) which will cause poor fuel atomization/ throttle response. No they are not syncronized. They require different jetting because they have different resposibilities in respect to throttle opening AND have some overlap in operation. Essentially you have a 2 barrel carburetor. You should be able to feel it when the secondary carb. starts to deliver its mixture.

@JOATD Год назад

I did not read your question correctly I apologize.

@KrustyQuad Год назад

@JACK of all TRADES Dre Are you sure that correct? The raptor 660 is running 2 carbs with 2 separate inlets. They feed into 2 separate runners in the head with 1 feeding 2 valves and the other feeding 1 valve. I don't see how the airfuel screws in either carb effects anything but idle.. I thought one is jetted differently that the other because it's feeding 2 valves vs the other feeding 1 valve ....