We're a small plumbing company, that is family owned, in Lincolnton NC. Through our channel we hope to better inform the community on the type of work that plumbers do. Whether that be through our tutorials or videos from our recent jobs, we hope that all our viewers learn something new every time they watch one of our videos!
Always a crap shoot, i have drilled a couple holes took a tapered punch or screw driver or my favorite a narrow wood chisel and put it in the hole and pried it out like opening a can of tuna all in one piece. Then there are the others you have to do what you did.
Your going to be there a long time and you have to keep scraping the lead with a screwdriver to keep it shiny so it will melt better I'd suggest using using the drill like he did and then if you have to torch it go ahead but if you haven't experienced it burning okum is horrible
How did you remove all the leftover lead in the pipe after removing the old section?? Grind? Heat? Video was cut right at that part lol! Please let us know.
It is such a tremendous kindness to help people figure out how to fix things like this! What a weight off to have the hydrant fixed and not be carrying buckets, wondering if my husband would ever have time to look at it. Did it myself and said, 'Bam!' when it worked. 😁
I absolutely hate these donut gaskets, pain in my ass, I would rather stub the cast if the lead is still good and then use a proflex/mission band or a no hub depending on what I'm coming off with. But I've used those gaskets... And usually I find myself building a bracket or finding some other way to be able to pry it into place depending on my position.
Can’t you just cut the inside but not to the threads then chisel it out using the saw saw … you should watch some New York plumbers I think it’s called hydronyc (I could be wrong that your doing similar things though I know nothing about plumbing )
Next time get a hole saw larger than the pipe and smaller than the hub, and use the hole saw to remove the lead. It takes about 2 minutes and you will have it done...
Love these dudes that go through the trouble to film and upload a procedure and then skip the hardest part of the procedure. Hello!!! That's the part we struggle with! LOL
This is a real plumbing, ladies and gents. No shinny tools, no clean shirts - all just dirt, dust, rust, and heavy work - all in 16" of space under the house. Thank you for showing it how it is.
I usually cut a 1" section out of the pipe going into hub towards the top of the fitting and then another cut to remove half the pipe in hub. Then I take a hammer and break out the cast pipe that is remaining. Then with a flat screw driver and hammer collapse the lead ring and remove the oakum. Lead is saved to either repour or save for another job.
Save your drill bits by setting your screw gun torque to 3 to 4 steps under drill on the chuck. Lead is soft it will still drill it but if you bind the bit that will save it rather than have it snap