No video :(

1967-72 Chevy & GMC Truck Lowered Seat Bracket Installation

Подписаться 94 тыс.

Просмотров 20 тыс.

50% 1

Direct Product Link: bit.ly/2lBglzO
This is a must have for anyone who has noticed that the original seat position is TOO HIGH in the cab. These brackets correct the line of sight through your windshield, pedal angles, seating position and overall comfort-ability of the stock bench seat. We've designed these brackets to solve all of these issues with minimal install time and effort. These brackets will lower the seat approximately 2 inches. It was necessary to eliminate the factory sliding function in order to get the desired drop, so BROTHERS corrected this by adding slotted mounting holes to allow 1-1/4" fore and aft adjust ability. You're going to love the extra room this custom bracket set gives you! Check out more custom items for your 1947-1987 Chevy or GMC Pickup at www.brotherstrucks.com

Опубликовано:

25 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@briansiemers9462 3 месяца назад

This is the cool smart uncle we all love to have in our lives. These videos are so informative and very thorough.

@rockyp544 5 лет назад

Love mine.. pair up with a jbl shallow mount sub behind the seat and it’s a perfect set up

@robertkletke9024 Год назад

This will be the first thing I do when I buy my truck here soon I'm 6'3 n it's tight same with my brother n I'll be getting a performance steering column and smaller steering wheel

@sethirmiter9406 4 года назад

I bought it and love it... I do find it funny though that he had the seat slide all the way forward! Good marketing fellas!

@BROTHERSTruckPartsTV 4 года назад

Glad you like the drop brackets, we've had killer feedback on them so far! FWIW, the 67-70 seat (the one in this truck) has 2" more "lean" than the 71-72 seat, so it's almost impossible to slide the OG slides all the way back without the back of the seat hitting the cab below the window. You'll notice that the back of the seat, before the brackets are installed, is right up against the cab while Dave is demonstrating how little room there is. No attempt at marketing, just real world cramped cabs in these classics.

@maryfinchum9741 Год назад

Do they ajust

@BROTHERSTruckPartsTV Год назад

Yes, but not on the fly.

@Luketesky 7 месяцев назад

They dont fit like you would think. I have the correct ones too. If you want the seat all the way back like factory they wont work

@Jdthomas1000 3 года назад

Just received my mounts and looking forward to getting these mounted. The bolts they came with look like they’re the floor mounts. Do they come with the bolts for the bench seat? Do you know what size of bolt goes into the bench seat?

@BROTHERSTruckPartsTV 3 года назад

All the bolts are the same size, 5/16x18

@keiththecarguy1967 5 лет назад

Great idea for us taller guys..... Sign me up!

@Anth4044 3 года назад

My freaking tracking front bolts on my bench seat I can't get to I can't put a socket or wrench. Does the upholstery have to be stripped because I just got the seat reupholstered. Does anyone have a answer for me thanks.

@BROTHERSTruckPartsTV 3 года назад

We've never run across that before. Contact the shop and we'll give you a phone number you can text photos to. Maybe that will help us help you.

@Anth4044 3 года назад

@@BROTHERSTruckPartsTV Ok sounds good thanks so much 👍

@themextex2454 Год назад

So you eliminated the seat cable adjuster?

@maryfinchum9741 Год назад

Hey Dave I need to know how , the bench seat adjustment cable works can you help us out ? Thanks

@BROTHERSTruckPartsTV Год назад

it simply attaches the left side to the right so that when you pull the lever on the Drivers side the Passenger side also gets released.

@haydenjarnagin1503 2 года назад

I’m a bigger taller guy should I get these or the regular tracks

@BROTHERSTruckPartsTV 2 года назад

Either way, these trucks aren't exactly favorable for tall guys, however Dave is also a Tall guy and he says this is how the truck should have felt from the factory.

@haydenjarnagin1503 2 года назад

@@BROTHERSTruckPartsTV thank just orders the low one

@kingzebjr10 4 года назад

Does it have as much room for readjustment with the factory gas tank still in the cab?

@BROTHERSTruckPartsTV 4 года назад

Yes, even with the factory tank you can adjust the seat all the way back to where it will touch the cab.

@jongigliotti640 4 года назад

Is the seat still adjustable front to back, or is it in a fixed position?

@BROTHERSTruckPartsTV 4 года назад

Yes, still adjusts approximately 1.5 inches front to back.

@streetfinch4453 3 года назад

Does it matter what year bench seat the truck came from?

@BROTHERSTruckPartsTV 3 года назад

Yes, 100%. You need to know if it came from a 67-70 or a 71-72.

@guadalupeacevedo7236 Год назад

Brackets did not bolt up had to do some trimming on the front brackets and had to cut some off the rear.

@BROTHERSTruckPartsTV Год назад

Modifying our brackets is 100% unnecessary. You probably don't have the correct seat frame in your truck that matches the year of the truck. What you described only happens when you use 67-70 brackets on a 71-72 seat or vice versa.

@gregmccoy8616 Год назад

Same here these things don’t fit…

@gregmccoy8616 Год назад

@@BROTHERSTruckPartsTV the part clearly say 67-72 on the site and does n’t specify the exact year. I have a OEM seat.

@wlehtola 4 года назад

I'm looking at a 76 with this same issue. I'd snap it up if I could find a way to drop the seat down

@BROTHERSTruckPartsTV 4 года назад

Due to the framework of the Squarebody, the seats already sit considerably lower than the previous trucks did. Unfortunately that makes it basically impossible to drop the seat just by changing the mounts.

@wlehtola 4 года назад

@@BROTHERSTruckPartsTV somebody must have told me the wrong year or they put in a different seat, my fist barely fits between the seat and steering wheel

@wlehtola 4 года назад

@@BROTHERSTruckPartsTV if that's considerably lower I'd hate to see the first ones