$60 RUSTOLEUM PAINT JOB STEP BY STEP HOW TO LET'S LEARN TOGETHER!!!

Подписаться 10 тыс.

Просмотров 193 тыс.

50% 1

6 MONTHS LATER UPDATE!!!!
• $60 paint job update m...
Full finished Walk around video click here split into 2 parts over a weekend thanks for watching
• $60 RUSTOLEUM PAINT JO...
While there are much better options on the market in automotive paint this is by far the most basic budget friendly paint job. Check out my follow up video to see the full results!!!
You can use hardeners in it
You can clear coat it
You can add pearls and flakes
Check out my other vids to see all the fun things you can do with rustoleum!!!!
Thanks for watching!!!!
LEARN TO PAINT CHEAP AND EASY WITH RUSTOLEUM!!!!!
OTHER MATERIALS USED IN THIS VIDEO
EMBLEM REMOVAL WHEEL - amzn.to/49eTvk3
TAPE - amzn.to/4bi1fng
PLASTIC - amzn.to/3HAtpvR
PAINT THINNER - amzn.to/3SivEcd
PAINT CUPS - amzn.to/48QBSHs
TIRE COVERS - amzn.to/4betJhu
WHITE RUSTOLEUM PAINT AND ACETONE
PURCHASED AT LOWES HOME IMPROVEMENT
WANNA USE THE PAINTING GEAR I HAVE?
SPRAY GUN SET UP - amzn.to/3TTm1mM
HOSE SET UP - amzn.to/4aXAZhy
AIR FILTRATION SET UP - amzn.to/48NTjrF
AIR COMPRESSOR SET UP - amzn.to/48vO68d
GREAT ALTERNATIVES IF YOU NEED IT CHEAPER????
GOOD BUDGET LVLP GUN SET UP - amzn.to/4aXkimk
GREAT BUDGET AIR COMPRESSOR - amzn.to/3O18eXx
WHITLEY AUTO WORKS OFFICIAL WEBSITE 😎👍🔥
➡️ / whitleyautoworks
INSTAGRAM 📷
➡️ / whitleyautoworks
TIKTOK ⏰🎥
➡️ www.tiktok.com...
MERCH 👕👟
➡️ www.bonfire.co...
👍➡️💯🙏 #WAWGANG
GOD BLESS YOU ALL!!!!

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 472

@WHITLEYAUTOWORKS Месяц назад

How has it held up after 6 months? Check it out!!! ru-vid.comd0F2Vaj0cXc?si=qZSEb3bBS4NOuEKw Full review video walk-around Check it out!!!! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZhOWKgcidX4.htmlsi=y6pG38zxpoqlKywr

@scottprofitt1065 6 месяцев назад

You can add some acrylic enamel hardener and mix 4:1:1 it will dry faster and more durable

@bertbckrs3524 8 месяцев назад

should use hardener, makes it glossier and of course much durable...

@TheREALOC1972 4 месяца назад

Hardner makes it dry too fast and makes it brittle, a little thinner is o.k. but hardner makes it too hard.

@eastcoastken 7 месяцев назад

The thing I've learned about painting is mixing ratios are solid guidelines you can deviate from dependant upon your equipment, method, and comfortabilty of spraying.

@Mr7352 Месяц назад

Great video, great job.. Now i know How to mix and spary Rustoleum paint. Thanks.

@RobertRandin 25 дней назад

I'm going to try to do my own paint job on a restoration Datsun 280ZX and I love your video you know what you're doing you're very honest you'll explain it well I'm going to subscribe and when I do paint it I'll send you a video

@WHITLEYAUTOWORKS 25 дней назад

Definitely do thanks for watching!

@thatguy6828 3 месяца назад

I sprayed a 1 ton truck with rustoleum in the white years ago and the only problem I found with it was it looked like it was fresh out of a hospital. I came back and did some red and black pinstripes and that was tons better, to me. Very nice job though and for the “hospital” white 😂🤣 it does look great. I give it a 5 for the work you put into it but the color I have to say it’s a 3. Just my opinion but it needs something else with it to offset all that white. To each their own, right? Awesome job though

@TheREALOC1972 4 месяца назад

I'm getting ready to do this on the 2008 Impala I just bought, I live about halfway From Phoenix and Tucson and the sun has absolutely destroyed the paint on the top half of the car so since it already needs painted I'm going to 2 tone it, from the top of the fenders down I'm leaving it the factory Precision Red and from the top of the fenders up I'm going to paint silver but not the regular silver, I'm going to buy a pint and add a quarter pint of black paint in it then paint it I want it darker than the silver aluminum color but the other silvers they sell is too dark so I'm going to custom mix my own color.

@jeffnations6649 6 месяцев назад

That cars paint job is perfect. Doesn't needed painted!

@seanseoltoir 2 месяца назад

Some people just don't like gray / silver colored cars... Or it's possible that the clearcoat was coming off and you just can't see it in the video...

@aetransam 8 месяцев назад

don't mean to be negative but that has some chunky orange peel. probably should have done a test panel and got the thickness of the rustoleum dialed in. but not bad on the spraying. keep it up

@WHITLEYAUTOWORKS 8 месяцев назад

Nothing that can't be wet sanded and buffed out but yes I had to dial the gun back from a previous job thanks for watching

@jeepinspence 6 месяцев назад

I’d like to see it completely finished and ready for delivery to get a true finished look. Thanks

@WHITLEYAUTOWORKS 6 месяцев назад

Check out the very next episode after that one where I do a complete walk-around thanks for watching

@WHITLEYAUTOWORKS 6 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZhOWKgcidX4.html

@hanknipper3921 8 месяцев назад

Great job! And a great video my brother!

@richardbonini4121 8 месяцев назад

Great job!!! If you were to shoot clear over the white would you wait 24 hours then shoot it with clear. Also,do you have to sand it before shooting the clear?

@WHITLEYAUTOWORKS 8 месяцев назад

No I would just wait for it to completely flash off and then I start applying the clear coats thanks for watching

@raymaccord7463 2 месяца назад

Very nice thank you very much for the video.

@RickeyWG 4 месяца назад

Fling green in the chameleon is green, blue, gold and red

@elainec2577 Месяц назад

How do you thin enamel acrylic paint ?

@WHITLEYAUTOWORKS Месяц назад

Acrylic enamel paint is thinned with reducer but Rust-Oleum is thinned with acetone or paint thinner thanks for watching

@jagerk9 Месяц назад

With hardener added how long before you can wet-sand any orange peel and polish?

@WHITLEYAUTOWORKS Месяц назад

I would still give it a week to cure out good the longer you wait the better but you should be plenty good by then thanks for watching!

@wxdad6256 4 месяца назад

Do you clean your spray gun between coats? Im learning to spray Rustoleum for a cheap older truck and like how cheap it can be done.

@WHITLEYAUTOWORKS 4 месяца назад

I don't particularly clean my paint gun between coats I do clean it when I transition between paint and clear coat though and I take it apart and clean it thoroughly

@xiaofengxiaofengxiaofengxi4651 2 месяца назад

Too bad nobody has a garage like this in the UK to actually do this job. Only paint I ever trust to spray is clear here just because at least it won't get white splatter on everything else in the wind lol. Only ever use rattle cans too, headlights etc. I literally rolled on the metallic paint on the bumper of an old suzuki recently because of this just because there's nowhere to really spray red here. Looks nowhere near correct close up but give it 10ft and it looks good at least compared to having all the paint peeled off.

@WHITLEYAUTOWORKS 2 месяца назад

Appreciate the comment thanks for watching

@kevincutler8894 5 месяцев назад

2 to 1 mix ratio usually works well. You want to be 18-20 seconds on a zahn cup for viscosity. A good enamel reducer works better than acetone. Xylol is an enamel reducer if you don't want to use an automotive reducer. Add hardener if you wish. And please, use a strainer when filling the gun.

@ahmetyilmaz1593 4 месяца назад

I was wondering if I can use airless sprayer to paint my rv with this paint

@WHITLEYAUTOWORKS 4 месяца назад

Yes I've seen people do it I've just done it through a hvlp gun thanks for watching

@markbrown1609 Месяц назад

no hardner? i have seen some do some do not..i know one big advantage of rusto job is not using toxic hardner

@tommak6516 12 дней назад

From what I could see the original paint looked OK. Why paint it again ?

@WHITLEYAUTOWORKS 12 дней назад

I agree but she wanted the car white so we painted it thanks for watching

@RickeyWG 4 месяца назад

Do you just put the chameleon pigment in clear and spray it on

@WHITLEYAUTOWORKS 4 месяца назад

Yes and then you can seal everything with clear as well

@RickeyWG 4 месяца назад

So you still gotta clean it when ur done

@WHITLEYAUTOWORKS 4 месяца назад

You don't have to I've done it both ways and it holds up fine but I know some people just want that extra layer of protection

@kfuhs696 6 месяцев назад

i know you dont necessarily need it, but why no hardner?

@WHITLEYAUTOWORKS 6 месяцев назад

The car was going to sit for a few days and typically Rust-Oleum dries out completely under ideal temperatures in a day or two without hardening additive so it wasn't really a big deal

@chazzx7897 18 дней назад

Hyundai can learn a thing or two from you on how to properly paint a car white without it flaking off after 7 years. lol

@michaelchaney3101 Месяц назад

Is that single stage?

@WHITLEYAUTOWORKS Месяц назад

You can pretty much think of it as a single stage paint but you can also add clear coat pearls all kinds of things if you want check out some of my other videos and thanks for watching!!!

@keving2371 6 месяцев назад

What about the door jams ?

@WHITLEYAUTOWORKS 6 месяцев назад

They were left silver per the owners request and budget. Looks fine tho check out the follow up video to see the full walk-around thanks for watching

@vidmantassmigelskas315 3 месяца назад

What about clear coat?

@WHITLEYAUTOWORKS 3 месяца назад

You can use 2k urethane clear coat over it just wait an hr after your last coat of base till the paint is tacky to touch but not pulling paint off on your finger thanks for watching

@selvinperez5665 5 месяцев назад

Is this paint from Home Depot rustoleum?

@WHITLEYAUTOWORKS 5 месяцев назад

Yes professional oil based enamel

@selvinperez5665 5 месяцев назад

Thank you very much

@bobbydoll7204 8 месяцев назад

can you now put urethane clear on it ?

@WHITLEYAUTOWORKS 8 месяцев назад

Yes you can check out my $200 rustoleum colorshift paint job video that was done with 2k urethane clear coat and thanks for watching

@WHITLEYAUTOWORKS Месяц назад

Yes if you go back and sand it you can clear coat it thanks for watching!

@johnnoble5644 6 месяцев назад

What about a clear coat

@WHITLEYAUTOWORKS 6 месяцев назад

Does fine without it but I recommend 2k urethane clear coat thanks for watching

@susanreid3146 7 месяцев назад

Why not show it after you remove the tape etc.

@WHITLEYAUTOWORKS 7 месяцев назад

I uploaded the video same day so I'll do a follow up in a few days with it all back together so stay tuned and thanks for watching

@briananderson4552 6 месяцев назад

If you where Chasingthe wite line ya wouldn't be tired lmao....😅

@rongamble9884 6 месяцев назад

You people realize these paints don't have to uv property to protect and last very long

@WHITLEYAUTOWORKS 6 месяцев назад

Check out my 4 and 5 yr rustoleum paint job reviews and thanks for watching

@rongamble9884 6 месяцев назад

@@WHITLEYAUTOWORKS however I do use alot of rustoleum semi gloss black with hardener for frames firewall engine compartment

@WHITLEYAUTOWORKS 6 месяцев назад

Yea I just see people spending thousands of dollars getting their car wrapped these same colors when somebody could easily walk right up and scratch or peel that off so if I can give someone a cheap alternative that'll last them a couple years if properly maintained for less than $100 in basic materials it's worth it I think LOL

@donaldfrederick1557 6 месяцев назад

Wanted to see the finished car out in the sun. 😢

@WHITLEYAUTOWORKS 6 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZhOWKgcidX4.html is my full walk-around video for the car thanks for watching

@jimzivny1554 6 месяцев назад

I've never used 600 directly before paint, I was taught depending on the type of paint from 180-320 to give the surface a tooth for the paint to grab. Your paint looks good I'll have to try 600. I'm a lot older than you and learned when we were using Lucite Laquer, Dupont enamel and clear coat wasn't even a dream lol, in fact I still have my Binks No. 7 gun.

@WHITLEYAUTOWORKS 6 месяцев назад

Yes I was always taught no higher than 600 because you need the surface to be able to grip the paint I grew up using Dupont and ppg paints as well.

@greglamar1116 6 месяцев назад

Your not trying to remove the paint just scuff up the clearcoat

@jeffmueller3684 6 месяцев назад

Also learned in 80s with lucite lacquer and Centari. Still have a gallon of black lacquer 99

@WHITLEYAUTOWORKS 6 месяцев назад

Nice we still have some ancient cans of Dupont and ppg hanging around the paint store as well thanks for watching

@torydz 29 дней назад

@@jeffmueller3684 I'm currently (08/2024) doing my 65 Impala with acrylic lacquer. I haven't painted since the early 80's, but I did my 74 Nova and 69 Camaro in acrylic lacquer as well.

@DonaldGMyers 5 месяцев назад

I’d rather hear the compressor than the music

@williambrindley2832 6 месяцев назад

Painted mine this way 18 yrs ago,,cover car on Ol Skool Rodz mag, Sept issue,2013 been in several mags,paint still looks good!!!

@donmelvin7102 8 месяцев назад

Great results ! Gotta love low buck jobs that look this good

@vincemajestyk9497 6 месяцев назад

I 100% agree with you. I would not thin that paint much below 70%. That Rustoleum is best sprayed with as much pigent or material as possible. I've seen the results of thinner coverage. BTW, Acetone is best for thinning for vehicles. Prep is absolutely the biggest part of any paint job. Came out really nice!

@deliveryguyrx 7 месяцев назад

"Budget paint job for the win." I like your style! Subscribed! Bonus points for not getting paint on your hands or that black t-shirt!

@webmastersof 8 месяцев назад

I have used rustoleum paint many times to paint cars. Rustoleum paint also works great as a base coat if you spray it in a satin Sheen and then use an automotive clear coat over it. Works great every time and very cheap and compared to thousands of dollars for a professional paint job

@timsolomon8352 7 месяцев назад

Are some clear coats not compatible with rustoleum? As it's an enamel paint? Isn't there also a cure time before putting on a clear coat? I've always seen enamel lift and wrinkle doing that? Just curious.

@WHITLEYAUTOWORKS 7 месяцев назад

Yes I have experimented with many clear coats that just won't work with Rust-Oleum paint period some wrinkle and some just don't allow the rustoleum to cure out underneath the clear however I've had no issues with 2k urethane based clears which is why I suggest Nason 2k urethane mult panel clear and speedokote 2k urethane clear as I've seen both work without issues over Rust-Oleum paint thanks for watching

@DatMaddahFaka 6 месяцев назад

@timsolomon8352 let it harden and gas off completely before applying clearcoat.

@INDAPINKSHOOTS 6 месяцев назад

@@timsolomon8352 with my experience using rustoleum, was wrinkling appeared when I tried to do a tri coat pearl over it. If I just do clear over rustoleum, I’ve had no problems Using acme finish 1 clear. I’m Not a professional just a back yard dude.

@MichaelWysocki-ks5xt 5 месяцев назад

In Detroit area used to be a shop painted whole cars. Earl Schibe - “ I can paint any car any color $29.95 “ back in the 1960s If you took one in already prepped up and taped off they put some good paint on it. If you let them do it all , good luck.

@rgrg3683 8 месяцев назад

1 to 1 paint/acetone and 20% japan drier hardner ,1.4 tip wide open fan,35-40 psi at the gun,50 psi at the tank regulator👍🛸💨

@WHITLEYAUTOWORKS 8 месяцев назад

Good set up to go by and thanks for watching

@walkerandrews8892 7 месяцев назад

japan drier over regular hardner?

@rgrg3683 7 месяцев назад

@@walkerandrews8892 ive never tried reg. hardber ob rustolium just japan drier made for oil based but others might work too,

@natevanlandingham1945 6 месяцев назад

I use regular hardner

@natevanlandingham1945 6 месяцев назад

I thin it around 25-50% myself with acetone. So 50-75% paint.

@coherantbliss3483 4 месяца назад

Great job doing your video. I like your ways of doing them and your attitude :). Just a FYI if you add a "WET LOOK" hardener to your Rustoleum paint it will come out shinier and much harder. I use the Mar-Hyde Wet Look brand by 3M. Yes it adds about $40-$50 to the total cost but well worth it. Yes there is a big difference. The hardener has the UV protection in it too which is important making paint last longer. The hardener also protects the paint from scratching easily. More shine, resistant to scratches more (harder paint) and UV protection. Peace P.S. I tried cheaper hardeners and they didn't make the paint shinier like the Mar-Hyde did.

@WHITLEYAUTOWORKS 4 месяца назад

Good to know, and thanks for your comment. Yes, sometimes I use Hardner. Sometimes I don't. I pretty much did this to show people. You can do things dirt cheap, if you have to thanks again for watching

@jeffjenkins9529 6 дней назад

I agree the pant jobs with oil base paints (Rustolium) looks good but get any gas on it and it breaks down

@fredmo3584 9 дней назад

Honstly other paint brands are over priced this is $20 a gallon at home depot and the paint quality is good

@Grams79 13 дней назад

I'm painting another today, finished several in the past with spirits at 7:3 with no issues. HF cheap gun. Outdoors. Wet-sand to perfection. Trump 2024!

@FasterBastard1 8 месяцев назад

Rustoleum single stage on my truck is holding its own after 10+ years

@imaouima 2 месяца назад

No problems with UV? I know some ppl will spray clear over for that.

@FasterBastard1 2 месяца назад

@@imaouima I have a short of my truck from last year on my channel. Couple spots on the hood have started to haze, and the primer failed above the driver door handle and caused some cracking but that was my fault. Rustoleum professional + tractor supply hardener sprayed from harbor freight gun and pancake compressor in 2015. Lives outside in southern KY, driven almost daily. Waxed a couple times a year.

@WHITLEYAUTOWORKS 2 месяца назад

@imaouima I've had various colors last four or five years without issue with no clear coat but obviously clear coat will definitely give you the peace of mind of not having any issues with UV protection and give you a much deeper longer-lasting gloss thanks for watching

@gladememmott3001 6 месяцев назад

Thinning it depends on s slew of different things like where you live, humidity,wheather, and who knows what else. Do wgat works best for you to get the best possible finish you can get. Test panels maybe?

@Chubbycat747 4 месяца назад

How long on average will this Rustoleum last in a hot climate with a lot of sunlight/UV? I would like to try this, but I was under the impression that "real" car paint was made to withstand sunlight longer. Would a 2k clearcoat help?

@WHITLEYAUTOWORKS 4 месяца назад

I've had basic Rustoleum paint jobs like this last for 4 to 5 years but yes adding a 2K urethane clear coat would make it much more durable against UV and just overall make the paint job last longer thanks for watching

@Paper452 7 месяцев назад

Love seeing these cheaper solutions, getting ready to paint my jeep with Krylon farm paint... kinda worried about spraying it. not sure how to mix it but thinking 60/40

@mickmandela6995 6 месяцев назад

Mix a small batch and spray on a sample piece then you can see how it’s flowing another thing you can do is get a paint cup and time the paint one very important step is strain all paint when putting in the gun gets all the impurities out of the paint

@Lastcallrepent 4 месяца назад

Roll it with foam rollers my wife did a great job 👍

@danielkoch6815 4 месяца назад

When I've brushed on Rustoleum white directly out of the can, I found it yellows over time. Will that happen here?

@WHITLEYAUTOWORKS 4 месяца назад

I've never had any issues with it yellowing now I have seen issues with people using certain microfiber cloths and the color from the cloth bleeding onto the panel and then coming through in the paint that's why I don't use dyed microfiber cloths. Aside from that I've never had Rust-Oleum yellow over time I have seen clear coat do that though

@cherubinyo8651 8 дней назад

Can you reduce with speedokote universal urethane reducer SMR870 ? I seen you mentioned that you can use speedokote clear afterwards. Just wondering about the reducer, I've got quite a bit left over from a previous paint job. Great job by the way

@WHITLEYAUTOWORKS 8 дней назад

Yes I've seen many ppl use reducer to thin Rustoleum without issues thanks for watching!

@vegasfordguy 6 месяцев назад

Why didn't you fix the dents before spraying? This is something I've noticed with the Rust-Oleum paint jobs on RU-vid, nobody seems to do bodywork. It does look pretty good for $60 bucks for sure.

@danielhall6397 3 часа назад

not white looks very good Dan

@stevepratt7959 8 месяцев назад

Came out great did you do jams cause if you didn’t I would love to see how you backed masked for my upcoming project thanks

@WHITLEYAUTOWORKS 8 месяцев назад

I didn't do the jams on this one the transition from the white to the silver wasn't that drastic so I just made sure that everything was prepped and clean and taped up the seals etc. On this one but I'll cover my jam masking process in a future video thanks for watching and commenting!!!

@kitschunpoppedcorn8706 26 дней назад

I've been spraying my service vans with that paint for 20 years. The only problem is it turns a yellowish shade of white within the first year making touch ups noticeable.

@WHITLEYAUTOWORKS 26 дней назад

Yeah you can get by doing it dirt cheap but I always tell everyone if you want to last add hardener and do a 2K clear over it thanks for watching

@bjschrecker7893 16 дней назад

We use farm grade point never had no problems

@freespirit1975 Месяц назад

Is this rust paint really intended for and therefore good enough to paint a car? Would it be better to just buy paint from Eastwood or some other vehicle paint company.

@WHITLEYAUTOWORKS Месяц назад

It really just comes down to what you're trying to accomplish if you just want a basic color and a quick cheap paint job Rust-Oleum works great now if you want something more with a factory type metallic finish then going with an Eastwood single stage kit might be a better option for you it really just depends on what you want out of your paint job thanks for watching!

@81darkrider 2 месяца назад

Know I’m a little late to the party but what’s your recommendation if you can’t get away from high humidity I live in Oklahoma and the humidity is always high

@WHITLEYAUTOWORKS 2 месяца назад

I know this prob goes without saying but I would say try to spray early morning before it gets too bad out I would add an enamel catalyst hardener from tractor supply and depending on the finish you get you can always go back after cut and buff it hope this helps thanks for watching

@jagerk9 Месяц назад

How long should you wait before you wetsand and polish? Painted with hardener and acertone and I have some orange peel.

@WHITLEYAUTOWORKS Месяц назад

I would give it a week before you go polishing on it The longer the better thanks for watching!

@jagerk9 2 месяца назад

Should I use a different mix ratio if I'm painting verticle panels to minimize runs ??

@WHITLEYAUTOWORKS 2 месяца назад

You definitely can it really just comes down to how comfortable you are spraying it obviously Rust-Oleum is tricky in that you really have to lay it down to get a good gloss out of it but you can definitely try thickening up the mix if you need to thanks for the comment and thanks for watching

@floridagunrat1625 5 месяцев назад

Many years ago when I was young, I painted my first Jeep with a Wagner power painter in a gallon of green oil-based house paint! It wasn't great my Professional Standards, but it was actually pretty good and that paint job lasted about 20 years! Not long after I painted another Jeep with the same green paint, but did a better job thinning it to reduce orange peel and get a better gloss. About 10 years later, I painted my Volkswagen dune buggy with yellow Rust-Oleum and was quite pleased with the results. About 10 years after that, I painted the cab on my dump truck with red rust-oleum. I was very pleased with how that turned out. All of this was done outside in the driveway or the backyard, so I had the usual problems of dirt and bugs now it's 15 years later and I've got about five work trucks that all need a paint job and I would like to make them all one color - Rust-Oleum Safety Red! I want to convert a garage Bay into a temporary paint booth. I am curious what you are using for a ventilation fan system to draw away the Airborne overspray?

@WHITLEYAUTOWORKS 5 месяцев назад

I'm actually using an industrial fan that my father acquired from a building that was undergoing renovations before that I was just using a typical tractor supply 32 inch fan with the door cracked LOL but hey we all have to start somewhere right thanks for watching

@floridagunrat1625 5 месяцев назад

@@WHITLEYAUTOWORKS Thanks for the fast reply! I just subscribed and was watching one of your other videos when I saw the squirrel cage blower style fan. I'll definitely be watching and learning more from you, thanks Rat

@WHITLEYAUTOWORKS 5 месяцев назад

@floridagunrat1625 yeah funny thing about that one the previous one blew up on me during one of the paint job videos so I had to upgrade LOL

@HONDA_gAWD 6 месяцев назад

Nice job brother. Thank you for sharing your knowledge.

@mcalvinscott 3 месяца назад

I did my 71 beetle same way. But i wanted a custom color. I bought mixing cups and measured parts of navy and silver. Wound up with a light metallic blue. Did it 50/50 with acetone. Painted it in a garage pushing 100°. That paint dried hard as a rock. And no need to wet sand and polish.

@pcorf 2 месяца назад

I agree. I painted a pair of speakers in an oil based gloss black. Took a few weeks to fully cure but now you just cannot scratch it. Very solid paint.

@KevinBower-xl7tm 6 часов назад

I have a doughnut compressor u think this is ok to paint a car? Thanks

@WHITLEYAUTOWORKS 6 часов назад

Yes I've seen it done many a time You're going to want to use an LVLP gun and really take your time with it but there's plenty of videos out there of people using it Thanks for watching

@joeavery6587 13 дней назад

Are they a difference in color when using rattle can vs spray gun if same color

@WHITLEYAUTOWORKS 13 дней назад

Very little most the colors match up great thanks for watching

@dbc105 8 месяцев назад

Nice job, I wanted to point out the Rustoleum Topside Marine Paint. I used the Navy Color on my Vintage Race Bike and it works well. It does cost a little bit more than Professional but it says on the can there it is UV Resistant. Not sure exactly what that means but it might be something you would like to check out. The downside is the limited number of colors, but when it is just a base color like white it might be a good choice. Home Depot has a good deal on Rustoleum quarts some times when you get a 2/pk they will have a better price though you may have to order it because they may not have it on the shelf.

@WHITLEYAUTOWORKS 8 месяцев назад

Sounds interesting I'll have to look into it thanks for letting me know and thanks for continuing watching

@dbc105 8 месяцев назад

@@WHITLEYAUTOWORKS I enjoy watching because I'm learning and I'm glad to help when I think I can.

@WHITLEYAUTOWORKS 8 месяцев назад

I learn something new with every job I do glad you enjoy the vids gonna do my best to keep them coming

@spoonfind583 18 дней назад

Looks like you have quite a lot of orange peel. Do you color sand it and buff it out?

@WHITLEYAUTOWORKS 17 дней назад

Yes you can but it settles out some as well as it dries thanks for watching!

@workingmansrestorations7071 5 месяцев назад

Looks good. I painted a truck in my driveway and it came out semi respectable

@margarito-yv6np 8 месяцев назад

That's what I'm talking about! Awesome!

@vdubing01 5 месяцев назад

Is there orange peel to deal with?

@WHITLEYAUTOWORKS 5 месяцев назад

The orange peel actually settled out pretty well once the paint job dried if you want to check out the follow up video in the description where I do a full walk around thanks for watching

@sinformant 8 месяцев назад

I know you are doing as requested, but who wants a plain white car with no pearl in it? White is a cheap fleet vehicle color. Just a hair of pearl mixed in would have put it over the top. Not a critique on your work.

@WHITLEYAUTOWORKS 8 месяцев назад

I agree but sometimes I just gotta go with what the customer wanted and I just used it as a great opportunity to show the basics of what you can do for super cheap without all the extras. Thanks for watching

@enjoythesho1992 5 месяцев назад

Car really didn't need paint a good buff job it would have been nice

@WHITLEYAUTOWORKS 5 месяцев назад

Customer wanted a color change I agree it didn't need it but thanks for watching

@davidlaws1438 7 месяцев назад

Looks great man, Awsome job, hopefully this spring I'm going to be trying my luck painting my 2000 Grand prix, black. Watching your channel for tips, Thanks 😊

@yeet_ddogyt3861 2 месяца назад

So no primer at all. Just paint directly on old paint? And does clear help at all or is it kind of pointless. If you would clear what kind? Thanks for any suggestions I’m looking to repaint my 02 Camaro soon and want to know the best/cheapest way to go about it.

@WHITLEYAUTOWORKS 2 месяца назад

If you have any bare metal spots or body work areas I would definitely prime it but the paint was in good shape so I just sanded it and painted over it but you could also use a 2K urethane clear coat over the Rustoleum and it would hold up for many more years I'll include the link to the clear coat I typically use thanks for watching amzn.to/3RZx1Nw

@yeet_ddogyt3861 2 месяца назад

@@WHITLEYAUTOWORKS thank you so much. This helps a ton

@LSEtrucks 7 месяцев назад

Good video, would like to see a more in depth video of how to mix, the 70-30 method isn't really accurate depending on what mixing cup you have. Is that. 1.1 paint ratio or something else? Good video tho. I painted my nova with Rust-Oleum but i feel it could have been better. Just looking for more paint advice

@bigmac7302 16 дней назад

Would you add a clear coat after this process?

@WHITLEYAUTOWORKS 16 дней назад

You can you would just wait 45 minutes to an hour till it's tacky to touch but not pulling paint off on your finger and you're good to go for clear or you would have to wait a couple days wet sand with 600 then clear coat it you could do it either way but I recommend using 2k urethane clear coat over Rustoleum thanks for watching!

@IHFarmer2007 4 месяца назад

4:1 is what I use……you were using percentages, 70/30, would that be close to a 3:1 ratio??

@WHITLEYAUTOWORKS 4 месяца назад

Yes 3:1 or 2:1 is typically the ratio most ppl use but it really just comes down to preference as long as it's not too thick or thin thanks for watching

@IHFarmer2007 4 месяца назад

@@WHITLEYAUTOWORKS thanks for the work you put into doing this!! I’m going to be doing some painting soon on some sheet metal and I’d like it to be right as I have tried most mix ratios with rust oleum. 4:1 is pretty thick and 1:1-2:1 is on thin side, when its that thin I had issues with the paint cracking and chipping really easily with hardener added. Didn’t think I had too much hardener as I just put a couple tablespoons of it in.

@bigal7201 7 месяцев назад

I rolled a old 1966 122 Volvo, I need to send you pictures, before and after...

@salrivera7578 6 месяцев назад

😂😂😂 I paint my Geo tracker 16 valves 96 with Rust-Oleum paint all black but I used a paint roller and I can tell you came out real nice people ask me where I took my Geo tracker to paint jjjjjj I even painted underneath inside wit a half of gallon of Rust-Oleum I still have some left for Nov before winter comes gd job I like better paint brushes and roller nothing fancy old school style

@WHITLEYAUTOWORKS 6 месяцев назад

Whatever gets the job done right good stuff thanks for watching

@salrivera7578 6 месяцев назад

@@WHITLEYAUTOWORKS well Rust-Oleum is a gd paint oil base great for jeeps and trucks underneath inside and outside my jeep is old school style no rug no back seat only 2 seat and homemade bikini renegade style with homemade back window curtain he looks tuff with the tires dp dish wheels and flares and 2 cv antennas on rear plus is a 4 x4 all seasons rascal jjjjj

@1miltond Месяц назад

I have a old car the paint was really bad on the roof and engine cover but I can't buy a new one so Working on signs for 35 years oil-based paint lost for 10 years or more so sand it really good and rolled with R O from home depot put a clear on top is 5 years past and is looking great 3 one quart cans about $35 lots of sanding and spray can primers

@edwardfern4359 8 месяцев назад

Great video. Been following your channel lately and some great stuff! Notice I never see you strain your paint when putting in the cup. Just not showing or you don't? Thx!

@WHITLEYAUTOWORKS 8 месяцев назад

Honestly sometimes I do and sometimes I don't I usually just go with it when mixing and if I notice any issues or something doesn't look right I'll restrain it just to make sure good eye tho and thanks for watching

@claytondewey3367 8 месяцев назад

Looks great was wondering about the jams. I'll be repainting my b250 van this summer. Main color will be metallic ocean blue. Still have picked the stripes style or color yet.👍👍👍👍

@WHITLEYAUTOWORKS 8 месяцев назад

The jams stayed silver this was just a budget color change and the transition isn't bad thanks for watching

@lancegcohen 7 месяцев назад

I have two spray tips for my HVLP gun, 1.4 and 1.8....What tip should I use spraying with the Rustoleum/Accatone/Enmal hardner? Thanks in advance.

@WHITLEYAUTOWORKS 7 месяцев назад

I use the 1.4 tip to spray bases and clears. The 1.8 tip would be for high build primer or heavy flakes thanks for watching

@MarkWilliam-z7t Месяц назад

Do you do any clear coat after or it doesn’t need it?

@WHITLEYAUTOWORKS Месяц назад

You can check out one of my other videos where I do clear coat and even pearls thanks for watching!

@craigiefconcert6493 14 дней назад

This inspired me to do it. I have ably a single car garage with some shelves and the back and on one side in the corner. If I clear those corner shelves I could have enough room to paint half at a time and then pull it out and switch it around to paint the other half 😂😂😂

@seanseoltoir 2 месяца назад

Rustoleum has a hammer-finish oil based paint... It looks great, but one small problem... It is not gasoline resistant... I did a aux tank for a motorcycle with it and found that out after the first fill-up... :(

@papercraneblog 3 месяца назад

I opened my can and it wasn't white like yours??? Same color. Is mine defective?

@WHITLEYAUTOWORKS 3 месяца назад

Stir it up really good the chemicals separate from the can sitting over time

@papercraneblog 3 месяца назад

Thanks for the response appreciate it! Yikes, I already put some on my car before stirring. It didn't work. How do I remove?

@WHITLEYAUTOWORKS 3 месяца назад

Well you can try and sand it off if that doesn't work then you will have to get some paint thinner or acetone wipe it down with a bunch of rags till you get it clean then rescuff it and clean it really good with Dawn detergent and then with a good wax and grease remover and then you can start over

@KRuslan1000 Месяц назад

The truth is 1 month later, this would still be drying if you don't use a hardener. 2nd My experience UV damage. You need a clear coat.

@stevenl34 8 месяцев назад

When I do this and want to use hardener. How much would I use? Would I still mix 70 30 and some hardener? Would the times between coats be different? sorry for all the questions but I am going to try this and want to get it right

@WHITLEYAUTOWORKS 8 месяцев назад

The hardener most ppl use is the majic hardener from tractor supply it comes in a pint and you add it to a gallon but the flash times between coats should be about the same just wait for it to tack touch the paper as long as you don't see paint on your finger your good to go and the mix would stay the same thanks for watching

@stevenl34 8 месяцев назад

Thanks for the reply. I saw that at Tractor Supply just wasn't sure on the amount to add to the gallon@@WHITLEYAUTOWORKS

@jamesbehrje4279 28 дней назад

I paint old high millage work vans with rustoleum all the time. I don't even use an air gun on them. Just a paint roller and some paint cans. I'm not working on vehicles that have to be perfect though. A lot of them are beat up body damage and dents. They're work vans. They always come out looking pretty good though. I would prefer to do the paint job like you did in this video but I work in a garage that is attached to a house and it has valuable classic cars in it sometimes. The owner doesn't want fumes and overspray on everything. It is what it is but Rustoleum works great as a cheap car paint.

@Imnotyourdoormat Месяц назад

*Thats the way it's done ... **_or rather used to be._*

@RickeyWG 4 месяца назад

I had people tell me I could do it with a 3 gallon compresser and come to find out you can’t so now I gotta get a new compresser I just been ran around 1:59

@WHITLEYAUTOWORKS 4 месяца назад

I've seen plenty of ppl doing it with small compressor set ups but you got to use a lvlp gun the hvlp guns require too much for a small set up and most ppl burn them up trying to make it work. Thanks for watching

@BeccaTKawaii Месяц назад

I did not know you could use rustoleum paint to paint a car. I was under the impression automobile paint was special.

@edwinmcnew4389 Месяц назад

Looks awesome! Great paint job!❤

@ClubFreeze501 6 месяцев назад

Nice job my guy. Really nice job …. I’ve. Been thinking bout trying it out on my c10

@nickp3173 4 месяца назад

Came out really good except it has considerable orange peel. Can the rustoleum paint job be cut and buffed like a traditional car?

@WHITLEYAUTOWORKS 4 месяца назад

Yes it can all the same as any other paint job just give it a week or two to harden really good

@nickp3173 4 месяца назад

@@WHITLEYAUTOWORKS I would love to see you do a cut and buff on a budget paint job like this, perhaps with a metal or pearl paint.. To see how good one can truly make a rustoleum job look. That would be must see tv. Thanks for the response! It would probably be easier if you spray a clear over the rustoleum i'd imagine as opposed to cutting the actual pigment layer.

@WHITLEYAUTOWORKS 4 месяца назад

@nickp3173 yes I plan on doing that in the future video and yeah you're right it would have a much better finish ultimately and have much better UV protection if you were apply 2K urethane clear coat to it thanks for watching

@nickp3173 4 месяца назад

@@WHITLEYAUTOWORKS Thank you for the content! I subscribed! Good luck and God bless!