Your endlinks clunk? HERES THE FIX! //

Подписаться 13 тыс.

Просмотров 4,9 тыс.

50% 1

Check out www.Heavymetalwrx.com for merch!I
Disclaimer: Stormrazor is the owner of all music in this video! Check them out at / @stormrazorofficial
After my fourth try I finally figured out the issue with the end links. I just needed to TWERK them some more! Im so glad to have resolved the issue. There is almost no noise now and the car feels great... just like it should! If youre having issues with the endlinks this may be the solution for you as well!
Disclaimer: I am the owner and creator of all the music in this video!
!! MODS LIST !!
Use code 'heavymetalwrx' for discounts at Perrin, Aeroflow Dynamics and Diode Dynamics.
Performance:
Perrin Intake
Perrin Turbo inlet
Perrin diverter valve
Perrin Front mount intercooler
Custom fab jpipe and catback from Invidia and MAPerformance
Perrin Super Shifter Stop
Cosmetics:
Noble Big bulge hood scoop
Noble STI Oem lip:
Noble STI oem style spats:
Noble CS grill:
Aeroflow Dyanmics OEM style duckbill:
Ebay side skirts
Cosmis Racing XT-206R
Diode Dynamics Tail as turnlight
Noble Blue side mirrors with turn lights
Noble Gen2 Carbon Fiber EBrake:
Tuner:
Ecotech: ecotechimportauto.com/
Boosted Performance Tuning: www.boostedperformancetuning....
Chapters:
0:00 Intro
7:56 No endlinks sound
9:02 OEM endlinks sound
9:45 Aftermarket endlinks sound
10:13 Installing aftermarket endlinks
14:45 First drive after install
16:05 Outro

Авто/Мото

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 130

@HeavyMetalWRX 10 месяцев назад

These LEDs from amazon are AMAZING. Thank you Jeremy! Pick them up here : amzn.to/3PLLmwy

@sodjer 10 месяцев назад

and hopefully better than stringing the garage table lamp out XD

@HeavyMetalWRX 10 месяцев назад

@@sodjer they are incredibly bright, they have hooks to hang, and magnets. The table lamp won't ever be forgotten. It just gained 2 extra helpers 🤣

@WRXcellent 2 месяца назад

I'm currently in the market for coilovers for my VB and have done a lot of research and found many people having this problem. The solution was to tighten the end links more than you thought you had to and to tighten them with load on the suspension. Thanks for the video!

@RoaminRomeros 10 месяцев назад

I’ve had so much issues with my FactionFab FSpec but they have been super helpful and we have been going back and forth trying to find the solve. Thank you for posting this. I’m with you I’m so annoyed with everything at this point! Learning to live with it.

@HeavyMetalWRX 10 месяцев назад

Definitely go back and make sure the washers are on the right side. Then torque those babies down.

@VB_Bryan 9 месяцев назад

Just got my 23 wrx base in white. Safe to say I have been binging your videos Awais!

@MrGsxrme 3 месяца назад

I like to disagree with some topics but i just installed the silvers, cusco sway bars and a STI trans. Everything seems to be on point other than the clunk. The sound definitely sounded like endlinks so I googled it and Boom, your video. I will say I think when I wake up in the morning I'm going to check the bolts are torqued correctly. I also used the same wrench and something didn't feel right. Thank you for making this video, very clear understanding. Everyone seems to skip endlinks.

@erinsonlara478 3 дня назад

I had this same problem after install, went to a alignment shop the next day and told the tech what I was hearing he winded retightening the end links for me and problem solved since then

@InstagramVBCarnage 10 месяцев назад

The right tools make a big difference

@alexvandenberge4385 3 месяца назад

Thanks for this Vid man, really helps! last week i got BC coils and Kansei wheels. Did the coilovers myself and torqued all bolts to spec like you did (all over spec) and went to a local tire shop after install to get tires swapped and on a short drive to the shop heard HARD clunking on front passenger side, told them about the issue and they said to come back next week when a more experienced tech can help find the issue. My next day off i will try this and see if it helps. Hopefully this will fix my problem, it seems like most issues are from the end links. If this doesn't fix the issue then il just go back to the OEM and look for replacements for springs, hopefully and update in a week when I'm happy heheh

@HeavyMetalWRX 3 месяца назад

Yea man I hope it gets sorted out. So far like 99% of those clunk issues have been end link related, no doubt!

@deepydeeps 2 месяца назад

I torqued the shit out of my silvers endlinks and im still getting the same noise as you..I bought some SMY spherical joint endlinks that im going to throw on soon and hopefully the noise goes away on my VB...so frustrating but thank you for making this video

@Wokturdsniff 10 месяцев назад

With a wider set a tires and wheels, do you get any more weight and Feedback in the steering rack? That’s one thing I hated when I test drove a 22 was that ultra light numb rack, as bad as a Ford fusion.

@ROBBBIIINNN 10 месяцев назад

I got my car a year ago and I’ve always had this sound it happens whenever I do a u turn it clunks from the rear.I wonder if I have warranty with Subaru for it.I never brought it in because Ive always feared having to pay alot of money at the dealer

@chrischarles9218 10 месяцев назад

✌those are G-Tek cut resistant gloves. If you get the correct size they wont get in the way when threading nuts and bolts. They even make them for operating touch screens. Amazon sells them by the pack.

@HeavyMetalWRX 10 месяцев назад

They are the best. Saves my hands tbh. As you can tell I haven't been cut in weeks!

@davidchow11 6 месяцев назад

I have similar clunk noise issue on my VB, when I turn the steering wheel all the way to left or right and reverse the car , there is clunk noise came from front wheels. I reported it to Subaru and they told me it’s the front lower control arm bushing problem. The problem was fixed after they replaced the front control arm bushing. But the automatic brake was activated today and the clunk noise came back again. I gonna try your method.By the way what’s the size of the socket that you used for the end link nut? Thanks

@contentkings 8 месяцев назад

I've been dealing with the same issue whiteline end links and BC coils and tried to fix it 3x and still got clunks with both whiteline ones and stock ones. It's funny how the coils install turned out being the easiest part ahahah

@HeavyMetalWRX 8 месяцев назад

These Endlinks took absolutely forever. I didn't realize it was gonna be such a pain. Still once it is set though you're good....which can be a bit 🤣

@JeffPettibone-dq2xh 10 месяцев назад

It's the gap in between the threaded end of the end link that goes in between the coilovers that makes that clunk. I also had the same problem with my silvers. Easy fix is to get a shouldered washer for each side on top and on the bottom of the end link. This may work for you guys as well. I found zero info on line as I just tried it and it worked

@rafael502 10 месяцев назад

Try making a video on it

@JeffPettibone-dq2xh 10 месяцев назад

@@rafael502 ok, I'll have some time this weekend and hopefully get one posted

@link4eva10 10 месяцев назад

That's why tightening more helped

@Anthony-gq9eu 7 месяцев назад

Do you know what sized shouldered washer should be used?

@doubleflo7 10 месяцев назад

Someone on Reddit suggested using bicycle wrenches for the end links, worth a try instead of the locking pliers.

@HeavyMetalWRX 10 месяцев назад

If they come in the right size! Whatever gets the job done tbh. At this point I'm hoping I dont have to mess with them again....until I remove them 🤣

@BOOSTEDDESIGNSWRX 12 дней назад

Def get yourself a decent torque wrench, impact, and impact bits to make your life easier

@HeavyMetalWRX 12 дней назад

@@BOOSTEDDESIGNSWRX you are absolutely right. I finally got an impact. I need to get a new torque wrench and better bits tho.

@tranwrx 2 месяца назад

My va sti make noise over bumps been fighting this for over 4k miles 😢 hks hipermax iv sp coilover

@jeffersoncook3948 10 месяцев назад

I just ran the stock links with my coilovers and never ran into issues even thought the angle is pretty steep

@HeavyMetalWRX 10 месяцев назад

Any people have told me about the stock endlinks but you hear those clunks. It sounded BAD. Like the whole spring was moving back and forth.

@jumpnjack808 10 месяцев назад

check the swaybar bushings. and everything connected to the links.. i was a BMW mechanic. just a thought. might not be the links

@HeavyMetalWRX 10 месяцев назад

It's all fixed now! I have had zero noise the last few days that I've been driving. 🙏🙏

@GamerMaster250 10 месяцев назад

When I installed my coils I kept my oem endlinks I have never heard anything weird or noises and have taken from Chicago all the way to New York and back and it has been fine.

@HeavyMetalWRX 10 месяцев назад

I'm still confused at how many people have been doing that. Could it be the height? But even that doesn't make sense.

@waybach 10 месяцев назад

What kind of coilovers bro?

@raumeywilson4684 5 месяцев назад

Same problem with my fortune autos. Had them professionally installed and they checked again when I did my alignment follow up a few weeks after. So noisy, they torqued them down and everything and the 2nd trip I thought they were fixed but the noise came back after a few days. Driving me absolutely nuts. I just got the SMY adjustable end links in the mail today but gotta work up the willpower to get out there and install...gonna lose my mind if it's still there 💀

@HeavyMetalWRX 5 месяцев назад

For me I wasn't holding down the Endlinks bolt whole torqueing so it wasn't actually doing anything. I would suggest you torque them suckers yourself if you can. A lot of shops have been installing coilovers and not doing a good job.

@deepydeeps 2 месяца назад

How did the smy endlinks work out? I just bought a set and hoping this fixes the issue with my silvers

@tinfoilmoose Месяц назад

hey bro… do you have an update on this noise? i’ve been chasing it across 4 different front end suspension set-ups and 3 different sway end links. i’m beginning to think it’s coming from somewhere else.

@HeavyMetalWRX Месяц назад

Yea man. For me it was torque spec on Endlinks. I was able to verify it because I drove the car with and without Endlinks. I know it's hard to confirm where the sounds are coming from.

@jaypee024 23 дня назад

the thing that pisses me off is there are pretty videos showing the install but leaving out certain important details or things to look out for. They make the install look like an easy 1 2 3 when we all know it's never as easy as they make it look.

@ChazOfGod 10 месяцев назад

The only time my endlinks made noise was when the jam nut came loose for the adjustment, it would clunk. I have fortune auto 500s they are squeaky though.

@HeavyMetalWRX 10 месяцев назад

I've checked twice after driving for a few days, jam nuts are still solid but I can see that as something Loctite could fix.

@raumeywilson4684 5 месяцев назад

did you ever fix squeaks or just roll; with it? I have the same coils and they squeak a bit....no excuse for the pricepoint...they should be perfect.

@silversage1626 10 месяцев назад

I have the silvers neomax and they clunk like crazy and I thought it was the pre load wasn’t set correctly but this might be it

@HeavyMetalWRX 10 месяцев назад

As long as you get the washers in right and torque down the endlinks I think you'll have it fixed.

@waybach 9 месяцев назад

I’m getting the clunks right after my Subaru mechanic installed my FA500’s and they clunk so badly but mainly at slow speeds and turning at slow speeds. Anything over 40mph I don’t hear any clunking or potholes don’t clunk. Any advice? We used the adjustable endlinks they sent me, but maybe I should just tighten the Hell out of Nut? Think he said it was a size 14 Nut

@waybach 9 месяцев назад

If this works I’m going to subscribe to you from my entire family tree.. lol that’ll be like 40subs easily

@HeavyMetalWRX 9 месяцев назад

Roflll dude for me it was the torque on the bolts that hold the endlinks to the sway bar and coilovers. I wasn't torqueing them down enough. They suggested 33lb I went a bit to 40lb. Maybe my torque wrench is miscalibrated? Either way I got those his down tight and that was my issue. It took me. A long time to get this sorted out so I feel for you.

@waybach 9 месяцев назад

@@HeavyMetalWRX were you getting any sounds from the rear? I’m hearing creaks not so much clunks

@JDMVB 10 месяцев назад

Silent isn't gone man, plus that huge clunk going down your driveway, hopefully you can figure it out because I really want to put suspension on my VB as well and I'd love to be able to trust the information I'm hearing

@HeavyMetalWRX 10 месяцев назад

I did fix it. I just needed to torque down their endlinks better. I shit this on Tuesday and been driving for 2 days. The car makes no noises and feels great!

@harleycharlie5330 10 месяцев назад

@@HeavyMetalWRX I got fortune auto with adjustable end links I adjusted them to the same size as stock and have the car pretty low but have some squeak where they supposed to be shorter ???

@HeavyMetalWRX 10 месяцев назад

@@harleycharlie5330 what sounds did you hear? In my video I have the loud clunking where it sounds like something moved and then I have the aftermarket ones where it sounds like a box of rocks. I shortened my endlinks to the smallest size possible. For me it was also the torque specs on the end link bolts that go into the coilovers and the sway bar.

@harleycharlie5330 10 месяцев назад

@@HeavyMetalWRX I don’t have any clunks mine sounds good except light squeak when I put compression hard softer I go less squeak the fortune auto cane with end links

@HeavyMetalWRX 10 месяцев назад

@@harleycharlie5330 hmm I think that might just be the dampers. I'm not 100% sure about squeaks. My brakes squeak so I got too many noises to keep track 🤣

@Timgeo84 10 месяцев назад

Did the clunk come from both sides or one side? I was thinking maybe the swaybar has something to do with it?

@HeavyMetalWRX 10 месяцев назад

It was the end links and sway bar not being tight enough. All fixed now 🤘

@LeanChurro 10 месяцев назад

I have revel coils on my vb, came with adjustable end bar links and they clunked too, i ended up having to play with the lengths until i got it down. They still clunk but ALOT less lol. Annoying issue to resolve

@HeavyMetalWRX 10 месяцев назад

That's interesting. Ive actually never heard of revel. Did the endlinks come with the little washer reducer ?

@loganmorris2492 4 месяца назад

I have revel coilovers too and they clunk a lot. I got white line front end links instead of the revel ones and still heard clunking. what did you end up doing to resolve the issue different end links?

@erdinczor1 9 месяцев назад

Hey! Has anyone successfully used the stock end links?

@dkoolin6529 10 месяцев назад

Been having some trouble with the VB on faction fab coilovers.

@HeavyMetalWRX 10 месяцев назад

What noises are you hearing?

@dkoolin6529 10 месяцев назад

@@HeavyMetalWRX clinks on turning full lock in the fronts, and some heavy clunking in the right rear. I triple checked everything was tight even took it for suspension check. I was told everything looked good. Might be a torque thing, might try torquing to spec.

@HeavyMetalWRX 10 месяцев назад

@@dkoolin6529 are you on OEM endlinks? Someone did mention that there is an issue with OEM endlinks at certain heights or angles. The loud clunks at full oil I got only on OEM endlinks and to me it sounded like the spring was binding and moving in and out of place.

@dkoolin6529 10 месяцев назад

@@HeavyMetalWRX yeah oem endlinks are probably the reason for the fronts

@HeavyMetalWRX 10 месяцев назад

@@dkoolin6529 the rears I'm not 100% sure. I would still say torque specs since nothing really moves up or done behind us. I have very little experience with suspension so I'm learning as we go. We're all learning together.

@murphh5068 2 месяца назад

What length did you leave the endlinks?

@HeavyMetalWRX 2 месяца назад

I left them the same length as stock

@murphh5068 2 месяца назад

@@HeavyMetalWRX thanks for the reply.. very appreciated.

@jimmyKwrx 10 месяцев назад

I saw your car at subifest Midwest but I didn’t see you anywhere

@HeavyMetalWRX 10 месяцев назад

So sorry I wasn't able to catch you. I was walking all over the place. 😭

@jimmyKwrx 10 месяцев назад

@@HeavyMetalWRX no worries, it was a good event and a beautiful day

@HeavyMetalWRX 10 месяцев назад

@@jimmyKwrx ha! I couldn't agree more!!

@danmac6185 5 месяцев назад

You need to measure the run on torque when installing self locking nuts.

@danmac6185 5 месяцев назад

Also, you aren't supposed to reuse a self locking nut.

@HeavyMetalWRX 5 месяцев назад

Do you mind explaining a bit more ? Which nuts are you referring to? Is it the ones on the Endlinks? I used the nuts the new Endlinks came with. Each time I've switched them out it's been new nuts. Also the issue has been resolved for some months, thankfully.

@Gregsheppo66 10 месяцев назад

Over-torquing nuts isn’t being safe. Following the recommended torque setting is.

@HeavyMetalWRX 10 месяцев назад

By 6lb / ft isn't hurting anyone. If you watched the full video you see it's been pretty frustrating and I've been dealing with this for months. If that's what it takes to fix the issue then that's what's happening! 🤘

@Gregsheppo66 10 месяцев назад

@@HeavyMetalWRX I watch almost all your videos for the past 9 months or so. I’m just over obsessive when it comes to manufacturer settings. I got it from my dad who was an incredible tool maker/engineer who had all of these sayings like keeping everything clean is half the battle & don’t overdo or under do & you’ll be fine. I’m glad you got the endlink drama sorted. I’ve been there done that many years ago when cars & motorcycles had carburettors & points. It’s enough to make you cry when it stumps you. Keep the videos coming Awais. They make my 12 hour night shifts that much more enjoyable & help me understand what’s under my cars skin.👍

@HeavyMetalWRX 10 месяцев назад

@@Gregsheppo66 haha man of course! I appreciate the support. It's been difficult coming into the car world with zero experience on how anything works. I'm happy that RU-vid and the Internet are available for me to learn. The experience just comes over time. My dad was a "if it's not supposed to move fuck tape it till it doesn't move" guy 🤣

@pabloromo3921 10 месяцев назад

Maybe you dropped your torque wrench at some point or bumped it against something and it threw off the calibration . I've had that happen

@pabloromo3921 10 месяцев назад

Or maybe just time for a calibration

@HeavyMetalWRX 10 месяцев назад

@@pabloromo3921 to be fair , it's only $36 on Amazon. It could be the torque wrench. 🤷‍♂️. I'd like to spend more on nicer tools but I already need just regular tools. Eventually I'd like to clean out my garage and get a real tool chest. Then I'll get fancy stuff that lasts.

@waybach 10 месяцев назад

I think he meant you might’ve threw off the calibration on accident

@HeavyMetalWRX 10 месяцев назад

@@waybach yea it's kind of doodoo. I actually ended up breaking the first one within a month and the company sent me a Replacement. It may not have even been me 🤷‍♂️

@4uto_4ddict 9 месяцев назад

Well, this video is timely.

@HeavyMetalWRX 9 месяцев назад

Haha why is that? Are you having endlinks issues ?

@4uto_4ddict 9 месяцев назад

@@HeavyMetalWRX I just finished installing Silvers on the car last night. The whole endlink situation is exactly as you described it. I've watched 10+ videos and spoken to multiple reps from companies about it. Nothing is consistent. I'm going to try your locking pliers trick tonight, I know they aren't tight enough. Appreciate your video.

@HeavyMetalWRX 9 месяцев назад

@@4uto_4ddict dude if I can make one more suggestion. Use the smaller spanner that came with the coilovers. You can hold on to the nut easier than the locking pliers...although those will also work. Try that before buying anything. DM me on IG with your progress. Hopefully I can help!!

@Subi_doo 7 месяцев назад

Is that an alcantara steering wheel?

@HeavyMetalWRX 7 месяцев назад

It's Suede. I got it from Rexpeed

@Subi_doo 7 месяцев назад

@@HeavyMetalWRX nice. I’ll have to check it out. I was going to get a custom one done, but that’s going to cost me close to $900

@byronstoddard1835 10 месяцев назад

Called vice grips

@HeavyMetalWRX 10 месяцев назад

Ty, I struggled with the name, I had to read it off the box.

@aaronr9551 10 месяцев назад

What is the name of your band?

@HeavyMetalWRX 10 месяцев назад

Haha now that's something I've never been asked. Actually am not a part of a band. Everything I play I play for myself by myself in my basement for fun. I would love to be a part of a band one day and make music as that is another hobby I absolutely love. I just don't know when I find the time. 😭 The music you were hearing in this video is Stormrazor who is my buddy's band.

@aaronr9551 10 месяцев назад

@HeavyMetalWRX I was listening to some jams you had in a prior video and it said you wrote the music as a one man band and if sounded pretty killer so I thought I'd inquirer. I'm a metal head and a wrx owner so it's killer to see someone else into both things.

@HeavyMetalWRX 10 месяцев назад

@@aaronr9551 dude that is awesome. I wasn't sure if the two went hand in hand for the general community but for me it was a no-brainer. Also, it saved me a lot of time and money to just use my own music than to go find other people's music or use just the generic tracks that RU-vid has. Do you play any instruments?

@aaronr9551 10 месяцев назад

@HeavyMetalWRX nah I'm just a metal fan. I don't play any instruments. Black, death, thrash in their extreme forms are what my ears spend most of their time listening to. The track you had on the bulge video sounded a little black metal ish. Not sure if that was the goal but it sounded killer either way.

@HeavyMetalWRX 10 месяцев назад

@@aaronr9551 oh yeah dude. I am a huge fan of symphonic metal, death, Doom, You name it. I love it.

@ovalshrimp 10 месяцев назад

is it 5/8 maybe?

@HeavyMetalWRX 10 месяцев назад

I actually went to AutoZone and tried all the wrenches they had. 17mm was the closest.

@mariot8879 9 месяцев назад

Have you fixed that noise at 14:48 in the video. That’s the noise I keep hearing when I’m going down a drive way or cornering. @HeavyMetalWRX

@HeavyMetalWRX 9 месяцев назад

So I'm not 100% sure what that was, maybe the suspension settling ? Or the spring doing something ..I haven't heard it since. I was worried that first time. As of right now the only noises I have are random squeaks which idk if they will ever go away. There is ZERO clunking, ZERO weird snaps or crackles or whacks or thuds of metal. It took me a while but I'm happy to report that it's all good now 🤘🙏

@mariot8879 9 месяцев назад

@@HeavyMetalWRX are you running the oem endlinks front and back or the aftermarket ones?

@HeavyMetalWRX 9 месяцев назад

@@mariot8879 OEM in the back and adjustable in the front.

@Rowbee 6 месяцев назад

still no clunks ?

@HeavyMetalWRX 6 месяцев назад

Everything's been good since I tightened down the Endlinks.

@Gregsheppo66 10 месяцев назад

I’m better suited to paying professionals to install mechanical parts, but then I’m not a youtuber making a living from sharing my car builds with the world. I respect those who do this, but for me there’s a safety aspect when it comes to the engine, the brakes & the suspension. There’s a fine line between being safe & disaster.

@HeavyMetalWRX 10 месяцев назад

You are definitely right on that one. My wife would be scared every time she got in the car. Really what you need is knowledge and experience. RU-vid helps with the knowledge part ...experience you just gotta keep doing everyday. That's the scary part but I feel like I'm considerably more comfortable today versus a year ago when I didn't even want to look under the hood.

@waybach 9 месяцев назад

I just paid a Subaru mechanic to install my FA500 coilovers and it started to clunk within 2days. Check out my short I just posted. I’m telling you these FA/Silvers guys are lacking in the engineering dept….

@HeavyMetalWRX 9 месяцев назад

@@waybach for me it was 100%. The torque specs on the end links. As I was providing other people that information, they were also able to go back and retork the bolts on all of their endings, but you have to hold on to the bolt so that it doesn't spin when you're twerking the nut down It was 100% user error on my part.

@waybach 9 месяцев назад

@@HeavyMetalWRX are you talking about the size 14 Nut?