My quad won't start and I don't know what's wrong. Can anyone tell me when it is or could be? My starter and starter relay and brand new. The battery I have in her right now is a little 6 volt so its small. But please help
Check all the battery, relay,starter, and ground connections and make sure there tight!(probably already have) if there all tight you can test your relay by using a screw driver to short in between the battery and motor studs on the relay, i think there marked B and M, if it cranks the relay might be defective? really seems like a ground issue to me. I don't know. Hope this helps! good luck and don't electrify your self!!
Try putting the positive cable of a jumper cable to the positive side of the starter and ground to the case of the starter to see if the starter turns over if it does its your starter relay it can be bad right out of the box even if it's brand new
I’m having the same exact issue all I get is the clicking sound. I took it to a mechanic and he put the new solenoid switch I brought on and it crank only on full chock. When I push the throttle it cut off. So I cleaned the carb and rebuild the inside. I put another new solenoid switch on and now I’m getting the same clicking sound from the solenoid switch. CAN SOMEONE HELP ME OUT PLEASE.
Its your Timing it came out of place your going to need to buy a YAMAHA - KEY, WOODRUFF - 90280-03001-00 this is the part # this is what mine needed i had the same problem it would turn but wouldn't turn on trust me thats what you need i bought everything new and still wouldn't turn on and the hold time it was that dumb part
Jerron Barlow dumbass I have a Yamaha 660 raptor that been bored out and is now a 784 and the solenoid went out it’s not locked up dumbass and no one cares if you have all those fourwheelers
i bet it is dumb ass have the same year in my garage and does same shit u bunch of dumb ass kids its locked up pull the little side cover off and try and roll it over with socket wrench bet it locked