Thanks for the help. My E2 came apart OK, but I doubt these razors could withstand multiple cycles of being taken apart and assembled given the amount of force required to get the parts back together. I wouldn't do this again unless my razor internals were seriously gunked up or I was preparing the razor for plating. I'll stick to ultrasonic cleaning in the future.
Hi David, my fat boy 1959 has a c clamp on the rod, just after the threads, so I can't disassemble it with out a special tool to remove it and put it in place again :-( Nice video man. Thanks for sharing. Cheers from Norway
@Jooky1 - I will have another video on how to reassemble after I get this replated. @neo71665 - The 1960 and newer use a crimp-style retention system. The first step is different, but the rest are the same. Use a .223 shell casing (or something close in hollow diameter) and a hammer to drive the crimp into the body of the handle. The crimp will come loose and you'll be at step two.
Deadbuck73 neonknight6 I haven't disassembled the Super Adjustable, just a deep cleaning with an ultrasonic cleaner. panchoskywalker Make sure the knob is dialed all the way out and the head should pull out. @Neil Hawkins That's right. Reassembly is the opposite of disassembly. I was going to get this plated before reassembling, but never got around to it. Peter Cole If you have money for that...feel free. It's not hard.
Hi David, I have a Gillette Super Adjustable (made in the 1970s) which does not bend the blade in the lower positions (1-2-etc..). Have you ever disassembled that type? Does it have the same mechanics inside?
If there’s a screw in the bottom, disassembly “should” be possible. If it’s a snap disk, then you won’t be able to get it apart/back together that easily. Good luck!
If there’s a screw in the bottom, disassembly “should” be possible. If it’s a snap disk, then you won’t be able to get it apart/back together that easily. Good luck!