Тёмный

Your Bicycle Wheel don't Move. How To Maintenance Bike Freehub 

Nice Bike Service
Подписаться 44 тыс.
Просмотров 266 тыс.
50% 1

Hello cyclists !
Bicycle wheel don't move. In this video tutorial, I will show you useful information.
How to remove a bike freehub body on a bike wheel.
You will see a lot of tricks that used in the bicycle workshop.
One of them is a magnet. With help magnet You won't lose the bearings.
Bike Freehub SHIMANO FH-RM30. This is a very popular bushing. Inside, it has a classic design, Very common on bikes.
The result of such dirt is riding in wet weather, when dirt gets on the hub, rain, snow or slush.
How to clean a bike freehub body. It is very important to clean everything perfectly!
Dirt should not remain. Take this maximum attention. Watch the video to the end so that you know all the subtleties of this bicycle hub maintenance.
How to degrease a bike freehub body. We use isopropyl alcohol for cleaning.
Then use wet wipes as well as dry wipes. The bicycle hub must be perfectly clean, before installing it back.
Need to lubricate the seats for doggie frivilla bicycle hub.
How to lube a bicycle freehub body. This grease is sticky, it will not only lubricate,
and also to help establish small balls (bearings) to their seats.
Now I will show you how quickly and easily qualitatively, you can clean the bearing balls.
We sprinkle isopropyl alcohol and wipe them with a dry cloth in the palm of your hand.
Then pour the balls into a clean container. The next trick is how easy and fast fill the balls into seats.
How do you like this life hack? Write in the comments) Install a bicycle freehub body on a bike wheel.
We collect everything in reverse order. Let's not forget the extra details.
Top lock nut, screwed against clockwise, do not miss this moment! Now it's different! Testing bike freehub after maintenance.
Thank you for watching! Necessarily. Put likes! subscribe to the channel
Don't miss our other video tutorials! Good luck!
DIY with ASMR
#workshop #asmr #bicycle
00:00 Bicycle wheel don't move
00:32 How to remove a bike freehub body on a bike wheel
01:03 Freehub shimano fh-rm30
01:44 How to clean a bike freehub body
02:30 How to degrease a bike freehub body
03:55 How to lube a bicycle freehub body
05:43 Install a bicycle freehub body on a bike wheel
07:51 Testing bike freehub after maintenance
🆗🎥🚲
Write in the comments, what you would like me to do in the new video.
❓❔❓
Ask your questions in the comments
👇👇👇

Наука

Опубликовано:

 

5 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 149   
@NiceBikeService
@NiceBikeService 3 месяца назад
❤ If you liked this video, 🙏 share this video with your friends 📈 it will help the development of the channel! ❓ ask your questions
@kv7005
@kv7005 Год назад
Attention to detail is great. You made me smile with your bearing installer. Put a patent on that.😊
@JV_BMX
@JV_BMX Год назад
You deserve more subs, seeing a bike video like this is satisfying. Keep it up 👍
@Timjacobs44
@Timjacobs44 Год назад
Very good job, i like your channel 👍
@radosawdrewidzki8732
@radosawdrewidzki8732 Год назад
Dobra Robota precyzja Pozdrawiam serdecznie Poland
@fernglez60
@fernglez60 8 месяцев назад
Great video, thank you!
@NiceBikeService
@NiceBikeService 8 месяцев назад
Thank you for your feedback! 😘 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
@triggergr5717
@triggergr5717 Год назад
good work
@hudsonjosehudsonjose4895
@hudsonjosehudsonjose4895 Год назад
Top de mais 👏🏻👏🏻👏🏻👏🏻
@user-si5ef8do8w
@user-si5ef8do8w Год назад
뒷바퀴 허브는 보통 몇km타면 전체 청소해 주나요?? wd40 을 자주 뿌려줘도 문제일까요??
@playonkorg
@playonkorg Год назад
Very small point, never work with paper cleaning wipes in the mechanics, risk of residual material. Cloth wipes are cleaner work.Other than that, nice vid, I'm going to follow this one to solve my problem.
@makantahi3731
@makantahi3731 5 месяцев назад
06:04 i can't see the layout of the washers, but the thickest washer must be at the bottom, because if the thinnest one is at the bottom, it can deform and block the sprogs, which happened to me once
@NiceBikeService
@NiceBikeService 5 месяцев назад
thanks for the advice ! 😘
@startgames100
@startgames100 Год назад
Qual o produto que você usa para tirar graxa esse spray?
@user-lj5qh9ku8d
@user-lj5qh9ku8d Год назад
Дякую за цікавий контент, чи підійде для очищення засіб для очистки гальм авто і яке мастило порекомендуєте, дякую
@mateusfontenelle1794
@mateusfontenelle1794 Год назад
Belo vídeo de manutenção! Qual cubo é melhor, com esferas ou rolamentos? (pouca manutenção)
@eliasnap
@eliasnap 3 месяца назад
Rolamento é melhor, da menos problema
@xcel...1214
@xcel...1214 Год назад
Mantep 👍👍👍
@maximilianlucacel6326
@maximilianlucacel6326 Год назад
Te salut! Ce vaselină folosești/recomanzi?
@alexcheck6
@alexcheck6 Год назад
Все круто показано, але я єдине що не зрозуміло, чому не була змазана зубчатка касети, вона ж не має працювати на суху, треба хоча б пару капель масла для неї.
@user-nf7tt8ym7u
@user-nf7tt8ym7u 11 месяцев назад
사장님이 쓰시는 그런 묽은 구리스는 어디서 구입할 수 있나요.
@user-yq6bu2pg4j
@user-yq6bu2pg4j 11 месяцев назад
what kind of head is needed to remove the drum ?
@Viralwebus007us
@Viralwebus007us Год назад
Thanks Can u put links for purchasing the magnet attracting tools ! N others tools used ?! Thanks
@r0ns0n0l
@r0ns0n0l 3 месяца назад
he should have De -Magnetize the bearings before reinstalling! no good... becuz that will prolly cause damage in the future...
@abdellahzaidi1257
@abdellahzaidi1257 8 месяцев назад
thank you for the video 🌴🌴🌸🌸 minute 07:08. aim counter clock wise, not clock wise....
@NiceBikeService
@NiceBikeService 8 месяцев назад
Thank you for your feedback! 😘
@kacperkaniewski945
@kacperkaniewski945 Год назад
Jakiego smaru używasz
@user-gd9fy2zh2r
@user-gd9fy2zh2r 6 месяцев назад
Nice Video. Can you name the tool that you use for unfixing the freewheel body?
@NiceBikeService
@NiceBikeService 6 месяцев назад
Thank you! His instrument doesn't have a name. Google it exactly as you wrote to me and I think you will find such a tool.
@simonetorrini8106
@simonetorrini8106 Год назад
Ottimo video, molto utile. Poi darmi indicazioni sul modello di chiave che hai usato, non riesco a trovala
@simonetorrini8106
@simonetorrini8106 Год назад
Grazie
@Happy-1522
@Happy-1522 3 месяца назад
Yo tengo una maza shimano fh-tx505 pero no truena nada por que motivo sera ...?
@ataksnajpera
@ataksnajpera Год назад
5:51 - Ciekawe dlaczego shimano stosuje tylko dwie zapadki zamiast np. trzech? Trochę dziwnie to wygląda. Za duże straty energii? Za duży hałas?
@robertmcfadyen9156
@robertmcfadyen9156 Год назад
@@NiceBikeService You meant ,"THREE AND FOUR PAWL VERSIONS EQUISPACED" .
@angrylamo
@angrylamo 10 месяцев назад
What is the needle on your syringe? Nice stuff.
@NiceBikeService
@NiceBikeService 10 месяцев назад
This is a nozzle for flux or glue. You can find them in electronic component stores and on Chinese marketplaces
@MORTEF8
@MORTEF8 2 месяца назад
フリーハブ本体=ボディは外してないね。例えば3:04で映っているのは中子(なかご)というパーツで、ボディ本体は例えば4:01でグリスを縫っているほうのカタマリだよ。大きな六角レンチと専用工具でボディを外し、ハブバレルとハブシャフトまでばらしてメンテナンスする。タイトルは、スプロケットのフリー回転が渋いときの簡易メンテナンス方法 が正確だね。
@NiceBikeService
@NiceBikeService 2 месяца назад
コメントありがとうございます。言語が違うので、翻訳が少しおかしいかもしれません😺。
@zanzeusmandid
@zanzeusmandid 11 месяцев назад
Whats that thing u use in 0:29?
@jaydenrichards8815
@jaydenrichards8815 Год назад
My grabber thingies are not popping back up anymore , what should I do ?
@mobetetelo6406
@mobetetelo6406 7 месяцев назад
Mine too Please help if you found solution
@deltafour1212
@deltafour1212 5 месяцев назад
You use very little grease for the bearings on your freehub where others use the "whole container". Which is the proper "amount" for overhauling a freehub or does it matter?
@NiceBikeService
@NiceBikeService 5 месяцев назад
A thin layer of thick grease is sufficient; if you apply too much grease, the pawls will begin to "stick"
@deltafour1212
@deltafour1212 5 месяцев назад
@@NiceBikeService Thank you!
@antonioZaRasFiNaLbOsS
@antonioZaRasFiNaLbOsS Год назад
Can I remove it without the special tool? Can I use something from around the house as a tool?
@antonioZaRasFiNaLbOsS
@antonioZaRasFiNaLbOsS Год назад
Or should I buy the tool.
@robertmcfadyen9156
@robertmcfadyen9156 Год назад
I made a freehub bearing race removal tool on CNC .
@makantahi3731
@makantahi3731 5 месяцев назад
what tool you have around the house
@antonioZaRasFiNaLbOsS
@antonioZaRasFiNaLbOsS 5 месяцев назад
@@makantahi3731 Everything except the freehub removal tool.
@maxencetarlowski4033
@maxencetarlowski4033 Год назад
bonjour je recherche une bonne graisse au lithium pour mon velo, vous avez des préférences ? ps très bonne video
@maxencetarlowski4033
@maxencetarlowski4033 Год назад
@@NiceBikeService d accord merci beaucoup :) 😀
@deanwatson1250
@deanwatson1250 Год назад
What grease are you using.
@makantahi3731
@makantahi3731 5 месяцев назад
any, softer -better
@ataksnajpera
@ataksnajpera Год назад
AAaaaa to teraz wiem dlaczego czasami (narazie doś rzadko) kaseta nie napędza koła jak pedałuję. Poprostu te blokady mi nie opadają. A miałeś tak że jadąc bez pedałowania kaseta nadal chce obracać łańcuchem?
@abdellahzaidi1257
@abdellahzaidi1257 8 месяцев назад
لذيك اعوجاج في حامل الكاسيط.
@postmodernism1417
@postmodernism1417 Год назад
there is no two slots on the cover of my Shimano freehub like yours. i don't know why. can you tell me how to open it? 😢
@robertmcfadyen9156
@robertmcfadyen9156 Год назад
The bearing race cap would have been shrink fitted and not to be removed as is the case with a few lower - end hubs like FALCON AND PROWHEEL OR NL INDUSTRIES , ,for example .
@11GDR
@11GDR Год назад
Не зрозумів, невже у барабані 2 ряди кульок?
@user-yd7gy3gb6s
@user-yd7gy3gb6s 11 месяцев назад
Ola qual o tamanho da esfera que vai dentro do Free hub? Obrigado.
@user-yd7gy3gb6s
@user-yd7gy3gb6s 11 месяцев назад
@@NiceBikeService sim, é 1/8" , obrigado.
@efrensantiago5583
@efrensantiago5583 6 месяцев назад
que herraminetas son las que se utilizan y la grasa de cual es? saludos!
@NiceBikeService
@NiceBikeService 6 месяцев назад
La herramienta de extracción de la carcasa del piñón libre es necesaria para abrir el piñón libre y la grasa de calcio se utiliza para la lubricación. Espero que los nombres estén correctamente traducidos al español.
@Cornel-ng8xe
@Cornel-ng8xe 5 месяцев назад
Im sorry what is the green yellow paste?
@NiceBikeService
@NiceBikeService 5 месяцев назад
it`s thick calcium grease Divinol
@abzaman77
@abzaman77 11 месяцев назад
What grease are you using?
@abzaman77
@abzaman77 11 месяцев назад
​@@NiceBikeServicecalcium greese that i could find doesn't look like what you are using.
@makantahi3731
@makantahi3731 5 месяцев назад
00:27 because both sprogs don't engage at the same time, I was on a steep hill and only 1 sprog engaged and the cassette body became deformed(magura julie)
@NiceBikeService
@NiceBikeService 5 месяцев назад
I sympathize with you. I hope you made it down the mountain without any injuries.
@makantahi3731
@makantahi3731 5 месяцев назад
@@NiceBikeService good thing of climbing is that it does not require power if i have to return on starting point( some old tale says: and shit can go downhill if is enough steep)
@funni2051
@funni2051 5 месяцев назад
What company make that tool to get that cone out
@NiceBikeService
@NiceBikeService 5 месяцев назад
I'm sorry, I don't quite understand what cones you're asking about
@filabatya
@filabatya Год назад
Для колеса би якусь підставку, щоб шпиці не шкрябати і не гнути при затягуванні)
@brush_popper
@brush_popper Год назад
True mechs dont use gloves. Nice bro.
@OjStudios
@OjStudios Год назад
Gloves alter dexterity of ones hands, but heard and seen many cases where infection might develop and one might even lose a finger. Better to be safe than sorry. Having said this, I too skip gloves way too often when working on dirty ass bikes.
@r0ns0n0l
@r0ns0n0l 3 месяца назад
yeah till u loose your fingers ^^ thats something u willll never hear of in the media, but it happens every day . i know people myself who lost hteir fingers due to working on i the bike and getting infected and lossing their fingers just from a super tiny scatch
@jaydenrichards8815
@jaydenrichards8815 Год назад
My bikes pawls aren't springing up , how do I fix it
@jaydenrichards8815
@jaydenrichards8815 Год назад
It's already clean
@dariott1542
@dariott1542 6 месяцев назад
Buonasera,le sfere all'interno che diametro sono?
@NiceBikeService
@NiceBikeService 6 месяцев назад
mai misurato
@sayedhassan6322
@sayedhassan6322 Год назад
أللهم صلى وسلم وبارك على نبينا وحبيبنا محمد صلى الله عليه وسلم ❤❤❤
@serhiiholovko9233
@serhiiholovko9233 10 месяцев назад
Thanks for the content. Slava Ukrajini
@NiceBikeService
@NiceBikeService 10 месяцев назад
Героям слава! Дякуємо за відгук!🇺🇦😽
@banchasound
@banchasound 3 месяца назад
How many ball one side?
@banchasound
@banchasound 3 месяца назад
inside 22/outside 24 ?
@NiceBikeService
@NiceBikeService Месяц назад
there may be a different number in different freehub models
@hamzamhamdi3968
@hamzamhamdi3968 Год назад
Where can I find the tool to open de freewheel body? 00:29
@makantahi3731
@makantahi3731 5 месяцев назад
you can made it from ratchet bit
@Benji-uh5yj
@Benji-uh5yj Год назад
De utálom ezt a fajta kazettát :D
@eliasnap
@eliasnap 3 месяца назад
Eu trocaria a roda hhahaha
@NiceBikeService
@NiceBikeService 3 месяца назад
É também uma boa maneira de😹
@ivanav6482
@ivanav6482 Год назад
eso es un mecánico de verdad, trabaja sin guantes...
@ivanav6482
@ivanav6482 Год назад
@@NiceBikeService mira, tengo varios amigos bicicleteros, y saben cómo vos, y ninguno usa guantes, ojo, esta bien cuidarce las manos, pero a mi también me gusta hacer el mantenimiento de mis bicis sin guantes.
@DramaneKeita-zf9bk
@DramaneKeita-zf9bk 11 месяцев назад
Tu es toujours
@makantahi3731
@makantahi3731 5 месяцев назад
00:11 that is why here must not be grease
@NiceBikeService
@NiceBikeService 5 месяцев назад
The main thing is to grease in the right places😺
@giorgi5936
@giorgi5936 Год назад
Momwere ragaca problema maq da risi bralia mainteresebs habze
@giorgi5936
@giorgi5936 Год назад
A have deore xt rear hab and hub body flexing out whyy ? How to fix it
@dr..livesey
@dr..livesey Год назад
​@@giorgi5936 remove one metal ring
@Ales-eg6gu
@Ales-eg6gu Год назад
💯👍💶
@user-dr6nk9nw1s
@user-dr6nk9nw1s 5 месяцев назад
1.20 minutes complex
@NiceBikeService
@NiceBikeService 5 месяцев назад
Thank you for your feedback 😽
@makantahi3731
@makantahi3731 5 месяцев назад
03:05 these internal teeth can be reshaped by flat diamond file if are deformed or worn
@NiceBikeService
@NiceBikeService 5 месяцев назад
In some cases, we polished them
@pawelis5179
@pawelis5179 Год назад
Co to za smar którego używacie??
@wojtekfus6406
@wojtekfus6406 Год назад
Wat а smar?
@makantahi3731
@makantahi3731 5 месяцев назад
03:18 no, grease can be only on balls
@NiceBikeService
@NiceBikeService 5 месяцев назад
👍
@WildernessMusic_GentleSerene
@WildernessMusic_GentleSerene 9 месяцев назад
I miss the days of the freewheel. Every time my chain stretched, I would replace chain and freewheel, getting all new bearings, spring and pawls. Now, the cassette has destroyed bicycling with index shifting, and outrageously expensive shifters and drivetrains. I miss the days of downtube friction shifters, no housing, just a direct connection to the derailleurs, I never wished back then we had indexing, the skill of shifting with these simple levers was earned and never a problem. I hate how technology has made the bicycle worse over the last 50 years and finding parts sometimes impossible. You simply went to the bike store and said I need a chain, they fit every bike. Freewheels could be built up to have any gear ratios you wanted. Cassette gearing today, and gear ratios are all wrong unless you buy a very narrow range like a 14-23. Currently I have a good setup for flats and limited mountain climbing for the road: 22-32-42 chainrings, and a: 12-13-14-15-17-19-21-23 for an 8 speed cassette 24 speed (minus repeats) bike.
@NiceBikeService
@NiceBikeService 9 месяцев назад
Thank you for your story, very interesting and informative. In our country, many years ago, there were terrible bicycles on which it was impossible to ride comfortably. Therefore, we are now happy to use new technologies.
@r0ns0n0l
@r0ns0n0l 3 месяца назад
me, as an more extreme performing biker than you, obviously prefer the parts and standards of today, because they are simply way better for top performance. Watch DH racing in the 80s the 90s and now ^^ which bikes are obvioulsy more ez to ride ? and by that bringing more safety into riding at all ?? ^^ YES
@WildernessMusic_GentleSerene
@WildernessMusic_GentleSerene 3 месяца назад
​@@r0ns0n0l That is precisely it, you hit the nail on the head. Racing and recreational bikes have nothing to do with each other, I road raced professionally in the 1980s, I used Campagnolo Super record and custom made frames. But today, I don't need or want any of that. Today I have the strongest recreational bike in the world, the most dependable and costs under a grand. Road and off-road has very little to do with each other too. I bought the first commercial mountain bike back around 1982 and have been gravel riding and off-roading for over 40 years.
@r0ns0n0l
@r0ns0n0l 3 месяца назад
@@WildernessMusic_GentleSerene yes , i have xt hubs with cones and balls ^^ most enduring if serviced well. and i think below abec 7 thyre even better for bottom bracket too, especially for road, yes ^^
@ΑΣΔΦΓΗΞΚΛ
@ΑΣΔΦΓΗΞΚΛ Месяц назад
The cog type cassettes with the freewheel built in to the cog used to break axles But apart from that I agree completely, I've landed on 22-32-42 and 8 speed 11-34 The cassette is comparatively cheap - £20 not the £150 for the SRAM 14 speed one shifter set up, oh and I've got 175mm cranks The chain I use is KMC 7 speed in brown steel, these last twice as long as the recommended 8 speed ones I too am convinced they've moved to this stuff that wears out every five minutes to increase sales Beyond that I'm a bit miffed seeing this video, I've just replaced one of these and I could have serviced it. Then again I'd have needed the tool, maybe I can improvise something next time now I know it's a left hand thread I'm surprised to see the ball bearings not being replaced as a matter of course though
@ionutvatafu-vk7eb
@ionutvatafu-vk7eb 10 месяцев назад
Mit Diesel wird richtig sauber.
@MrGregry
@MrGregry 8 месяцев назад
man, fuck off the axle in the rear hub, which can't be made of a tube, because it will twist anyway
@NiceBikeService
@NiceBikeService 8 месяцев назад
⚠ ❓ ⚠ *ASK YOUR QUESTIONS* 👇👇👇
@r0ns0n0l
@r0ns0n0l 3 месяца назад
u didnt demagnetize the bearings ? u better should ^^
@MrGregry
@MrGregry 8 месяцев назад
cara, foda-se o eixo do cubo traseiro, que não pode ser de tubo, porque vai torcer de qualquer jeito
@NiceBikeService
@NiceBikeService 8 месяцев назад
Esta bucha é muito valiosa para o proprietário da bicicleta😺.
@usualsuspectrider1367
@usualsuspectrider1367 3 месяца назад
LOOOOOOOOOOOOL
@r6_3600
@r6_3600 Год назад
wait only 2 dogs here not 3 ?!!?
@r6_3600
@r6_3600 Год назад
they are not symmetrical
@r6_3600
@r6_3600 Год назад
@@NiceBikeService ok it is normal but why not to put them opposite to each other
@EllasPOSEiDON
@EllasPOSEiDON Месяц назад
Incredibly poor design. Only two pawls. So bad.
@NiceBikeService
@NiceBikeService 29 дней назад
The manufacturer decided to save money, but users and nail technicians are in trouble
@EllasPOSEiDON
@EllasPOSEiDON 29 дней назад
@@NiceBikeService Of course, I know. Te strange thing is, you have to go very high in price if you want to get something decent quality. Not even Shimano XT or XTR good enough with their latest freehub body design. That is also very poorly designed staff, lots of people have issues with them.
@tyf00s
@tyf00s Год назад
Please use gloves 😉
@hateemall5438
@hateemall5438 Год назад
gloves r for girls😂
@sashabagdasarow497
@sashabagdasarow497 Год назад
​@@NiceBikeService just use latex gloves bro
@climatechangedoesntbargain9140
​@@sashabagdasarow497 Sounds like a waste
@sashabagdasarow497
@sashabagdasarow497 Год назад
@@climatechangedoesntbargain9140 nah, very good, and keeps hands tender and soft :) Something you'll appreciate if you do something meticulous/accurate, but wanna repair your bike too
@Reflec999
@Reflec999 Год назад
Grease keeps your hands tender and soft.
@hartleyhare99
@hartleyhare99 2 месяца назад
New freehub on my bike but ive started to hear a slight tinking sound when im pedaling😢Im sure its coming from that area. When one thing goes wrong with the bike everything else comes out in sympathy with it. A pain in the ass😅
@-DIEU-TE-CHERCHE-9923
@-DIEU-TE-CHERCHE-9923 Год назад
Super vidéo Merci pour votre aide ( Dieu te cherche, Clic sur le Smiley)
Далее
How to restore freehub on a bicycle. Bicycle repair
11:07
Я НЕ ОЖИДАЛ ЭТОГО!!! #Shorts #Глент
00:19
Китайка Шрек всех Сожрал😂😆
00:20
Determining Cassette/Freewheel Type & Tool
8:38
Просмотров 2,2 млн
Shimano Freehub Service
9:18
Просмотров 116 тыс.
Changing a broken freehub body on a Shimano bike wheel
12:05
making super fast bike
3:05
Просмотров 4,8 млн