Тёмный

बहाली ड्रिल प्रेस - इंजन के बिना संस्करण 

Dr Scraps
Подписаться 2 тыс.
Просмотров 71 тыс.
50% 1

बहाली ड्रिल प्रेस - इंजन के बिना संस्करण
मैंने एक बॉडी ड्रिल खरीदी, इसे रीसाइक्लिंग के लिए तैयार करने के लिए ओवन में रखा गया था। इसकी कीमत इतनी सस्ती है कि इसने मुझे चौंका दिया - 20$। हालाँकि इसमें चलने वाला हिस्सा नहीं है, मैंने 1972 से एक पुराने इंजन का इस्तेमाल किया। मोटर से जुड़ने की कोशिश करने के बाद इसने फिर से काम किया। अगले भाग में मैंने बिजली को हटा दिया और सर्वर का मैन्युअल रूप से उपयोग किया। मैं एक होममेड सैंडब्लास्टर का उपयोग नुक्कड़ और क्रेनियों में मिट्टी को साफ करने के लिए कठिन क्षेत्रों को हटाने के लिए करता हूं।
गहरा नीला रंग हरे और काले और सफेद रंग से मेरा अपना मनगढ़ंत है। मुझे लगता है कि यह बहुत मजबूत है: डी। नारंगी रंग का संयोजन लाल और थोड़ा पीला है।
सभी विवरणों को इकट्ठा करने के बाद, मैंने पाया कि पैंतरेबाज़ी करने वाला हिस्सा बहुत भारी था, जो पीछे की ओर झुका हुआ था। मैंने ड्रिल पैर को विपरीत दिशा में घुमाकर इसे ठीक किया। परिणाम बहुत अच्छा है। मशीन का कुल वजन ~ 35 किलो है।
यदि आप जो देखते हैं उसे पसंद करते हैं और चैनल के लिए कोई विचार है या चैनल को पुनर्स्थापित करने के लिए कुछ योगदान देना चाहते हैं, तो कृपया संपर्क करें। :)
और हमेशा की तरह अगर आपको वीडियो पसंद आए तो कृपया इसे लाइक शेयर और सब्सक्राइब करें और चैनल को बढ़ने में मदद करें।
आप सभी से जल्दी ही मुलाकात होगी
डॉ स्क्रैप
#बहाली #ड्रिल #प्रेस

Хобби

Опубликовано:

 

3 дек 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 49   
@peeraphon1998
@peeraphon1998 Год назад
Enjoys.
@peeraphon1998
@peeraphon1998 Год назад
Hilite in zone.scant
@garyjones2582
@garyjones2582 2 года назад
Turned out nice.. Ready for many more years...
@zekecorder8226
@zekecorder8226 11 месяцев назад
Nice restoration. I doubt I would have put that much work in such an inexpensive, moderate quality tool. However, it does make me want to do more restoration work.
@ITBR_Restoration
@ITBR_Restoration 2 года назад
Good job, I took a lot of techniques👏👏👏
@HNIZAR45
@HNIZAR45 2 года назад
Nice work
@MechanicalMagraj
@MechanicalMagraj 2 года назад
Nice work 👍
@CraftGentRestoration
@CraftGentRestoration Год назад
It is soo nice..super 👍👍👍
@jaimecostalima5714
@jaimecostalima5714 2 года назад
Very good
@NathanWeld
@NathanWeld 2 года назад
wow so cool
@bendangwatilongkumer4829
@bendangwatilongkumer4829 Год назад
Nice
@celsocorrea893
@celsocorrea893 2 года назад
Trabalho incrível, de restauração. Parabéns.
@u.blitzknaller8978
@u.blitzknaller8978 Год назад
This drill press was and is made in China and sold in many countries with different brands. I also have one of these, bought new, but you have to modify it quite a bit.
@jbdroneaventura9588
@jbdroneaventura9588 2 года назад
Parabéns, show
@PatricioEduardoDevoto
@PatricioEduardoDevoto 2 года назад
Not too much care on details but useful. Congrats!
@jaimecostalima5714
@jaimecostalima5714 2 года назад
Congratulações
@jaimecostalima5714
@jaimecostalima5714 2 года назад
👍👍👍👍👍
@YEMAM1
@YEMAM1 2 года назад
Надо еще покрасить патрон и сверло. Гулять так гулять, провода тоже.
@Tatal.b
@Tatal.b 2 года назад
Muito bom 👍👍👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏🙏🍀🇧🇷
@cokhichetao72
@cokhichetao72 Год назад
Kênh này chung với kênh bán đồ bãi nhật của a hả a
@vicv9503
@vicv9503 2 года назад
it resulted bad because you didn't put muriatic acid first before you tried to fill it with solder. anyway nice job!!
@KennethScharf
@KennethScharf Год назад
Really need a multi-pulley for the motor shaft so can get more than 1 speed!
@robertobezerra8376
@robertobezerra8376 2 года назад
Show de bóla 👏👏👏👏👏👏👏💯💯💯💯💯👌👌👍👍🇧🇷
@puirYorick
@puirYorick 2 года назад
I'm only guessing here but when you prepared your solution for electrolyte rust removal it seems like you put two different chemicals in the water that neutralize each other and make a weaker electrolyte than just the one. As you add the powder and it bubbles up before the electricity is on. That means the two substances are canceling one another until the weaker one is consumed. Maybe I misunderstand what I saw. If so I apologize.
@drscraps
@drscraps 2 года назад
I use toilet bowl cleaner in combination with baking soda. To be honest, I don't understand much chemistry and I did it unprofessionally as you can see.
@puirYorick
@puirYorick 2 года назад
@@drscraps Baking soda, also known as sodium bicarbonate, has a pH of 9, making it a mildly alkaline substance. Toilet bowl cleaners could be either acidic or alkaline with pure water being exactly 7 or neutral. By mixing the two, you either made an already alkaline cleaner slightly less powerful by adding a weaker alkaline baking soda to it OR you made an acidic cleaner become more neutral by canceling some of it with that alkaline baking soda. The foaming suggests that it was the second case. I'm happy that you are open to learning and researching practical knowledge. Be safe. Mixing common household cleaners can create deadly fumes. I won't mention a famous example in case some kids read this and are unsupervised but please research first and use a well-vented workspace when mixing. NOT mixing is your better option. A search engine can direct you to a reputable site with a good method for electric rust removal but beware that bad advice is also out there.
@Dx20xygen7
@Dx20xygen7 2 года назад
The end result turned out amazing my man, I really liked the paint job on that too. You even came up with a fancy switch and a case to cover the belt! Great job mate, keep it up
@drscraps
@drscraps 2 года назад
Спасибо за вашу поддержку. Я постараюсь, хотя знаю, что это видео не очень понравится зрителям, потому что в нем слишком много технических ошибок.
@glengrossnickle4985
@glengrossnickle4985 2 года назад
Very good job. Liked the colors. I have one that is that rusty. I got it at a auction very cheap so I can put time and a little money into it. Hope I can get it as good as yours. Need a suggestion it is also a table top like yours. Thought I might convert it to a stand alone. Add a longer pipe. But not sure if that is a good idea. What do you think? I read some of the comments and you said you were having trouble getting parts because of covid. Just curious where do you live? Stay safe from covid and have fun with all your projects. Thanks
@drscraps
@drscraps 2 года назад
You should upgrade the pipe to be taller and longer. It will be very convenient to use together with eto ( VISE ). Here I used the original tube and is 70cm tall. The working space when the 13mm drill is installed is ~15cm. It's really confusing. If the materials are available, upgrading the pipeline is the best thing.
@drscraps
@drscraps 2 года назад
Where I live is Vietnam, a very beautiful and friendly country with all friends in the world. Until covid 19, we all voluntarily follow the direction of the government such as staying at people's houses, not holding events, opening for tourism .... In which traffic is also limited.
@mohamedzulkifly8966
@mohamedzulkifly8966 2 года назад
Where are you from brother?
@drscraps
@drscraps 2 года назад
I come from Vietnam, a small, beautiful and lovely country
@manuelurdaneta8649
@manuelurdaneta8649 2 года назад
Why didn't you put the other pulley with three levels, for speed changes?
@drscraps
@drscraps 2 года назад
The current covid 19 epidemic in my area is very complicated. Traveling or buying things online is very difficult. All I do is just recycle old stuff. I made my own wooden pulley with 3 levels but the conveyor belt is very poor but still have to use. Hii
@Hamburg6789
@Hamburg6789 2 года назад
😍💖👍
@jiggidyjam
@jiggidyjam 2 года назад
Flux when soldering!
@ruggy6668
@ruggy6668 8 месяцев назад
La domanda non è come si fa a restaurarli, ma come si fa a ridurli così. Il mio ha più di 20 anni, lo uso spesso ed è sempre in ottime condizioni.
@erdinckaratepe1666
@erdinckaratepe1666 2 года назад
👏🏻👏🏻🇹🇷
@sambasivaraorao8862
@sambasivaraorao8862 2 года назад
Under quality restoration
@shlossu6825
@shlossu6825 2 года назад
Якорь имхо зря покрасил, он же греется как печка(под нагрузкой), ухудшил теплоотдачу, да и вонять эта краска будет...
@drscraps
@drscraps 2 года назад
Ты прав. Я был неправ, что не узнал об этом первым. Это спасает меня от ошибок в будущих проектах.
@jafoste142
@jafoste142 2 года назад
Não sabe soldar, betum mt mal passado, pinta parte de dentro do motor e ventoinhha isso não se faz
@drscraps
@drscraps 2 года назад
No começo eu pensei que soldar era fácil e estava completamente errado. Até hoje, ainda estou tentando aprender.
@jafoste142
@jafoste142 2 года назад
Sim normal com pratica que se vai la mas o resultado ficou muito bom mesmo com essas falhas ficou bom
@thien8artdesign
@thien8artdesign 2 года назад
It's not pretty, the way it's done is sloppy
@drscraps
@drscraps 2 года назад
Tôi là người mới làm về phục chế và kỹ thuật còn kém. Tôi đang cố gắng học hỏi và cải tiến. Cảm ơn ý kiến thẳng thắn này.
@KOKO-jo6ty
@KOKO-jo6ty 2 года назад
like a parrot!! why that colors??? ugly! are you painted the working table?? replace bearings???
Далее
Стас о своих клиниках
00:19
Просмотров 89 тыс.
ЛУЧШАЯ ПОКУПКА ЗА 180 000 РУБЛЕЙ
28:28
Rusty Press Restoration
16:11
Просмотров 740 тыс.
Old 1930 Electric Motor (OLD TOOLS RESTORATION)
27:29
Worn Out Pillar Drill Restoration - JUMBO Episode
41:39
Rebuilding a drillpress spindle
41:44
Просмотров 102 тыс.
Old Rusty Drill Press Restoration - Restore Drill Press
15:59
телега - hahalivars
0:12
Просмотров 2,2 млн
Easier when using this tip
1:00
Просмотров 19 млн
Дети взломали аттракцион😱
0:21