#1 Must-Do for Your Epson ET-8500 ET-8550 DTF Sublimation Conversion - Avoid 031006 Error Revealed!

Подписаться 51 тыс.

Просмотров 13 тыс.

50% 1

Hey DIY enthusiasts and printer repair buffs! Are you ready to unlock the full potential of your Epson ET-8550 printer with Sublimation or DTF printing? In our latest video, we've walked you through a comprehensive guide on converting your printer for sublimation and DTF printing. Say goodbye to ink leaks and printhead damage as we show you the crucial steps to waterproof your printhead, remove and reinstall it, and address common issues with Epson's design. Don't let printer problems hold you back - join us on this exciting journey to optimize your printer and achieve fantastic results! Subscribe, hit that like button, and let's get fixing! We will post the link to the whole RU-vid video in the comment section.
For other helpful videos, go to / bchtechnologies
🢡 ET-8550 ET8500 Printhead Cover Guard: tinyurl.com/23ksx3km
🢡 Silicone Seal: tinyurl.com/5n8xvzad
Compatibility:
For Epson Printhead DX10 EP-707A
FA09000
FA09030
FA09050
Compatible with:
XP600 XP610 XP630
XP700: XP721
XP800 XP 801 XP830
XP900: XP901... XP 950, XP-960
ET-8500 ET-8550
L8100: L8160, L8180...
For printer repair:
🢡 Visit us: BCH Technologies, 506 Radar Road, Suite B, Greensboro, NC 27410.
🢡 Send the printer for repair! bchtechnologies.com/printer-r... Yes! We repair DTF, DTG, and sublimation printers too!
🢡 Donate your printer to us! Contact support@bchtechnologies.com
More support options for your printer device are available at support.bchtechnologies.com
Continue the Conversation: support@bchtechnologies.com
FACEBOOK: / bchtechnologies
TWITTER: / bchtechnologies
INSTAGRAM: / kevinatbch
LINKEDIN: / bchtechnologies
TIKTOK: / kevinsinknmore
SHOP NOW: bchtechnologies.com
About BCH: BCH Technologies is an innovative company focusing on ink and related products. Founded in 2011, the company transforms how people and businesses refill their printers through innovative technology solutions. Our core purpose guides the research direction of 1) preventing land waste and 2) bringing customers better products with lower costs. Every day, over one million ink cartridges are thrown into landfills worldwide. The company has focused on working with businesses of different sizes, from Fortune 500 companies to entrepreneurial starters, to develop custom ink, spanning from printer ink to stamp ink, re-entry ink, indelible ink, redaction ink, invisible ink, and more.
This video was produced by Kevin at BCHTechnologies.com.
00:00:00 Epson ET-8550 Install Protective Cover Guard
00:00:24 Why we need to waterproof the printhead
00:00:59 Remove the printhead for ET-8550
00:02:15 Waterproof with silicone sealant
00:03:36 Install the printhead

Хобби

Опубликовано:

11 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@antoinettebrittman9627 8 месяцев назад

lmao what if you don’t have nuts?? 👀👀👀👀👀. Great video my guy!

@killmesoicanrespawn3775 Год назад

0:48 😂😭 you're too funny Kevin!

@BCHTechnologies Год назад

Thanks 🙏

@user-ly5qu3kj1c 11 месяцев назад

Good and brilliant technical skills. But next time, just remove or change the cover/manifold to ecosolvent adapter. Plug in XP 600 ecosolvent dampers and save yourself from unnecessary stress. i have converted more than 15pcs like that including P600/P800

@nigel8649 6 месяцев назад

Can I buy one from you?

@simplybeautiful3990 Год назад

Can you please make a video about how to solve the ET 8550 converted DTF paper sensor not recognizing the film please? Thank you in advance :)

@nigel8649 6 месяцев назад

I saw someone use masking tape on the leading edge of the film, be careful not to stretch the tape as you apply it.

@noobiekush 11 месяцев назад

Hi, new sub here. Have you had any issues after this? Has this lengthened the life span of the head?

@elizabethlangley9947 4 месяца назад

Hi Kevin, so it’s preferable to kit it out with seals and silicon, Ove order two of your kits for 2 X ET 8550 on order, any other advice as it is a major mis mantle. One will be DTF and the other SUB😊

@jessehavok4181 Год назад

I'm just looking to convert this printer to pigment inks. Does the same thing need to be done?

@abidemi-ibitoye Год назад

Hey, when can we expect this video for the XP15000? Thanks.

@BCHTechnologies Год назад

In few hours

@kmcustomsshop Год назад

I tried clicking the link for BCH's website but it shows server error. Any ideas? I'd love to seal my new printer so I don't have to keep replacing it

@marcomarquez-wx3zp 9 месяцев назад

i have a question does the 8550 printhead suck out the ink from cartridges trying to see how the printer functions

@queenb4king1 8 месяцев назад

How long does it take to dry?

@diva46226 Год назад

I took my rollers out for DTF ...Is there a way to put them back...

@Sylvester-it6rv Месяц назад

How do I convert and turn my big printer hp 7740 into a permanent sublimation printer?

@jcmoney11111 10 месяцев назад

Kevin, have you and your team figured out a better workaround for recognizing the DTF film being detected by the printer? I'm not entirely certain of where this sensor is but we have varying results with everyone's workarounds of using masking tape, paper etc

@nigel8649 6 месяцев назад

I may be wrong but putting masking tape on the leading edge seems to work. Don't stretch it.

@jcmoney11111 6 месяцев назад

@@nigel8649 yeah or use something a little bit more opaque when it comes to transfer paper. There's one brand that we use that seems to be just the right amount of opaqueness and rarely has any problems. I just now got my ET8550 back up after being in a bind while having a another printer down because of stupid mistakes arghh. I'm thinking about trying to tape over the sensor and see what happens on the et8550. It may be a surefire way to never have a cropped image or it may just think there's a paper jam the entire time, who knows?. The ribbon cable to the sensor is just right below the print head and can easily be disconnected as well, but to my knowledge nobody has tried disconnecting this or jumping it, would be a nice tidbit of knowledge, I may try in the future. I don't really have any idea what the hell Epson was thinking by putting a detect sensor down there. Anybody with common sense knows they have an image that fits on a certain sheet of material and they try to print it, why in the hell would we try on material too small. The paper detection should be based off of the width of the guidelines and print job. So goofy lol.

@WivezClub 4 месяца назад

@@jcmoney11111what paper type do you use ?

@jcmoney11111 4 месяца назад

@@WivezClub I'll have to check with my wife We don't use it as much it's kind of a backup printer in case of downtime with our 2 l1800s, but I will try to find out. Also note that I found where the sensor is that detects the film. It is a pain to get to but it is located right beside the print head mounted to the bottom side of the printhead carriage. I'm not sure if anybody's found a way to completely make it obsolete and not even be a factor. I'm not sure if completely deleting it or disconnecting it will help or if there's a way to just trick it every time, I'm waiting to see if somebody would ever test a surefire solution.

@tonyjenkins71 Год назад

If I paid. Could you convert my et8500?

@jcorypreston Год назад

👍

@theyloveiwn 8 месяцев назад

hello if ive already gotten error code is it to late to do this step

@erickamcbride4689 11 месяцев назад

My output tray is stuck open, can you help!?

@therealo3058 Год назад

I got a code 031002 after doing this 🤷🏽‍♂️ HELP!!!!

@rsapgreen8399 6 месяцев назад

This happened to me, had my printer for a week …. Smh still trying to get it repaired 🤦🏽‍♂️

@Ortzdav5 11 месяцев назад

I've heard mixed reviews about this, so im stuck in a limbo. I've heard this can cause overheating of printer head.

@Jedi-Mind-Solutions 11 месяцев назад

i'm about to decide buying these guards or not.. what did you do? and can you please tell me where did you read those reviews.. if we don't use these guards the printer eventually will give some shitty error code?

@Ortzdav5 11 месяцев назад

@Jedi-Mind-Solutions i asked a tech guy that fixes printers, and he told me he has mixed reviews about it that it could cause overheating errors but that it is a good guard that may cause overheating I myself have not picked one up yet. Im on the fence about it.

@Jedi-Mind-Solutions 11 месяцев назад

@@Ortzdav5 i see, thanks for the answer mate i'll decide too

@MilitaryMatters1 Год назад

.. Couldn't you technically just loosen up the ribbon cables, turn the print head over carefully, and cover the connections in Epoxy?

@albertcalvin4888 9 месяцев назад

Can i send you my printer and you fix it

@kmcustomsshop Год назад

Send me money to kick you in the nuts had me dying laughing

@dgraphic11 Месяц назад

NOT happy. Cover broke before installed. Couldnt reconnect cable GLUE everywhere. Instructions TOO FAST and not visible enough to know what I should be doing. NO INSTRUCTIONS came with glue and sides.

@dgraphic11 Месяц назад

Now it wont even turn on..what is happening!!!!

@okankurt5278 Год назад

hey kevin i want to make x size flatbed uv printing machine for myself where should i start which head control card can i use

@BCHTechnologies Год назад

First, you need to pick a printhead. Not all printheads are suitable for UV printing. Then, you can check out the DTG groups. For example, www.opendtg.com. I don't know any UV groups do the flatbed, but DTG groups have all the designs and mods that you can download and purchase.