Thanks for the DIY information. When I was a kid in the 50's, water witching was common and widely accepted as fact. And we lived in an educated affluent area. But no wonder, it's been around since the 1500's. Also, this is a very good method for a shallow well. Thanks for all your work video taping this. I do videos too and know how much effort is involved.
It works for those whom have an affinity with nature...I do divining to find the best places for trees to be planted...100% accurate suck it up non believers
Have ya tried to add a wet sponge or cloth to back wall of dust bucket.. so when initial air shoots into dust collector it’s caught on the wall too. 🤷🏽♀️
You are loved! John 3:14-18,1 Corinthians 15:1-4, Ephesians2:8-9, Romans 10:8-13, Titus 2:13, 1John 5:5, 1 Thessalonians 4:13-18! 1 Peter 3:18! John 14:6 Salvation is God’s Grace alone through Faith alone in Christ Jesus alone! Our Blessed Hope! Jesus loves you so much, that He died for you so you can spend eternity with Him! Jesus came, died, was buried and He rose again on the 3rd day proving that He is God and that His blood paid for all sin for all time! You have been Justified! Just-as-if-I’d never sinned! Jesus is the Only Way, the Only Truth and the Only Life, and no one gets to the Father but through Him! Believe and receive Jesus into your heart and you will be Saved! Run to Him! Just as you are! Call on the Lord and you will be Saved!!! The Great Tribulation is fixin start, but those who believe will be Raptured first! Rescued just in time! Times almost up! Don’t be left behind! Numbers 6:-27 KJV 24 The Lord bless thee, and keep thee: 25 The Lord make his face shine upon thee, and be gracious unto thee: 26 The Lord lift up his countenance upon thee, and give thee peace. 27 And they shall put my name upon the children of Israel, and I will bless them
Great Video I might have to install one of these I have a 150 beehives that are not close to my house hauling water isn't that hard but then again this would be better
Always consider water from a shallow well to be unsafe to drink unless tested otherwise. Being that it is filtered groundwater (unconfined aquifer) they are too easily contaminated. Occasionally you will find a spring for your well and these are generally safe to drink from - but all water should be tested to be safe.
YOUR SENSES IS YOUR PERCEPTIONS. YOUR LEFT IS NEG AND YOUR RIGHT SIDE IS POS ENERGY IS WHY ITS A MINI TESLA COIL METER OLM METE IF YOU WILL.THE BODY IS MADE UP OF ENERGYS.
I was just reading the do's/don'ts of well location. For example at least 50 ft. from septic tank. When I was a child we spend a lot of time playing at the dump. On the way to the dump was a cemetery that had a pitcher pump. There was always an old can full of rain water to prime the pump. This well had the coolest, best water. It did not occur to me until many years later that given this was an old cemetery, with some graves dating to the early 1800's, that I was probably drinking the decaying bones of some of my ancestors. No wonder the water was so cool. Plenty of cool bodies buried around it lol.
Never assume it is safe to drink unless tested otherwise. Unless you are fortunate enough to be getting your shallow well water from a spring, it is to easily contaminated.
I lived in a beach house back when most people only had land lines and we had a storm surge. Apparently the salt water got into my phone line. The phone crackled like crazy after the water went down. Called for repair and apparently everyone with land lines were having problems. Two weeks later two guys drove up with a trailer with a ditch witch trench digger on it. I'm a dowser but I don't use rods. I use pendulum and my hands. These guys got out, talked to me, walked back to their truck and pulled out dowsing rods! Wow! They found the line immediately and they showed me where all my water lines and septic tank drain lines were as well. They said the phone company preferred to hire them because they never cut anyone's wires or pipes. I was impressed! My phone was back in good service the same day!
The auger I use by Seymour, the AUA2, has been rebranded as the Seymour Industrial S500 Iwan-Adjustable Auger SKU: 21326. If you can’t find it locally it can be purchased here - seymourmidwest.com/21326 - use code TigerCreek20 and get 20% off. Here are a couple videos about how I built my auger. Auger build - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dzIgMPACjCI.html Initial auger build - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--nN8-Aso5b4.html
The auger I use by Seymour, the AUA2, has been rebranded as the Seymour Industrial S500 Iwan-Adjustable Auger SKU: 21326. If you can’t find it locally it can be purchased here - seymourmidwest.com/21326 - use code TigerCreek20 and get 20% off. Here are a couple videos about how I built my auger. Auger build - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dzIgMPACjCI.html Initial auger build - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--nN8-Aso5b4.html
The auger I use by Seymour, the AUA2, has been rebranded as the Seymour Industrial S500 Iwan-Adjustable Auger SKU: 21326. If you can’t find it locally it can be purchased here - seymourmidwest.com/21326 - use code TigerCreek20 and get 20% off. Here are a couple videos about how I built my auger. Auger build - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dzIgMPACjCI.html Initial auger build - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--nN8-Aso5b4.html
I discovered not long after I bought mine. I have always been amazed with all of the fore thought that Stihl has put into every piece of equipment that they have made. My first Br400 in the mid 90's sold me on Stihl with the torx head screw that is used even today on all of their equipment and that one torx can completely disassemble and reassemble the unit, that's is simple engineering!
I’ve been recommending this as a solution for my friends up North - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yPAPBQVvm1s.html Or you can pull the pump/pipe, drain then reinstall. Prime as needed for water. Repeat.
The auger I use by Seymour, the AUA2, has been rebranded as the Seymour Industrial S500 Iwan-Adjustable Auger SKU: 21326. If you can’t find it locally it can be purchased here - seymourmidwest.com/21326 - use code TigerCreek20 and get 20% off. Here are a couple videos about how I built my auger. Auger build - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dzIgMPACjCI.html Initial auger build - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--nN8-Aso5b4.html
I used to work for a environmental, infrastructure and mineral exploration drilling company. A few of us would use welding rods and we could locate hidden wires in the ground prior to doing any drilling.
You've got a great idea with it and I'm confident that you'll do some tweaking on it and make it work better. Sure saves climbing on and off the tractor a bunch of times.
