01-05 Honda Civic 1.7L Valve Cover Gasket Replacement FAST! Overview

Подписаться 577 тыс.

Просмотров 72 тыс.

50% 1

Fast paced overview along with pro tips on how to replace the valve cover gasket set on 2001 - 2005 Honda Civic with 1.7L engine.
On Amazon:
*VALVE COVER GASKET SET: amzn.to/3tLlcgr
*SEAL PULLER: amzn.to/2MRKVmv
*CAMSHAFT PLUG: amzn.to/3tCvWgS
*SUPERCLEAN: amzn.to/3a3PYcp
*SCRUB BRUSH: amzn.to/3qawtV5
*MILWAUKE M12 RATCHET: amzn.to/3aWjyA2 `
~~~~~Help Support the Channel Below~~~~~
~Subscribe Here: ru-vid.com...
~Follow on Instagram: / nononsenseknowhow
~Donate via Paypal: www.paypal.com/cgi-bin/webscr...
~Shop on Amazon from this Link: amzn.to/2uDE6eT
~My Gear/Tools on Amazon: amzn.to/36S6J6s
*I get a small commission on any purchases made through the Amazon affiliate links on this page. Doesn't cost you any extra and helps me to continue producing content. Thanks!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Other AWESOME Channels You Should Check Out:
~South Main Auto Repair LLC: / @southmainauto
~BleepinJeep: / bleepinjeep
~Project Farm: / @projectfarm
~Chris Fix: / @chrisfix
~Andrew Camarata: / @andrewcamarata
~Humble Mechanic: / humblemechanic
~Essential Craftsman: / @essentialcraftsman
~EricTheCarGuy: / ericthecarguy

Авто/Мото

Опубликовано:

9 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 65

@Fix_It_Again_Tony 15 дней назад

Perfect. I was wondering about the dabs of silicone in the corners there when I was looking at the gasket and you confirmed my suspicion. Thanks for not making this video any longer than it needs to be.

@groverscorner2364 Год назад

Great video, I especially appreciated that you don't film parts that don't need to be filmed. You explain and move on, very good, thanks!

@pjwhalen5104 6 месяцев назад

This is a perfect video for my current level! Tons of helpful information, concise, great video (nothing hidden in the dark or out of focus)! Thank you Thank you Thank you!

@2792revs Год назад

Subbed! Straight forward and you lived up to your name with no nonsense! I have an 04 LX which just started to leak (cam seal cap) and I found your video. Great info!

@Kpizzle85 Год назад

Awesome video. Great tips on gasket and washer attention, and torque values. I hate having to look up torque values after someone “explains” how to do a job. Subscription earned !

@strawberrysoda0 Год назад

this is the best walkthrough video i’ve ever watched. extremely helpful and straight to the point. thank you very much!

@blautens 2 года назад

Everyone should own a Civic (although preferably a 6th gen, or earlier, in my opinion) to learn how to wrench - it's relatively a joy to work on compared to other cars and frankly, you won't be doing a ton of it if you just do a few basic maintenance type things correctly.

@2792revs Год назад

I read your comment and agree although I actually learned on mk1 and 2 VW scirocco,corrado and GTI. Very similar in being tech friendly cars that are fun to learn on. I've got an 04 Civic LX daily driver and I'll never get rid of it. Swapped engine and transmission and re painted. No AC but who cares?! 30+ mpg!

@leecountycopwatch81 8 месяцев назад

What about 7th gen?💔

@rmlora6tt133 4 месяца назад

100 % with you!

@danthemanr2679 10 месяцев назад

Hey bro thank you for making such an easy and thorough video ~excellent direction and explanation on how to do. Keep up the good work bro! 👊🏼👌Thank you 👍

@p.nunyabi378 4 месяца назад

I Personally am gonna say thank you for the FULL AND COMPLETE video.....DO MORE PLEASE AND THANKYOU ....from me andall 7TH GEN HONDA drivers

@djlancer88 7 месяцев назад

Hey man, been watching your videos a little while now and just recently bought an 05 civic to get me through winter. Love the fact you have some videos on it along with Jens car. Good stuff. I'll probably do this job if it makes it through winter with no big issues. Bookmarked for sure. One of the first things I did was hose everything down with PB blaster thanks to your videos =D. Im going to need to bring it in for all new brakes lines soon here, I would attempt it if the proportioner valve was in a easier spot to get too. (not many youtube videos on it and theres probably reason for that. Its also going to need everything else lol XD. I'm going to buy a hat!!

@BeerkegGarage 3 года назад

Thx for the upload 👍

@nathanlang1769 Месяц назад

Perfect video thanks 👍

@williegreen7148 4 месяца назад

Thank you ! Great job.

@BustedKneeAdventures 2 года назад

Very good video. I did this today. Was a fairly easy job. I snapped 3 of the coil pack connectors and over torqued one bolt hole on the valve cover for coil wires. No leaks and runs so it's a win!

@NoNonsenseKnowHow 3 года назад

On Amazon: *VALVE COVER GASKET SET: amzn.to/3tLlcgr *SEAL PULLER: amzn.to/2MRKVmv *CAMSHAFT PLUG: amzn.to/3tCvWgS *SUPERCLEAN: amzn.to/3a3PYcp *SCRUB BRUSH: amzn.to/3qawtV5 *MILWAUKE M12 RATCHET: amzn.to/3aWjyA2

@CarlosRodriguez-hb3vq 3 года назад

Great video! I’ve done four of these on CR-Vs. My advice is be patient (I once spent 1/2 trying to pry the cover off but I had forgotten a bolt), clean everything thoroughly, don’t neglect the RTV (eg Hondabond) in the corners, and don’t force anything. Be careful removing the spark plug tube donuts. It’s very easy to score the aluminum.

@NoNonsenseKnowHow 3 года назад

Thanks Karl. And I appreciate you adding some tips for others! I've done the same thing on engine covers once or twice before. Got to triple-check you have all the bolts off if the cover is being stubborn for sure. Willing to bet that has happened to everybody at some point or another

@djlancer88 7 месяцев назад

Thanks Carlos

@Gatorbags23 4 месяца назад

What do you mean RTV in the corners like of the gasket itself? After placing gasket in grooves RTV in all 4 corners before placing cover back on? Would like to know seen a video that said it wasn’t necessary

@79Zoro 2 года назад

good job!

@jessesalcido2562 3 года назад

Clean work easy and simple thanks !

@VirtualGaminPL Год назад

Did it today, fairly easy, biggest problem was getting the spark plug gasket and bolt ones becouse they were solid as a rock. 2-3h and was done. Not too bad for first time engine work

@Extinction.of.Innocense 2 года назад

Very Nice

@jamalsrour843 5 месяцев назад

Thank u so much

@danielcostea2882 4 месяца назад

Where do I get the bolt seals from? I need to do this for my son’s civic and watching this video was very informative and straightforward. Thanks.

@313comput 3 года назад

Do you know how to remove that wire harness thing thats between the cover and the airbox? I cannot figure out how and its in the way. My civic has studs in place of the back two bolts, so i have to lower the cover straight down.

@josephfleischmann6254 Год назад

Do you think the rod knocker arm assembly from a automatic can go on a manual engine for my 2001 Honda civic

@Icepressa 6 месяцев назад

Factory service manual says to put silicone on the recess by the cams,

@ArlenePillado 11 месяцев назад

Hey a lil question the camshaft plug were is it exactly

@declanosbourne62 2 года назад

Hey, that piece of metal sticking out at the back of the valve cover where the intake air cleaner hose connects to, what’s it’s call and is it easy to take out .? I’m painting my valve cover and that piece of metal isn’t on there but it’s on my valve cover that’s what on my car. Can I use a pliers and pulled it out.is there any glue hold it in.?

@Kpizzle85 Год назад

Question, when replacing the bolt seals, did you use new washers to mount the rubber gaskets to? I looked up some seal kits and it looks like they don’t come with the washers, just the rubber gaskets…also do you have a link for that seal driver ?

@fayemillare9079 Месяц назад

Do you have a link for the plug thats by the egr valve? Looking for the factory style that you can snap by the outside

@Jess88176 8 месяцев назад

Great video. To the point and stressing clean. Excellent. Subbed ✌🏼

@imranshah-ll1wk 2 года назад

Good job man forget the washer 😆

@reelest_1 2 года назад

Washer was on new seal

@Gatorbags23 4 месяца назад

Was the link from Amazon with blue colored cover gasket ok? The same one used in video?

@ericksanchezHN Год назад

Yes, the style that need to be removed opening the cover is a pain in the ass, always go with the one you can take out without opening the cover.

@kneebarx 2 года назад

hardest part was trying to remove the spark plug seals. if they are dry rotted the easiest way to remove it is to use a screwdriver to lightly CHISEL it out. BUT NOT from the bottom backside you have to do it from the top side looking down

@halfglassfull 4 месяца назад

Nice. My 2005 civic 1.7l center valve cover bolt leaks a little. That appears to be accessible without removing anything. Can I just pull the bolt by itself and replace the grommet without pulling the entire cover? Thanks

@NoNonsenseKnowHow 4 месяца назад

Yes

@garydantzler1 2 года назад

You did better than another I watched using a screw driver and a hammer to remove the seals. Not a good idea.

@jxcobenas 3 года назад

Wait so when u removed the screw seal from the washer at 6:30 do you keep washer off ?? I saw that u left it off so just want to make sure :)

@NoNonsenseKnowHow 3 года назад

No you don't leave them on unless your new seals don't have a built on washer

@matthewlee2989 2 года назад

Is a "good wipedown" on the inside of the cover fine? Or would it be a good idea to use degreaser?

@NoNonsenseKnowHow 2 года назад

Yes totally fine in my opinion. Unless you see chunky buildup, then you would want to remove that.

@matthewlee2989 2 года назад

@@NoNonsenseKnowHow Thanks. You also make removing the donut seals look relatively simple. I've torn the lips up despite being as gentle as possible. Any more tips on getting those out?

@NoNonsenseKnowHow 2 года назад

No problem, and yeah you just got to make sure they're hooked right on there and then pull up on them gradually. If you're too hard with it it will tend to tear them. Just make sure to try and not scratch and gauge up the cover. Which if you do it will be fine either way

@matthewlee2989 2 года назад

@@NoNonsenseKnowHow either I'm having a lapse in common sense, or I'm not hooking it underneath. I apply pressure slowly and gradually, then it either just slips out or cuts through from the bottom without the seal giving way.

@jimdaley2256 3 года назад

Valve camshaft plug. Hmm never heard of it. I've had my valve cover gasket replaced 2x in 3 years and still leaking. Is there a vcp on all Hondas

@NoNonsenseKnowHow 3 года назад

I'm actually not sure if yours has one or not. I'm thinking it does not

@NoNonsenseKnowHow 3 года назад

But if you look on the side of the head opposite of your belt you should be able to see if it does or doesn't

@jimdaley2256 3 года назад

@@NoNonsenseKnowHow I'll look tomorrow but mine is worse than the 1 you showed I have oil leaking into my spark plugs

@NoNonsenseKnowHow 3 года назад

Yeah that's the spark plug hole Donuts seals I showed in the video. It's possible possible that d new seals were pinched during installation. Unless you didn't replace them before. Need to make sure to get a complete valve cover gasket set that comes with those.

@jimdaley2256 3 года назад

@@NoNonsenseKnowHow they must have been pinched during installation