Лучшее на RU-vid
Кино
Авто/Мото
Видеоклипы
Животные
Спорт
Игры
Приколы
Развлечения
Хобби
Наука
Авторизоваться
Зарегистрироваться
Abom79 shaper
53:19
Hardtail Vise Build Ep.6: Shaping the Dynamic Jaw Body
9 месяцев назад
We fire up the ole Gould & Eberhardt 32" Industrial metal shaper to help us get started on the machining for the hardtail vise ...
36:50
Heavy Shaping Action
4 года назад
Getting in some more heavy shaping, testing different tool grades and tool grinds to compare results between cuts. The material I ...
34:13
SNS 220: Shaping 28" Parallel Bars
6 лет назад
Two pieces of 1" flame cut steel that I'm going to clean up in the shaper for a friend who wants to use them as parallels on his work ...
24:44
Shaping a Hydraulic Rod Clevis Part 1
6 лет назад
6" thick flame cut steel that will be a hydraulic rod clevis, being cut and machined to size on the G&E metal shaper. This was ...
35:49
Shaping a Tool Spacer Block
6 лет назад
Making use of a piece of H 13 tool steel I had to machine some spacer blocks for the shaper tool head. This is more practice on ...
25:56
Shaper Slotting
6 лет назад
Continuing my practice on slotting type cuts with the tool bits I ground and shown in the previous video. I made some changes on ...
39:35
SNS 181: Shaper Work, K&T Milling, Hydraulic Repair, Swedish Gift
7 лет назад
19:01
Abom79 Shaper Trip and Unloading
6 лет назад
Just a kind of 'behind the scene' view of the unloading of the shaper at Adam's work and some short shots of the trip down!
8:58
Loading the Shaper for Delivery to Florida
6 лет назад
The following Saturday after getting the shaper moved to the door a few of the guys met up to get the shaper loaded up onto the ...
34:18
Shaping an Aluminum Strut
2 года назад
I was asked if I could take on this job quickly so we got right to work. The welding shop is repairing and replacing a damaged strut ...
42:29
Machining a Gearbox Shaft
10 лет назад
In this video, I machine a new gearbox shaft using some 4140 shafting material. I show you the process from start to finish, from ...
1:15:02
Hardtail Vise Ep. 22: Internal Shaping to Fit Dynamic Jaw
6 месяцев назад
As we get to the final machining needed for our Hardtail vise, we'll get the inside area of the fixed jaw body machined to fit the ...
29:12
Machine Shop ASMR Volume 2
Год назад
Enjoy the sites and sounds of a manual machine shop including lathe, mill and shaper machining. No talking, no explanations, ...
26:14
Random Machining 7
5 лет назад
Continuation of short video clips of different machining jobs. Paypal Donation: ...
26:48
Splitting a 24" Sprocket in the Shaper
6 лет назад
Another sprocket job that I have shown before, but this time I get to use the G&E shaper to cut it in half in one shot! I'll show setting ...
Далее