Тёмный
No video :(

You NEED These Tools If You Own A BMW E36/E46 

Pawinning
Подписаться 29 тыс.
Просмотров 20 тыс.
50% 1

If you are an BMW E36/E46 owner or just purchased one, this video covers all the tools that I used to maintain and build my 1995 BMW 325ic (M50B25tu engine). The great thing about this set of BMW E36 tools is that there are not a lot of specialty tools you need, but I thought I'd add in the other useful tools I've purchase throughout the entire Turbo Build. Feel free to comment any tools you'd recommend!
🛠𝗕𝗨𝗜𝗟𝗗 𝗧𝗢𝗢𝗟𝗦💸 --- I made a list for most, if not all the tools covered in this video on Amazon: bit.ly/BMWE36_T...
Direct links to similar tools mentioned in this video:
-Hanes BMW E36 Maintainence Manual: amzn.to/2IQnXVE
-Bentley BMW E36 Maintainence Manual: amzn.to/2DVvG1F
-Female Torx Socket Set: amzn.to/2GQp0Dp
-Hex Socket Set: amzn.to/2kpijiM
-Torx Socket Set: amzn.to/2KVrItM
-Really Long 3/8 to 1/2 Extension: amzn.to/2KVs4AC
-Scanner tool: (generic there are so many out there that can work)
-Flare nut wrench set: amzn.to/2Lwy0kn
-Cutter for brake hard lines: amzn.to/2KXf1yH
-MacPherson Strut Spring Compressor: amzn.to/2xdZKqV
-E36 Fan Wrench and Water Pump locking Tool: amzn.to/2koVdJ7
-Oxygen sensor socket set: amzn.to/2Lw1Ntv
-E36 Timing Blocks, Vanos Sprocket Tool, Flywheel Lock Pin (4 cylinder engines use different timing blocks): amzn.to/2EbMqW6
-E36 Clearanced Head Bolt Socket: amzn.to/2s6i7JG
-Other Vanos Tools (shaved sockets and other tools): www.beisansystems.com
-Pick tools: amzn.to/2KQRcsb
-VANOS Air Fitting Tool: amzn.to/2Lv1grO
-E36 Clutch Alignment tool: (comes with clutch)
🔩Other Useful Tool Links:
-Craftsman 1/2" Electric Impact Wrench: amzn.to/2I3LTnK
-Electric 3/8" Impact Wrench: amzn.to/2GsluCR
-90-degree drill bit: amzn.to/2ktdZz4'
-Dremel toolkit: amzn.to/2IMiqPV
-Thread pitch gauge: amzn.to/2IRslnD
-Go-through socket set: amzn.to/2xaIwek
-Measuring calipers: amzn.to/2KVddWC
-Manual vacuum pump: amzn.to/2IONgve
-Bearing puller kit: amzn.to/2KUjnX2
🔧ALL THE PARTS IN MY TURBO BMW E36 (Link)🔧: bit.ly/E36Part...
~~My Camera Gear~~
Go Pro Hero 7: amzn.to/2QEemqx
Sony A6500: amzn.to/34O02E4
Lavalier Lapel Mic: amzn.to/2QG6AfM
Audio Recorder: amzn.to/2YJ5x3h
► Basic DIY Tools ◄
→ Trim Removal Tools: amzn.to/3aPEFD8
→ Low-Profile Car Jack I use: amzn.to/38LY0Dh
→ Don't Forget About Jack Stands: amzn.to/2t7eTcz
→ Handy Service Ramp: amzn.to/38Qz4e3
→ Basic Tool Kit: amzn.to/37Cobfp
-------------------------------------------------------------------------------------------------------------
If you have any questions/inquiries, contact me via private messaging on social media:
INSTAGRAM: @powow66
RU-vid: / pawinning
Music in this video is provided by Epidemic Sound: www.epidemicsound.com
Affiliate disclaimer: This video description may contain affiliate links from which I get paid a commission if a purchase is made. I only endorse products I've used/enjoyed or received excellent feedback from. In general, I endorse products without the expectation of any compensation, and I will never recommend a product if I have concerns with end user satisfaction.
#pawinning #e36projectcar #diycarmods #cartools #Gertie36 #turboe36 #e36projectcar #turbom50 #pawinnsong #bmw #325i #turbobuild #diycarmods

Опубликовано:

 

29 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 67   
@zeidakiss
@zeidakiss 5 лет назад
Great arsenal. Few items I use all the time: magnetic parts tray, service cart, telescopic mirror, telescopic magnet, headlight, torque wrench.
@Pawinning
@Pawinning 5 лет назад
Thank you! And thanks for your input 🙏
@GuardianMB
@GuardianMB Год назад
You are AWESOME!!! Thank you so much for sharing your amazing expertise!
@10Mrfifa
@10Mrfifa 6 лет назад
Im gonna buy a bmw e36 soon as my first car i hope i can learn something from your videos i appreciate you make them because i dont know so much about it but im very excited to learn new things cause i love the e36
@Pawinning
@Pawinning 6 лет назад
I'm happy to help! Thank you for your support, I'm glad my content gets you motivated for your own e36 mods :)
@JoshMoshh
@JoshMoshh 6 лет назад
Love the time your putting into documenting the overlooked details of a build. Would like to see more about the tune and ECU
@Pawinning
@Pawinning 6 лет назад
Thank you, and that’s a great suggestion. It should align perfectly with my plans to get a standalone ecu
@olu
@olu 6 лет назад
E36 is looking great back there 💪🔥
@Pawinning
@Pawinning 6 лет назад
Thanks man 😎
@gespinal0301
@gespinal0301 6 лет назад
I binged watched your content about 2 weeks ago and the quality of your videos is really good! Keep up the great work!
@Pawinning
@Pawinning 6 лет назад
Thank you for checking out all my work! I’m glad you enjoyed it. Will do!
@mrsam5350
@mrsam5350 3 года назад
Hey Pawinning it would be great if you made some more videos, always great helpful easy to watch content 👍
@DoctaM3
@DoctaM3 6 лет назад
Its amazing to see how far you have come with this project! Kudos man.
@Pawinning
@Pawinning 6 лет назад
Thanks man 😌, hoping to bring it to PA one day!
@DoctaM3
@DoctaM3 6 лет назад
PVGP in July 2018. Let's GO!
@MrNicoe36cabrio
@MrNicoe36cabrio 6 лет назад
Very nice. That's a very complete collection Pawinn. And I learned a lot of the "mybimmerspace" guy . It's a pitty he stopped making videos. He was a very good and one of the first bmw diy engine youtuber in the past...He inspired me to do the vanos job as a non-mechanic!! The vanos tool set is very handy indeed. I bought it in the UK and it was about $200 indeed. Actually a Milwaukee is on my wishlist, they're super handy. But they are fairly expensive in Europe....Keep up the good work!! Best Dutch regards.
@Pawinning
@Pawinning 6 лет назад
Thanks man! And I agree mybimmerspace was very good at explaining mechanics at a good pace for new enthusiasts. It is a shame he’s stopped making videos. Great that you agree with the handiness of the vanos tools!
@Pawinning
@Pawinning 6 лет назад
And will do :)
@gustavopavlini480
@gustavopavlini480 4 года назад
Man. Goood content. And i love the way you tell everything and how clear you explain. You might be wrong sometimes. But you are not mechanic nor am i. But we learn. Thats what we do. We never were born as mechanics. Btw just got my e36 328i gold colour. But got a lot of things to do. To all who wanna buy e36. Its soo good. I myself prefer e36. But i do love e46 too. Yet e36 is my choice. Its calssic fast enough and good at handling the road.
@rafaelmota7670
@rafaelmota7670 6 лет назад
Esse carro é um sonho! Parabéns @pawinning Saudações do brasil!! 🚘
@BimmerDude
@BimmerDude 6 лет назад
Great video man! I have those same manual's i swear LOL Cars looking fire btw that color really works on it. Im currently having mine painted.. i dunno why but black although it looks good just doesnt really do these car justice on film great choice
@Pawinning
@Pawinning 6 лет назад
Thanks man!!! I’m very happy with the way it turned out, and wow I hope your paint comes out beautiful 😎! I agree Black is hard to get right on film, a solid color brings out the nice curves/angles of the e36 👌
@booluinji7298
@booluinji7298 6 лет назад
About time my good sir!!! Awesome stuff as always.
@Pawinning
@Pawinning 6 лет назад
Thank you :)
@BMkeys14
@BMkeys14 4 года назад
Not just for the E36/E46, you'll need most of the tools for any BMW. I use most of these on my E28.
@Pawinning
@Pawinning 4 года назад
Thanks for the feedback 🙏! Happy to hear that these would apply for other platforms too
@stevenstratford137
@stevenstratford137 5 лет назад
Nice one,just what I was looking for.thank you!.
@Pawinning
@Pawinning 5 лет назад
I'm glad it helped you out 🙏
@M3NACE
@M3NACE 6 лет назад
nice bro! solid vid.
@Pawinning
@Pawinning 6 лет назад
Thanks man!!
@Nico_335i_DCT
@Nico_335i_DCT 6 лет назад
Awesome as every time👌
@Pawinning
@Pawinning 6 лет назад
Thank you 🙏
@hutboston
@hutboston 6 лет назад
Love the Evelast Inverter. We'll definitely gonna put that to good use bro. ;))
@white-ranger918
@white-ranger918 5 лет назад
I am also an Asian with an e36, a nice tool box and an e36 user manual that my dad bought me. I have the same hair cut too...
@drifttandemz526
@drifttandemz526 5 лет назад
me too, was a 240 guy but got into lik'n them bimmerz lol
@white-ranger918
@white-ranger918 5 лет назад
@@drifttandemz526 small world
@becomematrix
@becomematrix 6 лет назад
Bentley 👍🏼👍🏼
@yassersaad2946
@yassersaad2946 3 года назад
Thanks for your time sir may I ask you how can I know any tourq spects on any car i am working on
@Pawinning
@Pawinning 3 года назад
Most torque specs I reference are in the Bentley repair manual 👍.
@muumin1nja870
@muumin1nja870 6 лет назад
Hey, great video as always! Have you used the INPA software for diagnostics or activating individual components as well?
@Pawinning
@Pawinning 6 лет назад
Thanks man! I’ve only ever seen it used once, but I’ve never used it personally. What are u looking for with that diagnostic interface?
@muumin1nja870
@muumin1nja870 6 лет назад
Do you remember if that was on a OBD1 E36 or something newer? I can't access my ABS module with Carsoft 6.5. Funnily enough, trying to communicate with the module somehow cleared the fault code that was in there and it hasn't returned yet. But I've heard that INPA goes into every detail, showing things like individual cylinder misfires and besides diagnostics, actually allowing you to test individual fuel injection valves etc.
@cmservtec2968
@cmservtec2968 6 лет назад
I´m trying to do the same...U need an old laptop with Serial port, the INPA SW and this: openlabs.co/projects/Tiny-ADS-Interface Also some patience ;)
@muumin1nja870
@muumin1nja870 6 лет назад
Thanks man, gonna give it a try :)
@tequilandtacos
@tequilandtacos Год назад
I had a question, would you rather buy all these tools VS the Sunex Master Hex Set that seemns to cover almost everything ?
@jerka9
@jerka9 6 лет назад
Good stuff, liked and subscribed! Graduating my mech.eng in about 10 days and thinking about turboconverting my e36 320 with the m52 engine. Do u think the alu block will be able to handle the heat and abuse?
@Pawinning
@Pawinning 6 лет назад
Thanks man! And congrats on your graduation, we’re both ME nerds ✌️. But yes I believe you should be fine, just beef up your cooling system and get both the block and head decked as fine as you can
@PadmaDorjee
@PadmaDorjee 3 года назад
Hey Man, would you ever considering upgrading to an E46 project? Also, what wheels do you have?
@matthewgutierrez3865
@matthewgutierrez3865 2 года назад
Hey pawinning I was wondering if you could make a video of the Bavarian autosport obd1 diognosis tool cause I bought one and don't know how to use it on my e36 I have a 1992 can you please help me thanks man
@SRER5627
@SRER5627 6 лет назад
Hey, love the channel! You’re really thorough and informative. I was wondering if you’ve had any experience with your mls gasket pre turbo? I was going to install an mls gasket and arp studs after I refresh the head of my m50 before I install the turbo kit, and I was wondering how bad the lower compression would negatively effect N/A performance. Thanks!
@Pawinning
@Pawinning 6 лет назад
You should be able to choose the thickness of the MLS gasket you desire. Just consider how much off the head you might be grinding off with resurfacing to establish approximately the new thickness you’ll need. And then with some tuning and other refreshed components the car should perform well!
@ryancampbell1628
@ryancampbell1628 4 года назад
Any chance you still have this car or are still in contact with Brody from miller
@frontspring1
@frontspring1 6 лет назад
hey pawning how much boost you pushing?
@iDreaMzDK
@iDreaMzDK 6 лет назад
Nice video Pawinning, keep it up! I got one question regarding the Supra build (When does it start?) :P Looking forward to it!
@Pawinning
@Pawinning 6 лет назад
We’re still waiting on parts for the Supra! Eddie is taking time to save up and buy as much as we can to prepare for a dedicated build series. Hopefully within the next month we’ll start filming all the content
@iDreaMzDK
@iDreaMzDK 6 лет назад
Sounds awesome! Cant wait... Good luck! :)
@Projectchasingthewild
@Projectchasingthewild 5 лет назад
What kind of everlast tig welder?
@Portcitysteezy
@Portcitysteezy 4 года назад
Hey bro sweet e36 i also live in the massachusettes area and i also vlog, i have a r32 sedan and a k swapped hatch, you have a facebook by any chance i have some questions
@dermitdemgroen2985
@dermitdemgroen2985 6 лет назад
Hey pawinn! If I have a Girl like megan fox one day, would you change her against your e36? Peace and love!:D
@Pawinning
@Pawinning 6 лет назад
Hell nah, work hard to get both the woman of your dreams and a life worth living 😎👌
@Peaceinlove1432
@Peaceinlove1432 5 лет назад
👌👌👌👌👌
@Stockinger01
@Stockinger01 4 года назад
👍🏻✌🏻✌🏻✌🏻
@Pawinning
@Pawinning 4 года назад
🙏🙏🙏🤘
Далее
BMW Mechanic Tools YOU Need To Repair Your BMW
20:29
MUST HAVE Automotive DIY Tools
14:28
Просмотров 9 тыс.
Oh No! My Doll Fell In The Dirt🤧💩
00:17
Просмотров 12 млн
FIRST things to do when BUYING a BMW e46
8:03
Просмотров 79 тыс.
TOOLS I USED AS A BMW FLAT RATE MECHANIC (2020)
26:43
Stranded In A $600 BMW E36 With A Blown Head Gasket!
16:20
10 Must-Have Tools for Home BMW Mechanics
10:19
Просмотров 25 тыс.
WILL THE 8HP TRANSMISSION WORK IN A DRIFT CAR?
17:39
Просмотров 21 тыс.
E36 Z3 Rack Swap and Chasebays Power Steering KIT DIY
19:17
E36 M3 GETS NEW DIFF AND SUBFRAME BUSHINGS!
13:23
Просмотров 40 тыс.