⫷ 4L60e Harsh Shift, Shutter, 1 - 2 shift problems. 1-2 Accumulator Check and Replace ⫸

Подписаться 47 тыс.

Просмотров 244 тыс.

50% 1

4L60E transmission has problems shifting into 1st or 2nd gear? Maybe your shift from 1st to 2nd is really sluggish? Maybe your Accumulator is the issue.
Donate:
Paypal.me/ScottiesHusstle
$ScottiesHobbies
Want to send us stuff to try:
Scotties Hobbies
2455 N Naglee Rd #143
Tracy, CA. 95304
listen on spotify: spoti.fi/3nQbXbk
Check out Website: www.ScottiesHobbies.com
Facebook.com/TheRealScottiesHobbies
Buy Sonnax Pinless Accumulator:
Ebay: ebay.to/2M1YOw4
Amazon: amzn.to/2LUNPFC
Buy OEM design Aluminum Accumulator:
Ebay: ebay.to/2Od2ngp
Amazon: amzn.to/2ncxhKc
4L60E series transmission have problems shifting into 1st or 2nd gear? Maybe your shift from 1st to 2nd is really sluggish? Or maybe you feel like you're towing when you're in first or second gear? What's the 1-2 accumulator going bad you can have many symptoms that can be caused by a defective piston in the 1-2 or 3-4 accumulator. I always recommend to replace the factory plastic piston with at least a OEM quality or design aluminum piston if you do not want to go over to the Sonnax pinless piston.
Check out ScottiesHobbies.com soon. I will be posting a blog that has a little more info in it such as bolt head sizes and torque specs.
outro credit:
EPICmoh Gaming
goo.gl/7wpdTg
Retro 80's Funky Jazz-Hop Instrumental (Copyright Free) Music - Sundance Remix (Extended Version)
• Video This site contains affiliate links for which I may be compensated.

Опубликовано:

3 авг 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 246

@lashaunepeterson9627 4 года назад

Your videos are so helpful!! I'm keeping my tahoe running with watching your videos. Thank you!!

@nikkolaus2227 3 года назад

Thanks for looking out for all us GM lovers worked like a charm for my 1999 GMC Yukon SLE changed accumulator and both solenoids😎👌

@l963nnn2 4 года назад

Good info. Thanks now i can fix my transmissions accumulator. 👍👍👍

@ktotheswiss1617 5 лет назад

I had mine rebuilt, Top to bottom, it still slams like a shotgun from 1st to 2nd.

@mattwest4346 4 года назад

mbw635 Scotties was spot on with the accumulator repair. My 2009 Colorado 2WD pickup was hard shifting on the 1-2 shift. I chnaged the trans fluid, sourced the AC Delco part from his link, Amazon prime shipped it next day, and the problem is gone. My bracket for the shift linkage was held on with two 13mm bolts, and the pan came free very easily. Gasket & Filter set I used was WIX. Thanks Scotties!

@ScottiesHobbies 4 года назад

Hell yea! Glad to help brother. Good job gettin in there and getting it done.. people always ask if this or that is easy, I tell everyone that it's easy as long as you have the patience. Good job and thank you.

@innovativeintelligence4172 3 года назад

Ya my avalanche Trans lasted till 250,000 with the hard 1 to 2 shift, That one was from GM. My Silverado is starting to get the hard 1 to 2 shift , I am going to put a Accumulator with metal parts. Plastic just does not stand the test of time , this helps alot , this part is not very expensive either.

@yourface3154 4 года назад

1st is starting to slip like I'm on ice, does it need a rebuild? Or just an accumulator replacement?

@Beatvictor 19 дней назад

I've been working on LS1 firebird with a 4L60E and I've been having the issue where the car jerks when I put it on reverse or drive but after I run it for a while it goes back to normal. This video gave me hope to fix this issue so thanks for the tips!

@robinturner6639 Год назад

Great video.In My 4L60e,in my 2000 Chevy s10,I was driving and noticed it slipping a little.All of the sudden it quit pulling.Like it went to neutral.Next day it worked until it got warm,then nothing.What you think.

@Sluders_slow_shop 4 года назад

I have an issue with a 97 silverado with the rough shift going from park, 1-2 is rough, and sometimes when downshifting from 4th to 3rd, it seems like it's missing the gear and hitting neutral.. I bought the truck with a "15,000 mile rebuilt transmission"... how boned am I?

@daviddeleon633 4 года назад

Hey there @scottieshobbies i was having this shutter problem and harsh shifting and all of a sudden i lose all of 1st super randomly any idea if its just the accumulator stuck?

@smokinjoes9383 5 лет назад

Quick question, same transmission in my 2005 CTS 3.6 I’m noticing a harsh shift from 3rd to 4th what’s your thought ? Thanks

@Istayuplatedrivefast 4 года назад

I have a 93 k1500 with the 6.2 diesel. When taking off from a stop it clunks like if it had a manual trans and you popped the clutch. It doesn't clunk in reverse and when you shift the trans into 2nd gear and take off it doesn't clunk either. It almost feels like it shifts into neutral when you come to a stop then once you start rolling again it drops back into drive.

@bentolman514 4 года назад

You seem like you know your GM transmissions. I have an 88 one ton two wheel drive that is stuck in first gear. Any ideas? I have park, reverse, neutral and drive but it won't shift up I can't even manually select second gear inn the column. It just stays in first.

@larrygregory7794 5 лет назад

My truck GMC Sierra k 1500 has 4l60e in it when I push on the throttle the truck was just red line until I and it won't shift and when I let off the throttle shift I'm going to the lake to drive what was the cause of this I've already changed the shift solenoids

@traviscoxgames2270 5 лет назад

I got a tx700 transmission in my 92 Chevy suburban and it has a hard 1-2 shift and sometimes it seems to hit a neutral then it goes back into gear. Do u know what it might be

@fivestarhemi2877 3 года назад

I have a 2008 gmc yukon slt and it tends to jerk/jump when turning left or right slowly. But when in straight rd it drives just fine, i dont hear any clunking or differential noises or trany codes on the cluster. Someone told me to replace the mass air flow sensor even though the mass does not show in a check engine light... any ideas what it could be? “Help”

@jackalger1229 5 лет назад

I have a 2002 Silverado 4X4 serviced the trans changed filter and gaskets, ran in in the air to make sure I had shift point and checked make sure trans fluid was at normal level, Shifted fine revere also, let it sit over night put it on the ground and now it wont go, the shift indicator is not registering when i put in in drive, but does indicate PK R & Neutral, drain fluid re pulled pan to make sure filter didn't come off it was fine. have any ideas, does the indicator have to work for the transmission to work?

@blkrck 2 года назад

I have an 08 Silverado that when going from park to drive a very hard engagement occurs, no other hard shift issues only when leaving park and going into drive does the hard engagement occurs. I have not found any posts online with these same symptoms. Looking for some help, thanks

@wolfpup7901 4 года назад

I have 4l60e in a 2000 Silverado. It won't go when you put it in drive but when you put it in 1 it does fine. All other gears are fine. We changed both the silinoids mine as well since we were in there) and still nothing. What can I do?

@james10739 5 лет назад

Can a bad accumulate cause 1-2 shift to be smooth or not really happening and some slip in 2nd because i had installed a corvet servo and it was fine and firm then this happened 4th feels fine i had actually ordered the transgo shift kit that i had planed on installing but i prdered the pinless upgrade pistones looks like 3 of them so probably get them Friday and do it this weekend

@treslongwell1332 10 месяцев назад

so don't worry about the 3-4 accumulator? I don't wanna drop the valve body. Scared to go that deep. The FWD one looks easy. Would it be dumb to replace just the 1-2 and FWD? Upgrading to pinless.

@richardb9779 5 лет назад

I have a 2007 sierra 4x4. Hard shifts from 1st-2nd. only codes I get are po172 and po175 system rich. Hard shift intermittent. Banner Chevy changed TCM problem still exists. They pulled code p2544, u0100 loss communication with TCM. Any advice at all. Could a sensor be causing this or a bad wire harness?

@rodneygriffin5350 4 года назад

Hey?? I'm in need of your help to get that part 1--2 shift ? Are lead me in the direction to get that? You will be very appreciated?? Thank you

@micthegreasemonkey2918 3 года назад

Hay Scotty whats up? Somebody recommended flipping the Acc piston over ! Cant rember which one thou may hav been the 1-2. Should i do this to my 4l60e?

@rustbeltgypsy3713 2 года назад

Have 1999 S10 w/4l60e...it shutters only in 1st at take off...then shifts smoothly/properly through all gears, only shutters slightly from complete stop to go...is this also an accumulator issue also? Thank you

@genen.7370 3 года назад

Thanks for all your informative videos. I have a question you mentioned if chasing a hard shift issue check the electronic power control solenoid. How would I check or test test Solenoid? And if it is bad do you have a link for this EPC solenoid?

@DM-qp7do 2 года назад

So I need to do this to my 07 Classic, what else should I replace while I'm at it. Eventually this trans will be gone but for now I'd like firm shifts for just the 1-2 and 2-3.

@waltbuggy 4 года назад

What would cause my 99 chevy Express 2500 4.3 to jerk while accelerating between 50 and 60 mph I have no codes and it runs fine shifts to reverse and drive smooth but jerks lightly while accelerating at highway speeds help please

@robpaul7900 2 года назад

Are the accumulator housings ending in 428 and 937 interchangeable they are the same size pin.230 937 is alittle newer style I believe but almost identical. Can I use a 428 in place of the 937?

@serrithapeterson2681 4 года назад

My Jeep when shifting from 1 to 2 it kicks almost like a whip lash kinda motion if that makes sense I’m at a loss

@borndifferentnf1 2 года назад

My new Automatic Transmission 1-2 Accumulator came with piston down inside of it I heard people say it needs come up and put your old springs in new one but place I got the ome one from says there all ready in there dose the piston come up by it's self?

@lilibethdoherty295 3 года назад

This is sad at 63K my 05 colorado bangs into second gear, while my 81 oldsmobile with 385K shifts perfectly!, they don't make them like they use to.

@Mike_hocksbig69 2 года назад

Sounds like you haven't cared for the 05 Colorado. Unless you've had the 81 since new, I'd say the previous owners took good care of it before you got your hands on it

@lilibethdoherty295 2 года назад

@@Mike_hocksbig69 The Colorado has had kid gloves since new just like my 81 Olds and 73 vette, 85 380 sl and 88 Town car. They are all still keepers not like my 68 Cougar 81 trans am and 86 vette they were the ones that i could not mechanically connect with and have been gone from the stable nearly forty years!

@isaiahhoffer9507 2 года назад

So true it's very sad

@youzen8606 2 года назад

hi im having hard shift on a 2015 escalade 4x4 - does it come with this accumulator?

@frankbatiz8908 2 года назад

I follow your videos, I have do ne a lot of thing to fix my 1-2 hard shifting in my 05 suburban 4l60e. I have replaced the piston accumulator for the double O ring aluminum one and replace the pressure solenoid and I still have that hard shift from 1st to second. Also from park to gear . Need an advise please

@macknumber9 Год назад

Check engine and transmission mounts

@miguelemolina1442 5 лет назад

Good video bro I'm gonna check it out do you think the valve body can cause the same issue hard shift from 1 to 2

@ScottiesHobbies 5 лет назад

Make sure the valve ports and shift valves are clean. back probe and 9v test the shift solenoids while in there.

@alphagaming7267 2 года назад

I have a 96 GMC Sonoma 4wd 4.3l v6 n my transmission goes into gear but has very slow start wen pushing the throttle, rpm will go to 2k before the truck starts to move, once it goes it shifts fine n gets to speed no issues, is that my 1-2 clutch's going out or no?

@hw5091 2 года назад

Any advice on a what seems like a slip after warmed up to about 160f on trans, from a stop, or p to d, 3 or 1. Then I have to tap the gas to get it to what seems like fall into gear and then move like normal. It does not do it when starting in 2 or reverse. A local shop rebuilt it 50k ago (before I got the truck). I was thinking maybe forward accumulator piston, can you get to that without removing the valve body (I have an 08 silverado)? I know the screws are in a tight area there. But maybe the forward accumulator is fine because when starting 2nd it doesn't need a bump. Only other thing I can think of is it's fucked internally. Any thoughts?

@rockabichebel 2 года назад

hello plz I have 4l60e on 6.0l gen 3 I have a transmission problem R n 1 working verry well 2 n 3 n 4 don't have a power on hight Rpm more than 2000 start to slip when I give a little throttle more than 2000 rpm starts to slip shifting down slow shifting a little by hand i have slow shifting between 1 n 2 , 2 n 3 , 4 with slipping when rpm start to more then 2000 I have rebuilt you think torque convert ? thank you

@kgreersf Год назад

How do I check the electronic power control solenoid? Too bad the video just says to check it. Now I'm worried about something new and I still barely know how to install a new accumulator. 😂

@5475522 3 года назад

With the spacer or without the spacer confused me into thinking it popped out and could not find it back. Turns out after hours of looking there was no spacer in my tranny. M ust be a difference between the 4l65 and the 4l60 . Maybe it is the year that makes this difference.

@romeroboissiere2278 Год назад

Is the forward accumulator and 1/2 accumulator the same size

@williesworldofwheels 5 лет назад

Question that you didn't answer. What if you have it in low or 1st gear and want to hold it in that gear but it keeps shifting into second normally but holding 2nd with no problem? What would be the problem. I use to be able to downshift to first at 20-30 mph for roll racing or hot rodding it and and hold it no problem. Now, it wont downshift to first gear or low when I want it. Started happening randomly.

@marcusambrester Год назад

They are made to shift into 2nd @ 4500rpm. It requires VB changes to stay in manual low above 4500rpm. @4500rpm, the reverse input drum is spinning @ 9000rpm, which gets sketchy.

@mrkeopele Год назад

my 2001 Suburban 4x4 just today started not wanting to upshift, no SES, no codes that I can see. I've already had intermittent service 4WD, and was going to get to that, unfortunately today when I went to go see neighbor it was in 4Low, and after the offroad portion ended of my run ended and I got to pavement I noticed high rpm's, drove to Post Office trying to Isolate symptoms other than the transfer case not shifting, it was DRAMATICALLY HANGING IN GEAR BETWEEN SHIFTS, and would only upshift after coasting, but mostly hanging in 1st too long and 2nd too long, not sure if it was getting into 3rd and4th at all, kind of hard when in 4Lo. Any clues as to where I should start?

@eldianmolina4920 Год назад

Great video my 2008 tahoe does hard shift from 1-2 gear does any one know if it this part here ?

@JeremysCarRepair Год назад

Why would my 4l60e have NO 2nd gear only sometimes. In the morning seems to rev up in first gear all the way to 3500, then shift straight to third…

@BuddysDIY 2 года назад

Just changed my 1-2 accumulator with a brand new one and it literally did nothing. Any advice. Symptoms- Hard shift 1-2 and 2-3

@ScottiesHobbies 2 года назад

What year? Have you checked tps?

@harryfeld1786 2 года назад

Do a complete drain and fill 6 times. 18 quarts. Yes, 18 quarts. Max Life valvoline full synthetic. $18 a gallon at Walmart. That’ll give you at least 75-80% new oil. I bought a small oil pump to suck it out thru the dipstick tube which makes this job very easy. $20 thru eBay. Drive it 10-15” between each drain n fill to mix it real good. Then 2 bottles of Lube Guard red. Worked for my 2001 4L60E. No more hard shifts.

@sebawagosh2356 2 года назад

This video is for the hard shift from 1 -2 and from Park to Drive. Thats Accumulator issue. But. If you have prob w both the 1 -2 and the 3-4 then its NOT the accumulator (or just the accum) But. That's also indicative of prob with both of your Solenoids. Change them out for the two of them. Do this before buying 18 quarts of fluid to flush it. Geeesh.

@velezdragon3574 5 месяцев назад

Can I drive around like this for a few months till I have the money to fix it ? It’ll be on my 94 roadmaster 5.7 lt1 with 54,000 original miles it’s been having a hard time with 1-2 shifts

@ericsiwy7809 3 года назад

Are 4L60 and 4L80 servos the same?

@scottmarvin5381 3 года назад

Hello I have a 98 s10 4.3 2wd if I’m driving normal my truck shifts great. If I get on it more than half throttle it acts like my fuel is being cut off and it slams into 2nd gear and tires squeal If I go up hill and I happen to hit passing gear it does the same thing. All other gears work fine. Any help anyone could give I would appreciate it Thanks

@javiersolis1456 4 месяца назад

My 1994, 1500 pick up 5.7 when it gets hot .. it gets stuck on 2-3 gear . It goes limp mode

@tpittowski4895 2 года назад

Thanks for the video. I have an 08 Silverado that the first time it’ shift from 1-2 its normal then every other time it’s a hard shift, if you cut the truck off and start it back up same thing first time is normal and then hard from 1-2 and fine through the rest of the gears. Wld this be a good place to start or is there any other direction you can lead me towards. Thank you.

@jesseaguilar8758 6 месяцев назад

I have the exact same thing did you figure out the fix?

@clintonadrian4958 4 года назад

I have a 4l60e that has recently developed hard shifting from 1-2 and 2-3 also but only after I drive a few miles or after its warmed up a bit. I was going to replace the 1-2 accumulator but im thinking that might not be the issue given the 2-3 hard shift. Any ideas?

@christopherhendricks4369 3 года назад

Line pressure too low possibly

@Chriselchingon23 2 года назад

Did you ever get it fixed?

@omaralhammadi677 5 лет назад

Scotties, I have an 2013 Silverado z71 when i drive with low rpm it shift the gear smoothly but when i drive faster with the high rpm it delay the shift between gear then the gear shift harshly so it is the problem from solenoids or what pls

@moneyisgood2011 4 года назад

Hey did you find the solution

@Bhdobbs 4 года назад

Did you find your problem

@lovepeace12568 4 года назад

Did you find solution?

@besitstookeezbeshzhacuz9371 3 года назад

Upgrade valve body

@longracing25 2 года назад

Do you have any vids on delayed engagement from takeoff with a 4L60E. I have a 01 Tahoe 4x4. I was hoping it was the converter clutch solenoid or something that saves the $2k shop. Of course filter didn't help, no metal either. I used one of the trans no slip super duper all fix additives,...nope..lol. It shifts fine at speed and doesn't slip thru gears or at speed.

@longracing25 2 года назад

sorry, i did look thru your vids, just didnt see one about delayed engagement.

@cace1968 4 года назад

Thanks good vídeo. Is the 1-2 accumulator replaced without remove the transmission un the truck?

@ScottiesHobbies 4 года назад

You do not need to remove the trans to remove accumulator. Make sure to check your harness for continuity and your shift solenoids while you are in there.

@cace1968 4 года назад

Thanks again body.

@pmotorsports8276 4 года назад

Did you watch the video

@cace1968 4 года назад

@@pmotorsports8276 yes I do.

@cace1968 4 года назад

@@pmotorsports8276 yes I did.

@beastamory1354 4 года назад

Thank you for the video sir! I have same issue but im confused in ordering the part, i see your link is 24220142 which is part number, is this the whole assembly for accumulator piston 1-2? Or just cover i really dont want to go through spring and other.

@ScottiesHobbies 4 года назад

Well that Ebay link is a pretty poor link. When I get some time this evening I'll hop on the internet and edit this video description with some better links. It might be hard to find a loaded accumulator but I'm sure they are out there. I'll get some better links in a few hours and post them. I'll let you know when I do

@brysonfernandez8178 3 года назад

Does it need a gasket ?

@Bigjamez2011 4 года назад

My 04 Escalade kinda clunks or slams from park to reverse would this accumulator fix or that other sensor you pointed out ? Also 1 to 2 kinda lunges forward and it shifts but seems delayed ?

@ScottiesHobbies 4 года назад

The accumulators probably won't fix a reverse issue. Maybe the 1-2 shift but not reverse. Have you checked your tps? Use a volt meter to do a sweeping test and see if you have any glitches. A bad tps causes a lot of issues.

@dominicludlum4855 4 года назад

Check your u joints and rear end

@stevenfarraway 4 года назад

My 03 silverado is experiencing a bit of a hard shift from first to second gear but only on low rmps like 1500. If I stay in it and let it climb to 2000 or more rpm is shifts perfectly. Does this seem like it would my my accumulator? If so, how urgent is it to replace it? Will it chase damage to my transmission or is it more of an annoyance? Please help.

@stevenfarraway 4 года назад

Sorry my autocorrect messed up my paragraph and I typed too quicky lol

@franhern4995 4 года назад

on a 2001 chevrolet suburban no reverse or drive only when i turn it off n turn it on works sometimes what can it be? thanks!!!!

@pmotorsports8276 4 года назад

Worn Transmission, clutches. Works when fluid is cool and thick

@codykeuffer 5 лет назад

Can someone help? I bought a metal 1-2 accumulator and it doesn't spin like the old one. Is that good or bad?

@ScottiesHobbies 5 лет назад

It shouldn't spin. If you have enough play in it for it to spin it was probably letting fluid leak by and that is probably why you are replacing it. On your new pinless accumulator I believe it has two seals. Am I correct? I believe one is a rubber base seal and one is a nylon seal. Make sure those are on in the right place. The accumulator shouldn't spin it should only go up and down. It's a piston.

@allthethings6419 4 года назад

I have a harsh shift from 1-2 on my 07 Tahoe but it only happens immediately after I receive an error message for stabilitrak, then stabilitrak light turns off again and it shifts just fine, and it is intermittent when driving throughout the day, but like I said only happens when the stabilitrak light comes on then immediately it will start shifting hard, then goes back to normal when the error randomly goes away again. Any advice?

@feezy3763 15 дней назад

I am having that same issue did you find out what the problem was.

@jorgevillarreal3638 7 месяцев назад

Hi...I have a 97 silverado and when I drive nonstop for about 20 miles and then stop and go again the second gear makes a hard shift..the weird thing is if I turn off the truck and start it again it goes back to normal?will this part make it do that?

@user-ml6ey9bo3p 5 месяцев назад

My truck just started doing it. Even if I’m just rolling down a hill from first it’s bangs into second.

@coldcheese5755 5 лет назад

Thanks for the videos I had a hard shift from 1-2 and took it all apart to swap out the piston and to check it all and to change the 1-2 3-4 servos while I was there but after taking the accumulator apart I found the piston jammed once I got it out the spring in the middle was broken hint may have found my problems but the question I have is most videos/pictures I see only show two springs and mine had three a red outer a white middle and a small red which is the one broken is this right if not can you point me in the right direction to this. Thanks

@ScottiesHobbies 5 лет назад

Those accumulators very. I don't think I've ever taken two of those apart in a row and seen the same set up twice. I honestly don't know why. In your case I would recommend probably doing a shift kit. Just so you know all the Springs match each other. It's going to be hard to say where that spring came from. Do you know if you had a shift kit already installed? Also I would replace the Pistons with metal ones if they haven't been replaced already. When I rebuild my personal transmission I went to the Sonnex pinless accumulators.

@nickkane8690 8 месяцев назад

My gmc sierra doesnt want to shift into second until I release the gas pedal. Do you think this could be caused by the accumulator or is the hard shift the only reason for digging into that? I already tested both of my shift solenoids and they are good.

@jeffboulicault4117 3 месяца назад

Mine has the same thing. What did you end up finding out?

@alexandercuello3168 3 года назад

Thanks for sharing! My friend 2004 GMC envoy does a weird clunk knocking sound but only when changing from 1st into 2nd gear. Does anyone has any ideas or experienced anything similar? Could this 1-2 accumulator be the reason? Thanks!

@randallstewart8487 3 года назад

Possibly 1-2 accumulator,check throttle position sensor on throttle body also,they can effect shifting too,that would be the easiest one to get to first!

@alexpichardo1065 3 года назад

@@randallstewart8487 Thanks for the help! I’ll try that first before spending $$$$.

@lilrichiedap9815 2 года назад

Try tps (throttle position sensor) that might be the problem

@user-rz6rj2iq8s 5 лет назад

Mine downshifts very hard 2-1, and it hard shifts almost no matter what 1-2. Sometimes it will be softer than other times. And when taking off it feels like my transmission is jumping.

@J69773 4 года назад

00Z71 did you ever find out what it was my truck does the same thing

@themanthelegend7048 5 лет назад

In second gear, when I let off the gas and let back on, it feels like theres nothing and then hits in gear.

@ScottiesHobbies 5 лет назад

Check the accumulator and shift valves. I bet you will find your problem. If the shift valves have debris on them, clean them and get ready for a rebuild. Is the accumulator stock? Check it either way but the factory ones are plastic usually and fail a lot. If their is debris in the accumulator that is not the accumulator, get ready for a rebuild. Check the piston and check the guide pin in the accumulator.

@themanthelegend7048 5 лет назад

@@ScottiesHobbies I believe it's all stock. It's in an h3. I plan on pulling my pan and checking after the winter. Maybe a rebuild is needed then.

@anthonybell7537 4 года назад

I have a 2007 chevy silverado would this be my problem im shifting very hard going into second and only second drives smooth i bought the gm manufactured one waiting for it to come is it one whole assembly or do i have to buy different parts to go in the accumilator

@ScottiesHobbies 4 года назад

Kits vary. I would google the part number so you know what you got. If you are replacing the piston, make sure it's not plastic. Update to a metal piston if you have not done so. Don't do the job twice... This could be your issue but so many things can be the root cause. Check for debris in the pan too.

@anthonybell7537 4 года назад

@@ScottiesHobbies im also throwing a tps code p0121 and a p0700 tcs ( mil request)and a p0742 tcc solenoid circuit stuck on and p2764 and p2770 i think maybe the tps is making all this happen im not sure i first thougt accunilator now i dont know

@irvingolivissr.3172 5 лет назад

Scotties hobbies what store did you stay not to buy the transmission on ebay where are they located so i can make sure I don't use them.

@ScottiesHobbies 5 лет назад

On ebay his name is 700R4Builder, I forget the shop name but I'll find it soon.

@irvingolivissr.3172 5 лет назад

ok I'll search it @@ScottiesHobbies

@jjjjjjjjjjjhjjjjjhjj 4 года назад

If the hard shift only occurs when cold could it still be this?

@ricardocorsa9077 3 года назад

Mine does the same thing when is cold when it gets hotter doesn't do it much. I hope you get an answer , but I guess the best way to know is replacing the part.

@bryancampbell431 Год назад

What do you think about the corvette servo installs on 4l60e

@ScottiesHobbies Год назад

If its a good trany. There is a 3-4 check ball in there that a lot of people don't think about. You can get a little better shifting from it. But... if the tranny is old and its bad, stick with factory.

@mikef.5932 Год назад

So I watched your video on the Sonnax painless mod. I ordered the kit along with a used accumulator from ebay. Before opening my transmission (2007 Silverado 4.8) I broke the housing on the used accumulator making the cross hatch. So I opened mine and noticed the housings were a little different. Mine had 1 spring, the used one had 2 but had a metal piston. I did the painless mod on my accumulator and since your video shows 2 springs I used the 2 from the one I broke. So I still have the same issue. I tested the ball bearing and it didn't come out and I figure if it did I would know it. What do you think?

@mikef.5932 Год назад

Forgot to mention..my issue is hard shift P-D and 1-2

@pacflor462 2 года назад

Nice 👍🏼

@ScottiesHobbies 2 года назад

Thanks!! Good luck on your diy projects. 👍🤞💪

@jacktrippa843 Год назад

I have question...I had someone diagnose my transmission because it was hitting the rev limiter going into 2nd and just going into 2nd all other shifts are good he had to use his laptop to switch the solenoid on/off then it would shift proper into 2nd. What could that sign be???

@ScottiesHobbies Год назад

Accumulator not moving properly would be my best guess. But a blockage in the valve body can cause this too.

@jacktrippa843 Год назад

Would that be the 1/2 accumulator valve train

@outcastartickat 5 лет назад

I have a 1994 4l60e wont shift at low rpm shifts from 1-2 when I get over 25mph at a higher rpm and wont shift from 2-3 till I get over 45mph at a high rpm and has hard shift from park to drive. Any idea what needs replaced.

@RyanFixesCars 5 лет назад

I have an 04 silverdo with a noticeably hard 1-2 shift under light/normal throttle. If i give it more throttle, it shifts smooth. Im a Chrysler tech and new to these GM transmissions. Would my issue fit this repair? And once i get the accumulator out, how can i confirm it is in fact bad

@ryangraff8872 5 лет назад

Hey did you ever find out what your problem was? I'm having the same issue in my truck.

@chrisg1364 3 года назад

Im having same issue as well? Did it work?

@chrisg1364 3 года назад

@@ryangraff8872 did you figure it out?

@ryangraff8872 3 года назад

@@chrisg1364 It was from the corvette servo I put in my truck, I just think the part was no good and something was wrong with it (crazy hard shifts instead of nice firm ones). I put back in my stock servo and it shifts normal again. So I think that was the problem. Did you figure out yours?

@juliotorres512 4 года назад

I did have A 96 chevy with A 4l60 that had A p0748 code pressure solinoid. But it was the PCM that caused the hard shift from 1to2nd gear

@ScottiesHobbies 4 года назад

So your fix was replacing your computer?

@juliotorres512 4 года назад

Yes the computer was sending 1.2 amps to the pressure control solinoid and the new PCM was sending .4amp and the pcs duty cycle was at 55% and that resolved the transmission code and the hard shift issue.

@ScottiesHobbies 4 года назад

That's great. Thanks for sharing your experience. Good job getting that thing going.

@nathandube1685 3 года назад

@@juliotorres512 How did you manage to diagnose this?

@juanrramirez4742 5 лет назад

Everytime when i turn 2007 hummer h3 on and switch gears from park 2 reverse and back to drive..in between i am feeling like someone rear ended me it is a harsh shift and when i takeoff from a red light or complete stop i feel a shifting pulling on me i keep thinking it is slip yoke idk i got motor mounts replaced pressure control solenoid replaced internal wire harness replaced still same ol issue any help hummer brothers and sisters???

@justinsmith9083 4 года назад

After i get going roughly 75 or 80mph when i come back down to slow speeds i get a hard shift from 1-2 i already put a new accumulator in it any suggestions

@Javelin3o4 2 года назад

Can the 1-2 accumulator resolve a delayed 1-2 shift?

@ScottiesHobbies 2 года назад

Possible

@Bennyclaze 5 лет назад

I'm having the 1-2 hard shift. With fault code p0961. I've replaced the EPC, 1-2 and 3-4 shift solenoid. But, I still have that fault code and hard shifting. Would the accumulator cause that fault?

@gghzbk 4 года назад

I have the same error code

@justinmuscle 2 года назад

I have error code po894

@joffrejurado3030 11 месяцев назад

Would the accumulator cause a no 1st gear shift? Seems that my transmission is taking off from the second gear, never goes to 1st gear

@Wildkat-1 3 года назад

No part #'s ...?

@ricardocorsa9077 3 года назад

Hi I have the same problem in a 2008 silverado, one question how do I know what kind of transmicion do I have? I see the 4l60 and 4L60E. Thanks your videos are great and very informative.

@randallstewart8487 3 года назад

08 should have a 4L60E,definately not a 4L60!

@sivey1214 10 месяцев назад

My yukon won't shift into 2nd at all, would this be my problem?

@ScottiesHobbies 10 месяцев назад

Possible. Have you heard any loud bangs like you drove over a road plate? Or is reverse starting to slip? Could be a sun gear.

@zachdeberry8018 5 лет назад

I too have the 1-2 hard shift on my 2005 Avy it’s very sporadic though doesn’t do it all the time tranny shop couldn’t figure it out no codes. Could mine be a accumulator issue? Thanks

@ScottiesHobbies 5 лет назад

It is a possibility.

@ScottiesHobbies 5 лет назад

If you are going to check it, you might as well replace it with a new piston and o rings.

@zachdeberry8018 5 лет назад

It’s really got me stumped it will shift super smooth at times (most of the time) while other times has a hard 1-2 shift....then back to smooth shifting 🧐

@182QKFTW 5 лет назад

I fixed my cold , hard 1-2 shift by doing this on my '03 Sierra

@jeffearnheart8568 4 года назад

My 95 s10 wont shift till 3000 rpm and when i start in park it tries to takeoff

@RoloGaming5411 4 года назад

Manual or auto? either way most like its ur neutral safety switch it should not want to go from park

@Handy.BoBandy 2 года назад

My 07 Silverado 1500 has a hard shift from 1-2, I had the 1870 error code. I bought the 1-2 accumulator that you highlighted in this video but it also has a shift kit installed so now I'm not sure if I should take it apart based on you saying you should install a shift kit instead of this pos

@halleffect1 2 года назад

5:37 How?

@dkv674 5 лет назад

I have an 06 Silverado z71 with the hard shift from 1-2. The original accumulator that was in the transmission had one big Spring and one small spring, but the one I bought only had one small spring. I ended up re-using the two springs that were already in my transmission with the new accumulator housing and I still get the hard shift. Should I have used only the small spring that came with the new accumulator?

@ScottiesHobbies 5 лет назад

Use what came with the replacement . Make sure the pin is in olace and not wobbly if you are reusing stock. The new accumulator mught not be the same exact diminsions as the factory. Some pistons are thicker so less spring or resistance is needed. Some springs are rated at different weights too so the small spring might be more or less resistant than the old one.

@dkv674 5 лет назад

Scotties Hobbies thanks, I’m going to swap it with the spring it came with and see what happens.

@ScottiesHobbies 5 лет назад

Good luck. Keep us posted.

@seanbrennan3824 5 лет назад

I'm having a hard shift only after truck warms up. And from 2nd to 1st it wants to buck forward while slowing down. Is this the same issue?

@ScottiesHobbies 5 лет назад

This could very well be a part of your problem. It's always worth checking you have a 1/2 or a 2/1 shift problem.

@marcusambrester Год назад

It looked like that accumulator piston did not even have a seal on it based on how easily it fell out of its bore. That was a reason for your harsh shift, the accumulator piston could not even do its job.

@ScottiesHobbies Год назад

This trans lost 3rd and 4th. 1st and 2nd got us home. The check ball in the case was leaking like a siv.

@shannonroseland6614 4 года назад

I have this hard shift issue with my 2019 Silverado 1500 LTZ...everything I've read or seen states there's no remedy. Nothing but endless trips to the repair shop. I am getting rid of my truck. Love the looks inside and out, but I've got better things to do with 50k

@kelvinventura71 4 года назад

Exelent video. I have a 2010 Chevy Silverado 1500 hard shift 1 to 2 p2769 code how to fix it

@JDalton 5 лет назад

What if it doesn’t want to shift from 1st into 2nd? If I let off the gas it shift ok.

@ScottiesHobbies 5 лет назад

Could be a few things. 1: Bad throttle position sensor. 2: bad 1-2 accumulator. Or 3: poor line pressure. Have you looked at your fluid? Is it discolored or burnt? Is the fluid at the fill line? Poor line pressure usually has more symptoms.

@JDalton 5 лет назад

Scotties Hobbies fluid is good. Just pumped out 3 quarts and put fresh. Making sure was the right amount

@ScottiesHobbies 5 лет назад

Have you ever looked at your 1-2 accumulator?

@JDalton 5 лет назад

Scotties Hobbies not yet, just started acting up a few days ago

@ScottiesHobbies 5 лет назад

@@JDalton everything is still stock/factory? How many miles?

@baird5776mullet 5 лет назад

Can you put this same part in siverado 1500?

@ScottiesHobbies 5 лет назад

As long as you have a 4L60e, yes.

@baird5776mullet 5 лет назад

@@ScottiesHobbies How can i tell and what happens if it's a 4l60 and i install the 4l60E?

@thegillz6743 5 лет назад

kenny baird should be the same. Only difference is the E transmission is controlled electronically

@baird5776mullet 5 лет назад

@@thegillz6743 So it should work since there are no wires running from it,thanks.

@robpaul7900 2 года назад

What year is this transmission you are working on? So I can do my 1-2 3-4 pistons without taking off valve body I don't really wanna take off my vb I have a 2001 4l60e.

@ScottiesHobbies 2 года назад

To get to the 3-4 in the case, the valve body has to come off. This trans was out of a 01 tahoe.

@robpaul7900 2 года назад

@@ScottiesHobbies ok no way around it can't pull it down?

@ScottiesHobbies 2 года назад

@@robpaul7900 nope. The plate between the 1-2 & 3-4 is hald in by the valve body.

@robpaul7900 2 года назад

@@ScottiesHobbies would it be a bad idea to replace just the 1-2 without doing the 3-4?

@ScottiesHobbies 2 года назад

@@robpaul7900 better than doing nothing. If you don't have 3 rd or 4th, the check ball in the case might be bad.

@christopherhendricks4369 4 месяца назад

if that transmission was built by monster i would start shopping for a new one now

@ScottiesHobbies 4 месяца назад

Man... this trans lasted 900 miles... junk!

@christopherhendricks4369 4 месяца назад

@@ScottiesHobbies crazy how they sell it as built lol when GM had better ones from the factory than this. 4l60 isn't bad, just can't hold up to abuse or poor maintenance. I've run one for 220k and it was still going.

@banno6938 5 лет назад

Why would you buy a trans from E-bay since you can "allegedly" build one ?

@ScottiesHobbies 5 лет назад

Sometimes it sounds better to spend the money to save time... but time and time again I learn that if you want something done right you gotta do it your self.

@banno6938 5 лет назад

@@ScottiesHobbies Did a 4l60e that was a Good-wrench rebuild & the reverse drum was concave when installed. 75% of the band center was completely untouched . Installed a customers " B&M 400 " that had no reverse & it filled his new Hi Stall converter with metal . They wanted it shipped back at cust expense to "allegedly" fix it . I built his original & drilled & flushed his converter & sent him down the road So NO , I don't trust anyone !

@pmotorsports8276 4 года назад

Also sometimes customers request vendors or parts and only ask us to supply labor