⫷ GM 4L60-E Shift Solenoid 1-2 3-4 A and B replace p0756 p0753 p0752 ⫸

Подписаться 47 тыс.

Просмотров 701 тыс.

50% 1

Cover a few questions about the shift solenoids. How to test Wiring harness and test the solenoids. Removing and replacing the shift solenoids for A & B in this 4l60e transmission
Make sure to look at my other videos for more 4l60e fun. YT search 'Scotties Hobbies 4l60e'
Want to send us stuff to try:
Scotties Hobbies
2455 N Naglee Rd #143
Tracy, CA. 95304
Donate:
Paypal.me/ScottiesHusstle
$ScottiesHobbies
listen on spotify: spoti.fi/3nQbXbk
Check out Website: www.ScottiesHobbies.com
Facebook.com/TheRealScottiesHobbies
Buy Shift solenoids:
Ebay: ebay.to/2MlJmaU
Amazon: amzn.to/2Mi7MSP
. This video covers a few questions about the shift solenoids. How to test the Wiring harness and test the solenoids. Also removing and replacing the shift solenoids for A & B in this 4l60e transmission that was removed from a 2001 Chevy Tahoe. Procedure is the same as not very similar to many models mainly from the 1996 to the 2002 era. Check out Scottieshobbies.com for a more detailed description of disrepair that includes the bolt sizes for the pan and the true torque specifications for all parts shown.
outro credit:
EPICmoh Gaming
goo.gl/7wpdTg
Song: Kovan & Electro Light - Skyline [NCS Release]
Music provided by NoCopyrightSounds.
Download/Stream: ncs.io/SkylineYO
part numbers: 24230298, 10478131, 24236521 This site contains affiliate links for which I may be compensated.

Опубликовано:

2 авг 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 673

@beachwalker2574 Год назад

Update ! 2003 Chevy Tahoe 4.8L 4wd 331K miles. Here what has happen, I went to drain the tranny fluid and the drain plug bolt head stripped so I drilled a small hole in the pan and drained the fluid, I purchased a used refurb pan then took down the pan I changed the both solenoids A-B 2-3 3-2 then buttoned the pan up fill with fluid and it works ! Shifts nicely and its fast ! Thank you !

@johnhutchinson5398 4 года назад

And thanks for the helpful tips for us guys whose disabled and on a fixed income.

@johnbowers4687 9 месяцев назад

Thank you Scott for the way you explain this it helps a lot 9 _6-2023

@lemmy5850 Год назад

Allein durch das video kann ich 3 fehlermeldungen beheben. hatte die teile gekauft wusste aber nicht wo die hin gehören. Danke für das video

@quadsportsuzuki 3 года назад

Thanks for the video bro!!

@kengrimes4586 5 лет назад

Scotty you are by far the best at explanation of what to actually freakin do man.you make the other dudes like they are sitting still son now if i can do it on my back all good thanks for your time and knowledge sir.

@ScottiesHobbies 5 лет назад

Thanks for the kind words and view. Glad to help.

@briandalton6077 Год назад

@@ScottiesHobbieshi there I have a question my 1991 Chevy S10 pickup 4*3 it's automatic when get in to drive it then it takes a minute for it shift so would that be shift solenoid a or b

@bobbyg2241 5 лет назад

Thanks for this informative video budd. Ive never done any transmission work in my life but after watching this video and great angle by the way... My 97 chevy is driving like a badd mamma jamma and the gears are shifting smoothly. If i didn't pound some beers while i was doing this... I'd take the fam out for a test drive but i guess tomorrow's drive will be thanks to you budd keep them videos coming..👍

@bradypetersen9339 4 года назад

I also have a 97 k1500.. what did you all do to fix your shifting issues? Mine shifts hard and does not shift into 4th gear anymore. I haven't done anything for transmission work either other than a filter replacement, trying to do all my research before I drop the pan again.

@DJ-tm2ed 7 месяцев назад

😂😂😂

@arak17iv77 13 дней назад

Thank you great vid no ads awesome stuff

@happydays454 5 лет назад

Good work dude

@GerardoPerez-rl9il 3 года назад

Thank you so much for the video

@zauchy8 3 года назад

Very good video. I learnt a lot. Thank you

@ScottiesHobbies 3 года назад

Glad to help. Good luck.

@amandawoodley3749 5 лет назад

You need to keep up the good work I learned a lot about the solenoid keep these transmission videos coming I will watch them all 👍👍👍

@ScottiesHobbies 5 лет назад

Thanks! I plan it. I have a couple more fyi vids like this one coming up soon. I also have another 4l60e laying around that I might rebuild with every upgrade i can find that will work with one another.

@peacepoet1947 Год назад

@@ScottiesHobbies I have a used 94 Sierra C3500 U-Haul truck and recently got a code 39 which is the Torque Convertor Clutch sensor. Which sensor is TCC sensor?

@peacepoet1947 Год назад

@@ScottiesHobbies and where is it located?

@malikallen1222 5 месяцев назад

Is this a do it yourself job? Do you need a computer or anything to reset anything?

@johnealy6916 5 лет назад

awesome video

@josephlomonaco8085 3 года назад

Great job on presentation

@1pcmedic 4 года назад

I have a 2001 tahoe with a remanu trans installed about 5 years ago. Now when i accelerate from a stop, I get a slight slip going from 2nd to 3rd at about 28mph. If I accelerate slowly you almost don't feel it. Other than that it works perfectly. I baby it for the 2-3shift so can hopefully get many more miles out of it. I watch the tach and I can see it go up like 300-400 rpm then drop when 3rd kicks in. Do you think its a solenoid problem or something else?

@lanceboone6488 2 года назад

Awesome video really helped me out

@ScottiesHobbies 2 года назад

Glad to hear. 👍 Good luck on your fix!! 🤞💪

@brookem.1015 8 месяцев назад

Great video thanks.

@mr.5.04 3 года назад

I need your opinion on this one because I’m not sure so whenever I got the car I was told the trans was “rebuilt” it goes all the way to 3rd gear an will not go to 4th I manually put it in 2nd an it’s fine does feel sluggish going threw gears but it will not go into 4th well at least this is what I’m thinking because the car starts raving alittle to high I think it’s perfect till I get at about 60 or 65 an then you start to realize it’s not shifting oh an also if you kick it down it doesn’t down shift from what I can remember I’m gonna go for another drive an test it again do you think this could potentially be my problem because the trans doesn’t feel bad whenever I manually put it in second it pulls great even 3rd pulls great just no 4th

@jimbobrennan8011 Год назад

Just subscribed, thank you for the info. Doing my first replacement, 1993 Firebird Formula 4l60 lt1

@ScottiesHobbies Год назад

Good luck! These 4l60s can be a little tricky. 🤞💪👍

@caddystrophic4778 3 года назад

Thanks for the video. My hummer h3 started shifting oddly today, so ill be doing this job on Friday. Subscribed.

@l963nnn2 4 года назад

Now I can ask about the parts like Im a transmission wiz at the auto parts store. Thanks. 😎👍

@dallynsr Год назад

rofl! That’s one of the best comments.

@teodorotorres1092 Год назад

@@dallynsr do both solinods have spring in them

@tiekilew 4 года назад

Hey Scott, hope all is well for you and thank you in advance. I have just purchased a 2002 GMC ENVOY SLE, i was told the transmission was out . It had been sitting , at this point approximately 4-5 weeks. I arrived and started the engine and just for kicks pulled it in reverse and it took! I then pulled it 8n drive and it took. So i pulled it back into reverse and backed , up hill, out if the drive and proceeded ti go forward about 25 yrds , when i went to back up to turn around it would not take gear acted as if it was in neutral. So i psid the lady and loaded it on a roll back and brought it home to start researching . So the next day i went to fuse #47 in the rear block and sure enough the fuse was blown !!! - BUT-. i boosted it back off again ( battery is shot) and took off to town to try it out ans get some fuel. I got on it pretty good when i left and laid pretty good rubber and thoyght i had stole this envoy for no other than a fuse!!! NOPE.... LOL! made it about a mile and it started to be sluggish trying to shift and then juzt as if it was in neutral again ...not pulling at all. ANY SUGGESTIONS WOULD BE GREATLY APPRECIATED.

@carlosvarela396 3 дня назад

Thanks for the information

@Vet-zj5lq 3 года назад

Good video 👌🇺🇸

@kevinmetcalf6371 10 месяцев назад

Great video

@ScottiesHobbies 10 месяцев назад

Thanks. I hope it helped you. 💪👍🤞 good luck on your project.

@cruisingal2 3 месяца назад

I have a new problem. This video is excellent, hubby a mechanic, but really retired. My GMC Yukon XL Denali 2011 has had a slight problem for about 6 months, occasionally at a light, I press the accelerator and it jerks into gear as I take off. Then while driving home from a long trip a few days ago, at the start of the trip, driving 75-80 mph at times for the first hour. Stopped at rest stop, then when I got on the road the shifting wasn't working correctly. Sometimes when accelerating, the rpm's shot up but the car didn't seem to want to accelerate. We ended up driving home with the TOW button pushed and babied it going home. Hooked it up to a scan and it isn't giving any codes. We want to start with replacing both solenoids and checking the harness ends. But according to the friend mechanic that hooked it up, said it wasn't looking like it even has a solenoid in the transmission (like that particular transmission doesn't have one). He said all of this was confusing, not making any sense. So he will speak to some other guru's on it. Has anyone had something similar?

@saulvillarreal5940 4 года назад

Thanks man

@johnpowers8276 5 лет назад

Hey Scott,I have a 1995 Camaro v6 with the 4L60E all gears shift fine but when I take off from a stop it feel's like it is slipping and fluid level is fine,the main plug on the side of the trans.will not lock down in place,could that be the prob. and I did replace a line that was leaking and speed control censer. can it be bad solenoid/dirty?

@joeperry5242 4 года назад

i have a question i got a 2005 chevy silverado i was getting codes p0756 and p0758 i replaced both solenoids a and b and im still haveing the same problom if i put the shifter all the way down to first on the colum it takes off fine any help would be greatley appreciated.

@joshdutcher2915 5 лет назад

2006 envoy feels like car goes into neutral when warmed up and loses gears, any ideas

@jaimegajg 2 года назад

I did replaced the solenoids on my 98 blazer and after i assembled all together i started on but did not engaged either forward or reverse. I problably need to go back and check the solenoid pistons and continuity on wires. Thank you so much for this video.

@AcerArtsOfficial Год назад

When changing out these shift solenoids and the tcc solenoids, do you have to get them programmed at all or are they just plug and play? As long as im buying the genuine parts. And also, when installing the new solenoids should i dip them in new atf fluid before putting them back into their slots to try to get fluid back into those crevasis, and to also kinda lube the screens and o rings associated?

@amberbreedlove2169 5 лет назад

Im So glad i came across ur video, Thanking God i did... I was just replacing my shift solenoids and well into the night when i finally made to them..lol had to remove my drop bar to even to the last three screws... anywho when i removed the first Solenoid it popped out And i didnt see anything else fall , well long story short i noticed the long grooved like pen u pulled out.. So now i know what to do with it.. thank u ..

@ScottiesHobbies 5 лет назад

Glad to help! Good job getting the job done!

@morgan-5171 Год назад

Hi Scott, thanks for sharing 👍 Hey just a quick question, my auto has lost reverse and neutral and only goes into drives. Do you think its a solenoid or something else?

@reekgoesoutside 5 лет назад

I have a 2003 Chevy trailblazer. This past Saturday morning I was driving and when at 45mph it was pulsing, later in the afternoon it was not going into 3rd until I let off the gas then slowly pressed on the gas pedal. Today, Monday morning it was fine until I got to operating temp then it would not catch 3rd at all. Does this sound like something a bad solenoid would do or a different issue?

@John_McDonnell_76 2 года назад

I started my envoy today and put it in reverse and it just revved. I was shocked. Yesterday had no issues whatsoever in reverse. I’m hoping it’s simply the shift solenoid that controls reverse

@savagesock3598 2 года назад

Haha 4l60e go **PNNNN**

@m0th.shroommm 2 месяца назад

I have this issue with reverse only. Did you replace the solenoid?

@juliodiaz8280 5 лет назад

Seeking your advice; 98 chevy c1500 4.3 4l60e. Sat for 5 years. Was a gift. Changed filter/fluid. Nothing major at the magnet. Just small dust. When cold trans shifts in all gears. Once slightly warmed, it shits the first hard(brutal). After that it doesn't shift. What's your opinion?

@jesuslara3175 2 месяца назад

Thanks for sharing

@010190ds 5 лет назад

I have a 98 4 wheel drive 1500 Suburban. It generally runs fine but will intermittently "clunk" or jump when going into 2nd gear. This will occur only after driving for some time but again, it's infrequent. Could this be caused by a faulty solenoid or maybe a bad harness? Thanks for your help.

@michaeltmeyer2966 4 года назад

Does the valve hole that has 2 valves in one have a spring in it too?

@drivewaygarage1561 3 года назад

Do you know if the 2003 GMC 1500 is the same? Thanks for the video.

@eduardohh6180 5 лет назад

Hi i have a question.. I had my chevy silverado 11 every time the motor get hot the transmission start slip what you guys think is the problem

@olisabosah4292 4 года назад

I have this same problem but different car (Toyota Camry) were u able to solve it

@vghostby3867 3 года назад

My 04 yukon denali will shift from first to second but wont shift from second to third etc... any ideas?

@troyparish7713 4 года назад

I was curious if the solenoids are the same ones in the Volvo transmission as well?

@chuckplainview4085 Год назад

Was roasting tires like a goofball doing some weight transfer in the rain in my 2013 silverado. Went home went to bed woke up and now my 1-2 shift revs really high and finally drops in after it hangs at 4.5k. If I let off the throttle at 2.5k where it used to shift it shifts into 2nd no problem at all. Checked fluid And level was really low so put a few quarts in and that helped a little so now under light throttle at a stop sign it will shift basically fine again but anytime I put a little bit more than a little throttle it pulls the rpms up real high and holds them until it hard shifts

@davecannon3327 4 года назад

I have a question, I have a 1993 Chevy Silverado K1500 4l60e and when I start driving it it shifts totally fine though as soon as it gets to operating temperature it will go into limp mode speedometers to 0 and the 2 gear and high rpm, also replaced the speed sensor already, and I just removed pan tonight and lots of fine metal in the bottom what could be the problem, please help

@esauargueta6435 4 года назад

My gear will change to 2 gear when I go more than 35 mph then drops back to first. Can you help? I changed the solenoid A but still same issue. Test both solenoid as well.

@losguerosibarra-oficial1240 5 лет назад

I have a question! I have 2002 Tahoe At sometimes I can get it to go reverse n it can almost go forward Could that be the solenoids or the transmission

@fullsendfishinghunting165 3 года назад

I have the exact same issue did you ever find out ?

@victorsolano6023 17 дней назад

Any update?

@syedmukarram8597 Год назад

Thankful

@Almeshtages3 6 лет назад

Thanks

@neeteshtmoneynarayan1742 5 лет назад

Hey so my car only goes in reverse and will not go forward in gears 1-D, could it be the solenoids? Please let me know, thank you and I appreciate your videos!

@thehammermanduke Месяц назад

Good stuff 🎉🎉🎉🎉🎉🎉

@braddougherty8733 3 года назад

is there a way to program solenoids? I bought some off rockauto and it says that programming is required?

@chrishitemup 2 года назад

i have a 2012 mazda 6 and there’s this AT light popping up next to the part symbol i replaced the tcm the transmission fluid and speed sensor but no luck could this be the issue ?

@adamrichardson2197 2 года назад

What would be my issue on my 07 suburban if it shifts into 2 gear fine but when it gets ready to shift into 3 it doesn't?it just free spins threw the rpms.doesnt try to shift into 3 at all.any info would be helpful right now

@waynenoel4670 3 года назад

Great man.Which are solenoids A and B that will fit Chevy trailblazer 2005?

@mauriciohernandezreyes2189 2 года назад

I have a question,I bought a pair of shift solenoidsand they are letter A but the original ones are letter B and my transmission is only working on 2,3 and reverse,does the letter have something to do whit it? thanks

@williamnicholsjr867 5 лет назад

Really great video this video really helped me out. Thank you

@johnegutierrez1423 3 года назад

I have a 97 Tahoe 4x4. Shifts fine from 1st to 2nd but rpms high and does not shift to 3rd. I didnt attempt to forcing it to shift. I havent hooked up a ODB scan tool as of yet. In need of some advice as where to start cause I'm stuck in Oklahoma.

@myretroworld1121 5 лет назад

Hi there,I have a 2004 Chevy Blazer 4x4,my service engine light is on but my trans has been giving me trouble like a sluggish or delay from park to drive it feels like it's a sec before it engages and I took it down the interstate and it did not want to shift into the last gear. I started back home and off the interstate it did fine,could this be the a&b solenoids going bad?

@tonymata2705 5 лет назад

Hello I have 2 question with 2 problems lol... First I have a 92 Chevy blazer full size 4x4 and from one day to another it didn't want to shift gears I would have to put it on 2 so it could drive normal!! Second one is a 95 Tahoe it was running good till my drive shaft broke off now it rides stupid ruff like if I have about a 1000 pounds behind me lol not sure of I didn't put the drive shaft right with the u joint that connect to the rear differential

@russingle1340 4 года назад

Hey Scotty,I have a 2003 trailblazer I've just put a shift select cable on.I thought I adjusted it right but the next day It shifted into overdrive and all the sudden it started freewheeling It wouldn't pull in any gear.It has close to 300000 on it.Any idea what it could be or where should I start troubleshooting?

@sabertachet 3 года назад

I have a 01 blazer with the 4L60E and it wont shift past 1st gear when cold, but when its been driven for awhile and warms up it operates fine and will reach highway speeds. Shift solenoid?

@Mario-zl4el 2 года назад

I had a very weak shift solenoid when applying the 9v so I replaced it the sluggish acceleration went away tons of power but 3rd gear completely slips lost not sure what’s next.

@lonniehamilton914 3 года назад

Can you check the wiring harness will a probe light my 2005 Corvette is shipping hard like bam? Help please.

@randytolin3059 2 года назад

My trail blazer 2005. When you put it in drive it. Moves but barley. Like something holding it back do you think its the shift solenoid

@elias1871 5 лет назад

I have code P0894b,shifting from 1st to 2nd gear is rough,i may have pinched the wire harness near the bell housing of the transmission,could it be a solenoid though?

@aavaz3043 4 года назад

Good morning I have a 2007 tahoe 4.8 and won’t shift. But I don’t have problems selecting the gears. Move forward and reverse with no problems. Transmission feel strong but won’t shift. Change the fluid filter and solenoids will fix my problem?

@rickhenderson5708 2 года назад

I got a S10 98 Chevy blazer it throwing 753 code shift 1/2 I changed them both it shifts great but it keep throwing the same code if went threw all wiring only thing I'm finding is tcc is only showing 10 om's it shows to be u on transmission plug just not sure witch one it is of the tcc solenoid it is but shouldn't it throw different code if it iv had pan off like 5 times now checking wires and solenoid's thank in advance all help would be appreciated

@francismwila639 Год назад

My car hard difficult shifting gears then eventually got stuck in first gear. DSI M78 6T. When I put in R it moves but when I put in D it takes long before taking off. I have code P0700. Do I change solenoids, valve body or TCM?

@davidvalleysr.8223 6 часов назад

Great video it really helped me replace my shift solenoids, but I didn't see a link for the power probe.

@CAR-AUDIO-PRO 4 года назад

What would cause both solenoids to have power at the same time? I took my blazer to a mechanic this week and the scanner shows both shift solenoids on.

@seepersadsingh4073 10 месяцев назад

Can be a failed ground wire

@johnsaesee9224 5 лет назад

05 Tahoe can I check those wires for the shift silnod with volt meter

@willa3060 5 лет назад

I'm getting code po7060 on my 03 range Rover. what do you recommend?

@jason6325 10 месяцев назад

This is the best video I've came across so far on this subject. My 03 just started acting up. It's stuck in second gear.i thought well it's gone. But when i hooked up my scan tool it said sylnoid b. So guess that's better than a busted tranny. I've never done this before but you explained it well enough I'm about to jump on it. I've swapped tranny's dozens of times but never a sylinoid. Hope that's all it is

@roamsolo 8 месяцев назад

Did it work? I just got a solenoid b stuck code also . Let me know plz

@jason6325 8 месяцев назад

@@roamsolo yes it worked pretty easy fix. You will have to loosen yourexzaust manifold bolts to get your pan off. You dont have to take them off. Just loosen so you can pull the exhaust down a few inches. Make sure you replace both A & B sencor. That way you make sure it's not going to fail. I got A.C delco off amazon for $35. And it fixed it. I changed the filter while i was in their as well. Shifts great now. Good luck.

@roamsolo 8 месяцев назад

@@jason6325 awesome thanks man

@AhmedHadiPADI_scuba_instructor 4 года назад

I swear you are a blessing!!!! I’ve learned a lot! Appreciate you very much man!

@kinggomez2728 4 года назад

Hey scottie bought both solenoids from your link replaced both deleted the code but still having the the same slugish 1st gear. Need your help!!

@tonyv33ee 8 месяцев назад

Before changing both solenoids i had and open circuit code. After changing I had a solenoid A code, what gives?

@tommywilhite1781 3 года назад

Hey Scottie, thanks for the videos, with my A and B solenoids one solenoid is loose with the clip installed, its the 2-3 solenoid. No second gear, I can skip second by letting up on the throttle it will then shift into 3rd and 4th normally. Any thoughts and the loose solenoid?

@bradcanning875 2 года назад

Did you ever figure out the problem? I am having the same on and a code that states "Shift Solenoid "A' stuck open"?

@tommywilhite1781 2 года назад

@@bradcanning875 the rod in the servo that works the 2nd gear band is too short, they sell longer rods as a fix for this.. That's what ended up being my problem

@bradcanning875 2 года назад

@@tommywilhite1781 Thanks. I bought a new shift solinoid because the scanner said shift solinoid A stuck open and I'll do what you did as well.

@tommywilhite1781 2 года назад

@@bradcanning875 do you still have 4th gear ? As long as it shift into 4th and doesn't slip, it should fix the problem

@bradcanning875 2 года назад

@@tommywilhite1781 Yes it shifts good into every other gear up and down and no slippage ever. So I should ignore the "Shift Solenoid A Stuck Open" code. P5402 I believe it is? I bought the new solenoid and I will purchase the corvette servo kit with the longer pin. I read on Blazerforum of a guy with our exact same problem and he changed the tranny at still had no 2nd gear. He gave the new tranny to a friend and it worked perfect in his s10. It was the wire harness for him.

@barrettsoutdoors6379 5 лет назад

Please help me my truck shifts fine in other gears but in 1st and second it dont shift i have to wait till it gets to 40 to shift

@ScottiesHobbies 5 лет назад

The one to accumulators are known to go bad. If I were you I would take the pan off check the accumulators and check the 1 2 and 2 3 shift solenoids. If all those are good then I would start looking into line pressure.

@weeverob Год назад

would this solenoid affect downshifting? My 2000 Ranger after sitting for 6 months of no use started not shifting to the passing gear. Regular up and downshifting is smooth but when i put the pedal to the metal the tranny will not shift to the passing gear. The trans fluid is clear and clean. I've never changed the filter. Is there an additive I could put in to help flush deposits prior to changing the filter and fluid? Tx much

@allenmathews1977 2 года назад

I haven't checked it yet but I was also told about the electric pressure switch

@jakeo6475 7 месяцев назад

Can anyone help change solenoid a and b and transmission seem to shift like its suppost to but it also seem to Rev around third and fourth gear but easy off throttle then back on it feel like it shifts I bought the transmission off Facebook market place and told it was rebuilt

@honestpainter 4 года назад

The great white hope!! 👍🏽😘

@mr.forbes4012 4 года назад

I have a 2012 vw jetta and i have code p30735 and p0734 do you think if i change all the solenoid it will resolve the issue??

@ORIGIN-qy1ve 3 года назад

LEARNED A TON ON HERE !!! Keep BRINGING PLEASE

@user-fj2pm5vx3o Год назад

Hey Scott, I have an issue with my truck is a Cadillac Escalade with a 6.0 n is not shifting I have change a that supposedly is the one with the screen if am not mistaken I need your help thanks

@shanenichols2393 4 года назад

I have a 4l60e 300mm I have 1st and reverse what do you think the problem would be

@vader1943 3 года назад

How do we clean the insides where the valves go? What tools?

@haroldadams8545 3 года назад

Well I have a 700r transmission in overdrive keep jumping out but after I dropped the pan the filter was setting at the bottom it was out of it place so im hoping that's why the overdrive was jumping out of overdrive can that be possible

@murdaruss 5 лет назад

A is it gonna be similar in a 94 Silverado 2500 And B are they the same sensor same part number just buy 2? Or are there diff part numbers etc.

@produceconstruction9228 4 года назад

good job

@ScottiesHobbies 4 года назад

Thank you for the kind words and you. Good luck on your DIY fix.

@BigAiden16 4 года назад

Great video! Very understanding

@08zackmccoy 3 года назад

I have 2003 yukon xl and my vehicle acts as though it forgets it is gear,i can stop and put the vehicle back in park turn car off then start again and it will go but shortly after it does it again then i can restart and put in gear any clue

@MarcoRodriguez-lr2xt 3 года назад

1994 c1500 with 4L60e. Upshifts fine but doesn't down shift. I can down shift manually. No slipping in any gear. OBD1 system on truck and no check engine light on.

@joeknull6685 2 года назад

you mentioned using power probe to check for ground in solenoid wire harness (said should have ground on both sides or plug) which it would have been great seeing you actually have the probe activated on a battery to see you do it... I get ground only one one side of each solenoid harness, so was it true the probe should light up or beep on both sides? and or should the car key be turned? or everything off to do test?

@wailelemcmillan8187 5 лет назад

Aloha was wondering i have a 99 Silverado 1500 4.3 2 wheel 4l60e the problem I'm having is from 2nd tip 3rd kicks into neutral right about almost 30mph i let off the gas it'll kick back in eventually if i floor it higher it'll kick into third was wondering you had any diagnoses for that

@garylacorde8971 3 года назад

That's the same problem I am having also ..can u let me know what u did to fix it

@hectlop100 5 лет назад

Thank you very much for your help will try to do what you advise to repair my transmission with code p0751 shift selenoid performance or stuck off

@willa3060 5 лет назад

Hector Lopez did you have fix your problem? I'm having code p0760 on mine and I'm at a lost

@anthonyi1848 4 года назад

Also curious if either of you found a fix?

@edwardhernandez4358 4 года назад

Hello I have a question does a 99 chevy tahoe transmission fit a 98 1500 chevy

@timhomesolutions 5 лет назад

hey can you tell me where the transmission temp sensor is located

@MrDbro94 5 лет назад

My brothers truck shifts into second find but it wont go into third and sounds like it goes into neutral. Could this be the problem? Dont want him to have to pay for a rebuild.