Yamaha Vino 125 CVT Parts Removal - variator, rollers, belt, clutch | Mitch's Scooter Stuff

Подписаться 110 тыс.

Просмотров 18 тыс.

50% 1

In this video I am going to show you how to remove CVT cover and parts without draining the engine oil on Yamaha Vino 125cc scooter.
** Tools I used in this video **
17mm open wrench - amzn.to/2GKqFL4
Phillips #2 screwdriver - amzn.to/2fgdZDL
Breaker bar 1/2 drive - amzn.to/2HenuMI
Ratchet 3/8 drive - amzn.to/2hhmnUs
3" / 6” extension set 3/8 drive - amzn.to/2h7ypMl
6mm allen socket 3/8 drive - amzn.to/2ELCnbU
5mm allen socket 3/8 drive - amzn.to/2ofCuCg
22mm socket 1/2 drive - amzn.to/3aHoJ64
19mm socket 3/8 drive - amzn.to/2CiXNqo
1/2 to 3/8 drive socket adapter - amzn.to/2EqLzQm
Variator / Clutch holder tool - amzn.to/2ZuYJEA
Little oil pan / large jug lid
Towel
Velcro strap
Concrete block
Want more free Scooter Tip / Tutorial videos - Help support this channel!
Paypal donation: bit.ly/PayPalMitchsScooterStuff
** Help translate my videos to your language HERE **
bit.ly/ADDYOURLANGUAGE
** Shop all the scooter tools and gear I use HERE **
bit.ly/MitchsScooterStuffSHOP
Follow Mitch's Scooter Stuff:
Website - bit.ly/Scooteronly
Instagram - bit.ly/2fB8gay
Facebook - bit.ly/2gEsYpt
My other RU-vid channel - bit.ly/2g4i5d5
Filmed by Mitch Bergsma
Edited on Final Cut Pro X on Mac
Scooter Intro edit by Erik Lauritzen
Check out his websites: bit.ly/2gQe8d4
#MitchsScooterStuffYamahaVino125 #MitchsScooterStuff #YamahaVino125
Like the music? Check out this great library for RU-vid videos here:
bit.ly/MICTUNES (try it for FREE!)
******************************************************
IMPORTANT
Please only use and share this embed code of the original video.
Third party downloads and distribution is not permitted.
If you are interested in buying footage or for booking information please contact: hire.micbergsma@gmail.com
******************************************************
About Mitch's Scooter Stuff:
This channel is all about scooters! Tutorials, How to, DIY Maintenance, Reviews, Mods, Vlogs, Just for Fun, and more!
Yamaha Vino 125 CVT Parts Removal - variator, rollers, belt, clutch | Mitch's Scooter Stuff
• Video
Mitch's Scooter Stuff
/ mitchsscooterstuff

Авто/Мото

Опубликовано:

19 авг 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@MitchsScooterStuff 3 года назад

*** Tools I used in this video *** 17mm open wrench - amzn.to/2GKqFL4 Phillips #2 screwdriver - amzn.to/2fgdZDL Breaker bar 1/2 drive - amzn.to/2HenuMI Ratchet 3/8 drive - amzn.to/2hhmnUs 3" / 6” extension set 3/8 drive - amzn.to/2h7ypMl 6mm allen socket 3/8 drive - amzn.to/2ELCnbU 5mm allen socket 3/8 drive - amzn.to/2ofCuCg 22mm socket 1/2 drive - amzn.to/3aHoJ64 19mm socket 3/8 drive - amzn.to/2CiXNqo 1/2 to 3/8 drive socket adapter - amzn.to/2EqLzQm Variator / Clutch holder tool - amzn.to/2ZuYJEA Little oil pan / large jug lid Towel Velcro strap Concrete block

@rosewell1983 3 года назад

Tools i used watching this video: PC Cookies from dominos Pepsi Max

@MrSakamotothecat Год назад

Very professional grade everything was placed in order, no music, no chicken talk, but real work. Thanks man that was awesome 👍

@TheTojocat 3 года назад

I dont own a scooter, im far to large a man to ever think of getting one, its funny what you find interesting to watch on youtube, i love watching this guys vids on scooter repair.

@coltoncolton3382 3 года назад

Keep up the vino 125 vids!!!

@MitchsScooterStuff 3 года назад

Will do! More coming!

@petesanrafs3513 3 года назад

Excellent video! I have a vino 125 and while I'm mechanically inclined it's nice to see what I'm getting into first. I love the fact that I'm not trying to fight through music and other BS. Everything is shown but boring parts are sped up. Perfect editing!!!

@MitchsScooterStuff 3 года назад

😄👍🏼👍🏼

@barrymcglynn9677 Год назад

Love the way you show everything in detail. I've never seen anyone do it so well, without a word. I'm hooked, Bro!

@bardenheier 3 года назад

I got a vino like the very beginning of the year and your videos have helped me so much.. I most recently had my drive belt brake and this video was super helpful on how to get to it.. Thank you so much sir!!

@MitchsScooterStuff 3 года назад

Great to hear! Happy to help! More videos coming soon!

@CruisingOz 3 года назад

Thanks Mitch. Big help as always. I hadn't thought of simply leaning my Vino to avoid the oil spill, and only opened up the CVT case when I have done oil changes. It is kind of obvious now that I have seen it done.

@MitchsScooterStuff 3 года назад

No problem 👍🏼👍🏼

@Jonathan-yk2mx 3 года назад

For a guy that does scooter repair I am amazed at the patience he has using all hand tools. I would freak out taking all those bolts out. You always hear an impact driver when I'm removing bolts on my cvt cover lol.

@MitchsScooterStuff 3 года назад

😆👍🏼👍🏼

@jimalcantara6638 3 года назад

Autozone will loan out the clutch holding tool.

@fv7765 3 года назад

I owned a Suzuki CS50 1982 Spray into sky blue from navy, I don't have a CVT but a wet centrifugal clutch less to service than the CVT. A great video!

@MitchsScooterStuff 3 года назад

😄🤙🏼🤙🏼

@abumuhammad6923 3 года назад

Tanks for your help from Morocco 🇲🇦👍

@michaelb.42112 5 месяцев назад

This is so great !!!!!

@MitchsScooterStuff 5 месяцев назад

😄🤙🏼🤙🏼

@barneykennett9282 3 года назад

Excellent...👍.

@MitchsScooterStuff 3 года назад

Thank you! Cheers!

@natsuyama3154 2 года назад

Very COLD Job-♡

@masont1527 3 года назад

When you put everything back together, did you have to replace the gasket for cvt cover?

@mytype181 3 года назад

@Mitch's Scooter Stuff Do you have any advice on removing a gas cap from a 2007 Vino 125? It's been sitting for over 4yrs. Key turns it, but it's not releasing. Thanks, and thanks for the the great vids.

@rdevertconn 3 года назад

I have a Vino 125, you must line up arrows. Look closer for arrows.

@1WEEBLE1 3 года назад

👍👍👍👍👊👊👊👊 great as usual

@MitchsScooterStuff 3 года назад

Thank you! Cheers!

@jimalcantara6638 2 года назад

Mitch - do you have a video where you service the rear pulley assembly?

@MitchsScooterStuff 2 года назад

Ah yes I forgot about that... thanks for reminding me... I will edit that video asap

@nithinraj7351 3 года назад

Heyyy our buddy is back again............Hey mitch 😀🖐️ how are you? Hope ur doing fine...

@MitchsScooterStuff 3 года назад

Welcome back! Good and busy, hope you are doing good! 😄🤙🏼

@he_90i56 3 года назад

💝

@christophershanz498 2 года назад

Will I need a new cat gasket to do this

@AO-eo5xd 2 года назад

where can I find the roller weights?

@DmiA 3 года назад

Hi Mitch! If i remove washer on 4:56 top speed will be rise a little, right?

@MitchsScooterStuff 3 года назад

probably but I am not too sure.. I don't want to risk it

@charlestremblay1584 11 месяцев назад

did it work?

@ujangkemon73 3 года назад

i have one fino from yamaha indonesia

@MitchsScooterStuff 3 года назад

Cool!! 😎

@Rebar160 3 года назад

How many scooters do you have?

@MitchsScooterStuff 3 года назад

Hmm I think 13.... some here in Hawaii, some in Washington State, and some in Texas

@mikeythellama 3 года назад

@@MitchsScooterStuff if you're ever back in texas you should do a meetup and group ride with fans.

@edhok78 3 года назад

@Mitch's Scooter Stuff, nice video, thanks for sharing, i have a burgman 400 '08 model, will that variator/clutch holder work on my burgman?thanks

@MitchsScooterStuff 3 года назад

mikeythellama yes I would love to! I hope I could visit Texas next year and my friend can let me ride her Vespa GTS300 or other friend with Honda reflex 250😄🤙🏼

@MitchsScooterStuff 3 года назад

fred dingl thank you Fred! Yes! I use same one for my burgman! Link in pinned comment and description where to get one 👍🏼

@jamesallen7259 3 года назад

Good 50cc starter scooter brand ?

@MitchsScooterStuff 3 года назад

Yamaha, Honda, Kymco, Sym, Genuine, Piaggio, Vespa, Aprilia.... Japanese and Italian are so good

@jamesallen7259 3 года назад

@@MitchsScooterStuff I got a 2007 Honda Metropolitan

@MitchsScooterStuff 3 года назад

@@jamesallen7259 very good!!

@jamesallen7259 3 года назад

@@MitchsScooterStuff thank you Mitch. You have inspired me.

@SkateSpace2012 3 года назад

Why opening? everything looks good, just demonstration how to open?

@MitchsScooterStuff 3 года назад

I opened it to replace with Dr Pulley Sliders and inspected everything to make sure all are under the service limit. 4,500 miles on it. Drive belt is still original so best to check to make sure there are no cracks on it

@drucifer180 3 года назад

@@MitchsScooterStuff where can I find the Dr Pully Sliders? Did it increase performance, acceleration, or speed? My Vino has been really sluggish lately, cleaned the carb and have a new air filter on the way. What else do you recommend checking?