1999 - 2004 F250 F350 4WD Front Shock Replacement

Подписаться 10 тыс.

Просмотров 141 тыс.

50% 1

How to change your front shocks on a 2001 F350 7.3L 4WD Super Duty Lariat Crew Cab SRW
Shock P/N: Monroe 911195 Front Shock Absorber for 99-04 Ford Super Duty Truck 4WD
"IF" you have the SWING ARM front end use "innocuous_name"'s video here: • How to Replace the Fro...
Do a Amazon search here: www.amazon.com... Enter your truck then pull up only 4 stars or better. I try to always choose one that has at least 20 or more views and read the comments!
Interchange Part Numbers: 344077, KG5441, G63809, 911195, 77809, KG5043
Other Part Numbers: 344412, 1924077, KYB344077, 382 18057 424, 1844171
Or you can put some KYB's back on here: www.summitraci... $59.95 ea. Plus Shipping .
Recommended Chemicals: Lubricating Oil, i.e. PB Blaster, WD-40 etc.
Minimum Tools Required:
21mm Combination Wrench
18mm Combination Wrench
15mm Combination Wrench
Medium Duty Jack Stand
2 1/2 Ton Hydraulic Floor Jack
Wheel Chock, or 4"x4"x12" block of wood (no 2"x4" block)
Lug nut Wrench, prefer Star Wrench
Lug nut Security Key if you have wheel locks
Ball peen Hammer, Medium
6 inch Punch
12" Pry bar or larger
6" Side Cutters (Dikes)
Recommended Additional Tools:
1/2" Torque Wrench
3/8" drive 6" Stubby Ratchet
3/8" to 1/2" Drive Adapter
1/2" Drive 21mm Deep Socket
1/2" Drive 18mm Deep Socket
1/2" Drive 15mm Deep Socket
Mechanics Seat
Wire Brush, Small
Shop Rag
****** If you use a Torque Wrench set it on 70lb's or higher so you won't damage the wrench. when Tightening set it to the correct Torque Spec or just snug them up.
Torque Wrenches are NOT Breaker bars and can be damaged.
If you set the Torque higher than the bolt will come loose it's HIGHLY unlikely that the wrench will be damaged. Cheap 1/2" Torque Wrenches are around $39.00 dollars, cheaper than a shorter 1/2" drive ratchet and they provide more leverage so that's why you see me use them a lot in my videos. I have done this for over 30years and have NEVER damaged a Torque Wrench, I've even taken them to a calibration lab to have them checked with no damage or drift in torque. So using a Torque Wrench as a breaker bar or as a ratchet is VERY UNLIKELY to damage it, however using it at the incorrect setting WILL damage it. Use your Torque Wrench in the manner you wish at your own risk.
Nay Sayers, don't waste your time I WILL laugh at you for just repeating what someone else has told you, with NO facts to back it up. Then I will laugh at your inexperience in this area. Remember I've got 30 years doing it that way with NO problems or damage to my Torque Wrenches. With a Calibration Laboratory verification. If you have proof put a video up and link me, otherwise you're just repeating unfounded information.
Comments welcome, to expound on my video to help others. Thanks for watching. Best Wishes & Blessings. Keith Noneya

Опубликовано:

16 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 192

@FredFlintstone21 5 лет назад

Somebody commented they dont pull the tire off or jack it up. It took me just a few minutes to yank the tire, and it was way easier to get er done!

@nixterm 8 лет назад

This is one of the best how-to videos I've seen. Thank you for showing the tools and socket sizes required and recommended. That saved me a ton of time.

@keithnoneya 8 лет назад

+Nick M You're welcome that's exactly why I did it that way. When I go to a YT video I like to know what I need before I even start the job. Thanks for the comment. Best Wishes n Blessings Keith

@hesson81 3 года назад

Totally agree.. Good angles and I can actually see what he's doing .

@AlphaBobFloridaOverlord 2 года назад

Thank you for the safety tips - I came EXTREMELY close to being crushed under a car as a teenager when the vehicle slipped off the jack stands. For the last 45 years (yes, I'm now old - haha!) I always leave the jack in place, slide the tire under the car, and double check the jack stands.

@keithnoneya 2 года назад

It's been awhile since I watched my own video, but it's something I try to put in all my videos that involve raising and crawling under a vehicle. When I was about 16, I'm old now too, my brother in law and dad removed a drive line on a car that was on a slopping driveway. They forgot to chock the wheels and when they removed the Driveline the car rolled off the jack stands and on top of them. They had placed extra safety blocks under the car and it saved their lives, something I never forgot. I was also in the U.S. Navy and we used to have Safety Briefs. In several of the briefs, over the 20 years I was in, there would occasionally be one where a service member had a jack fail and the car would fall and crush them to death. One in particular was about a 1st Class Petty Officer who's wife came home to find her husband dead under their car in the driveway. I never forgot those events. Thanks for watching and the relevant comment. Best Wishes & Blessings. Be safe my friend. Keith Noneya

@shtee3722 4 года назад

Thanks for the helpful video. Just finished installing 4 Bilstein 5100’s on my 99 F350 and this helped a lot. Also gave a thumbs up. Thank ya sir!

@keithnoneya 4 года назад

Glad it helped Sh Tee. You can go wrong with them Blisteins. Best Wishes & Blessings. Keith Noneya

@reysalazar6115 4 года назад

Simple, straightforward and most of all you reinforced the safety aspect as well. Thank you!

@keithnoneya 4 года назад

Thanks Rey, I'm glad you liked it, thanks for watching. Best Wishes & Blessings. Keith Noneya

@SuperDuty23XL 8 месяцев назад

Good instructions; thanks for the detailed video. My F350 is a newer model but I learn something from a video like yours even though the truck is different year. Look forward to changing mine.

@keithnoneya 8 месяцев назад

You're welcome SD23, glad it was useful for you. Thanks for watching. Best Wishes & Blessings. Keith Noneya

@burbman60 4 года назад

Thanks Keith, really appreciate you making this video. I have this job in my near future and wanted to brush up on what it was going to take. Thanks again. Tomas G.

@keithnoneya 4 года назад

No problem bud. Been there done that, that's why I made it. Thanks for watching. Best Wishes & Blessings. Keith Noneya

@unrealapp 6 лет назад

Thanks for the video, i really appreciate all the people who post these How-To's on youtube just to spread knowledge. Probably going to change out my front shocks to the Fox 2.0 Performance IFPs this week.

@keithnoneya 6 лет назад

Thanks U-App I appreciate the nice comment. Thanks for watching. Best Wishes n Blessings. Keith Noneya

@FredFlintstone21 5 лет назад

I cant wait to drive my 02 excursion with a 7.3. New bilsteins, new steering stabilizer, I pulled the k&n intake and installed motorcraft severe duty intake. I dont drive it in the winter. Live in area where they salt the roads and I wanna keep my ride rust free

@Richard5873 4 года назад

Have You put Bilsteins on Your Excursion ?

@keithnoneya 8 лет назад

Yep shops do cost money, remember though that you're not just paying for the part you're also paying for the convenience and the overhead they have. They have to pay the mechanics sometimes even if no work comes in, or they loose them and their skills. As a home mechanic the only overhead we have is if we rent a tool. They have, just to name a few: 1. Building Rent, plus taxes. 2. Licenses, Government Overhead. 3. Sales Taxes, Government Overhead. 4. Matched SSN for Employees, Government Overhead. 5. Heath Care programs, Government Mandated Overhead. 6. USAGE FEES, Government Overhead, Usage Fee is if you "OWN" equipment, you have to pay the government to use your own equipment every year even if you own it and paid the purchase taxes on it. 7. Inventory Tax, If you have inventory, parts etc., left over at the end of the year you have to pay a second tax on it to keep it, Government Overhead. 8. Property Tax, Government Overhead. 9. Grounds/Building up keep, no one wants to go to a dump to get their vehicle fixed. 10. Electricity, plus taxes. 11. Sewage & Water plus taxes. 12. Garbage, plus taxes. 13. Hazmat Fees and Licenses, plus taxes. 14. If you have anything left over at the end of the year and turn a profit then you get to pay income tax on it! 15. Web fees, plus taxes. 16. Phone fees, plus taxes. 17. Corporate fees if you have a franchise, plus taxes. 18. Oh I forgot one, You have to pay those grumbling Employee's and others too! You see to start a business you have to be crazy, you put up all the cash, and put liens on everything you own so that if you go out of business you loose everything. Then the Government comes in and says give us some, "Mafia Style Protection Money" or sorry wrong words, see #'s 2 thru 8 above. Then you get to deal with the Socialist Employees and Unions that come in and say: "Hey man you're rich we want equal shares". I only found this out because I have a friend who has over a million dollars in equipment. When times got tough I said why don't you just close up shop for awhile or scale back. He laughed and said they Government would come and take all my equipment. Then he explained Usage Tax, Inventory Taxes and the rest to me, I was totally shocked at how hard it is to stay in business in the US, I had no idea the Government was sticking it so hard to employers in our country. So yes they want $400.00 bucks to install those shocks. Oh I forgot another one, Legal fees for lawyers to protect you from all those Sue happy customers, scammers and Union or bad employees that show up constantly, and want their "fair Share". Like Obama and the Socialist Democrats say, "They Need to Pay, their Fair Share!" In the words of Dr. Raymond Cocteau, "Be Well" LOL Best Wishes n Blessing Keith, and that is your business lesson for today folks.

@squid_garage756 7 лет назад

Keith Noneya is it any different for a 2wd model ?

@keithnoneya 7 лет назад

I'm not really sure since I only have a 4WD, but that's easy to check just skip to time index 13:12 in the video and then look at your truck to see if it's mounted the same. If it's the same let me know and I'll put it in the description for others. Best Wishes n Blessings. Keith

@squid_garage756 7 лет назад

Keith Noneya ok thanks, i will get back with you

@takeschances 6 лет назад

Question just bought a f250 super duty 4x4 does the shock or struts come on one size or differnt sizes ? Mines look lifted but the shock are bad u here every lil hole mines is as easy as the kne u just did let me know

@keithnoneya 6 лет назад

Hey Gelson, sorry I just saw your post, I don't remember getting a notification that I had a comment pending. I don't always get the notifications. I suppose by now you have it figured out, but if not drop me a line. PS I worked on the A&B's at VFA-305 Pt. Mugu the early 90's and was in VAQ-137 the 'Rooks" & VAQ-309 "Axemen" in the 80's, they were EA-6B's then, EXCAP, ICAP II both blocks and VAQ-309 had EA=6A's back then before they switched to the B's. The new E & F's look awesome, would love to work on those. I still have one of the old squadron 24" VAQ-309 Stickers on Plexiglas from my AT 210 shop hanging on my garage wall, LOL. Anyway feel free to drop me line ZAPPER! Best Wishes n Blessings. Keith Noneya AT1 USN/USNR-(TAR/FTS) Retired If you're ever at JRB New Orleans drop by the D Level Bldg 559 and ask for the CASS tech.

@ericmorrison2811 2 года назад

Nice work! Thanks for calling out all of the necessary tools.

@keithnoneya 2 года назад

You're welcome Eric. I try to ensure whoever watches my videos has a complete list of; Parts, Tools, Optional Tools, Consumables and a list of Chemicals needed to do the job. Thanks for watching and commenting. Best Wishes & Blessings. Keith Noneya

@hesson81 3 года назад

Best video on RU-vid for this job.. Thank you.. imma do this tomorrow. I hope O'Reilly's has them in stock..

@keithnoneya 3 года назад

Thanks Hesson. It's one of my early videos and one of the most popular out of my F350 series. Thanks for watching and glad it helped. Best Wishes and Blessings. Keith Noneya

@hesson81 3 года назад

@@keithnoneya replaced mine without a hitch.. love saving that labor cost!! Thanks for the vid..

@keithnoneya 3 года назад

@@hesson81 Thanks Hesson, much appreciated. Best Wishes & Blessings. Keith Noneya

@tonyspangler1201 4 года назад

Thank you for taking the time to make this video

@keithnoneya 4 года назад

My pleasure Tony. Best Wishes & Blessings. Keith Noneya

@richardhyde6418 7 лет назад

Great Video......Well focused and great commentary. Thanks for posting.

@keithnoneya 7 лет назад

Thanks Richard, nice pan flute figure, AZ Indian or just like the figure? Best Wishes n Blessings. Keith

@richardhyde6418 7 лет назад

Haha Thanks........Thats my Kokopelli Logo for my Craft Cider Company......As you can see he is drinking from a pint glass that is partly empty.

@FredFlintstone21 5 лет назад

Your voice sounds like actor Gary Sinise. Awesome video thanks for sharing!

@keithnoneya 5 лет назад

That's funny I had another viewer say I sounded like some comedian he watches some times, LOL. Thanks for watching. Best Wishes n Blessings. Keith Noneya

@briannielsen7176 4 года назад

I removed the shocks with the wheels still on. I didn't even jack the truck up. I used a long extension to get the top bolt off. I also put heat to the bolts after the penetrating oil.

@keithnoneya 4 года назад

Some people find it easier to do it that way and some find it easier to pull the tire. I usually pull the tire to do a brake and a area safety inspection at the same time. Thanks for watching. Best Wises & Blessings. Keith Noneya

@ronfronheiser4866 4 года назад

Ohhhhhhh.......you gotta "double combination yer wrenches" :) Thanks! Great video!

@keithnoneya 4 года назад

LOL yeah it's a pretty easy job to do. Thanks for the comment. Best wishes & Blessings. Keith Noneya

@treykiendl1222 Год назад

about to go dive in to the project! Thanks for the run through

@keithnoneya Год назад

Have fun! It's not to hard, hope all went well with your project. Thanks for the thanks and watching. Best Wishes & Blessings. Keith Noneya

@elaineekberg113 6 лет назад

Love that you showed the process instead of turning the camera off. Do they make Go-Pro's with a head attachment? Lol.

@keithnoneya 6 лет назад

Yeh not the steadiest one handed camera man, but it's got what ya need to get the job done. Thanks for the nice comment. Hope all goes well for ya. Best Wishes n Blessings. Keith Noneya

@GaryT1952 4 года назад

Great job, thanks for the upload. You've got a great instructional voice, sounds like Brad Pitt

@keithnoneya 4 года назад

Wow, thanks Borris! LOL. Best Wishes & Blessings. Keith Noneya

@ddhts 4 года назад

Thanks! Helped alot...appreeciate the detail!

@keithnoneya 4 года назад

Glad it helped! Thanks for watching. Best Wishes & Blessings. Keith Noneya

@rhettgoodwin9218 2 года назад

It’s a great video! But I would never use a torque wrench to loosen a nut like that

@keithnoneya 2 года назад

Thanks for the nice comment the Torque Wrench makes a cheap long Ratchet. If you put the setting all the way up you can use it as a ratchet with absolutely not damage or ill effects to the Torque Wrench, but you have to remember to raise the level or you could seriously damage it. After you remove the bolt make sure and lower the setting all the way down before storing it. If the bolts are really corroded or you expect the torque to be higher than the Torques Wrench can go, use a Breaker Bar instead. If the Torque Wrench is an expensive one then I wouldn't recommend it, so if you can afford a long 1/2" drive Ratchet or a Breaker Bar that would be the better way to go in every instance. In this case I knew the bolts weren't on very tight so I got lazy and didn't feel like using the Breaker Bar. Glad you liked the video other than that and I hope it helped. Best Wishes & Blessings. Keith Noneya

@austinvestal405 8 лет назад

hey man thanks never thought it could be so easy I'm going to be doing my 2003 turbo reall soon thanks to your help ! thumbs up

@keithnoneya 8 лет назад

That's awesome Austin, glad to help. Heck I never thought this little video would do so well, 12,652 views in 11 months for a very specific, basically a none entertainment video. Those video usually get hundreds of thousands of views. I put this one up after I had a hard time finding one on the shocks. I said to myself, "Man with all these trucks out here I can't believe someone hasn't done one for these years". Thanks for watching Austin. Hey I've done some more videos on my truck, here's a link to the other things I've done on it: ru-vid.com/group/PLVLXGvrQp0OtT4QJeMKZ764rC2A87eiXz Feel free to ask any questions. PS. Do me a small favor please and hit the subscribe button. I'm gonna try to hit the 1,000 subscribers this year. Best Wishes and Blessings Keith

@JustinMikola 4 года назад

Bilstien shocks coming in this week. Thanks for the video! Liked and subbed.

@keithnoneya 4 года назад

Thanks Justin, Best Wishes & Blessings to you and your truck. Keith Noneya

@diceman220 9 лет назад

Great job. Information always makes any job easier. Thanks

@keithnoneya 9 лет назад

+diceman220 You're welcome. Hope it helped as intended. Best Wishes n Blessings Keith

@diceman220 8 лет назад

Installed all 4 today.

@un-limited7009 4 года назад

Thanks. I have an F250-HD 4x4 1997. Stock height. I would like to know what shocks are the best?

@keithnoneya 4 года назад

Hi Dave from the comments below most folks tell me they have had great success with Bilsteins and KYB's. The ones I took off were KYB's. I drive in car pool and it was my turn to drive the next work day. So I just chose some adequate shocks off the shelf at the auto parts store. If I had had more time I would have chosen either of those two I mentioned. eBay will give you the best price and Amazon the quickest shipping, if you have Prime. Hope all works out good for you. Follow the links in the description above to those shock choices and more. Best Wishes & Blessings. Keith Noneya

@tommycvetanovski8263 2 года назад

Great Video thanks for creating it. I did this to my 2002 F250

@keithnoneya 2 года назад

My pleasure Tommy glad it helped. Thanks for watching. Keep and eye on the channel I have and put up F250/350 videos from time to time. Best Wishes & Blessings. Keith Noneya

@chriswarrick6538 7 лет назад

My Bilstein shocks for the rear of my 2000 4wd f250 just came in today...they do not come with a flexible boot...its a soft rigid blue cover and it mounts blue upwards.

@allb4dinner962 3 года назад

I know this might be off topic but my front leaf springs are flat kinda like yours is that normal or should they be replaced

@keithnoneya 3 года назад

A really good question, I think it's normal as I don't have steering issues or any other problems I've noticed. Also best I remember everyone else's leaf springs look the same. You can check out this video on a stock non-lifted 99 getting the ball joints replaced; ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-99WdB37czZM.html His Leaf Springs look the same as mine. If you find out differently let us all know. Thanks for watching. I hope the rest of the video was useful to you. Best Wishes & Blessings. Keith Noneya

@allb4dinner962 3 года назад

Well the reason I ask is that my camber is off I was originally looking for camber adjustment but realized they are not adjustable unless I put in some adjustable ones just wondering if the weak springs are the culprit thanks for info though

@jordanpayne8144 3 года назад

Thank you for this video

@keithnoneya 3 года назад

You're welcome Jordan. Thanks for watching. Best Wishes & Blessings. Keith Noneya

@jordanpayne8144 3 года назад

@@keithnoneya thanks for taking the time to say your welcome. A fleeting quality and courtesy in today's age.... #yeshuaswarrior #gratefulliving

@patrickwhelan5703 5 лет назад

You need to do more videos for the Ford f 250 series/350 series. Is the rear shock switch out the same? Great video and tool supply list info. Thanks!!!

@keithnoneya 5 лет назад

Thanks Patrick. The truck is just so reliable that I don't have to fix to many things on it. I have a few more in edit mode. When I get time I'll finish them up and post them in about a month or so. The rear shock is similar, you have to remove the spare tire and the top of the shock has a stud instead of a bolt, other than that it's the same. Thanks for watching. Best Wishes & Blessings. Keith Noneya

@velocityturbosuzuki 6 лет назад

Great video sir I'm gonna try to change the shocks on my 02 7.3.

@keithnoneya 6 лет назад

Hi Mike! Thanks for the Happy Father's Day Text. The back ones are pretty easy too, but you have to remove the spare tire to get to the top bolts. Other than that it's pretty easy. Oh I would choose a better shock like the ones I took off, like the KYB MonoMax 565044, the price is about the same if you shop around. Here's a link: www.summitracing.com/parts/kyb-565044/overview/year/2001/make/ford/model/f-350-super-duty/submodel/lariat They also have some on eBay check the SHOW MORE tab above for the links. PS how's that starter working there PAL, hope you got those battery terminals changed! LOL Best Wishes n Blessings. Keith Noneya

@leadweightguy6134 5 лет назад

Nice and thorough, much appreciated!

@keithnoneya 5 лет назад

Thanks for the thanks. Best Wishes & Blessings. Keith Noneya

@travgusmc 8 лет назад

Thanks man! Installing my Bilsteins tomorrow!

@keithnoneya 8 лет назад

+Travis Gregory You're welcome Travis hope all goes well. Keith

@deadsypadilla 5 лет назад

Finished before the end of video

@keithnoneya 5 лет назад

You're welcome Deadsy, LOL love the screen name. Yep it's pretty straight fwd. Thanks for watching. Best Wishes n Blessings. Keith Noneya

@jonathanramirezms13 4 года назад

Is this the same for a 2004 Ford f250

@keithnoneya 4 года назад

After doing some research I'm not entirely sure. If you have the 4wd I believe it is, if you don't have the 4wd I don't think so. The 4wd I think uses leaf springs up front so it's just like the 99-2003, but if you have a 2wd it has swing arms and the top of the front shocks have a stud rather than a loop hole. you can see the difference in shocks here: www.1aauto.com/search?q=shock+absorber&year=2004&model=2162&searchQuery=shock+absorber Mine is a 2001 4wd with leaf springs. If you have the leaf springs use this video. If you have the swing arm use "innocuous_name" video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BGQh3UhgNKc.html Hope this helps with the confusion. Best Wishes & Blessings. Keith Noneya

@jonathanramirezms13 4 года назад

The one I have is 4wd

@jonathanramirezms13 4 года назад

Thank you it was alot of help

@keithnoneya 4 года назад

@@jonathanramirezms13 Glad to help. Just hit the like for me and we're square Jon. Thanks for watching. Best Wishes & Blessings. Keith Noneya

@chriswarrick6538 7 лет назад

i was expecting to mount the cool blue boots to the top where they would be seen (my way of pimping my ride lol) ..then i noticed the Bilstein emblem is upside down..sure enough the website on shockwarehouse says to mount the boot down on Fords..the end of the boot has DRAIN holes.

@keithnoneya 7 лет назад

wow that's interesting. Could you send me that link so when I go to replace these I can take a look at them. Thanks Chris. Best Wishes n Blessings. Keith

@atv55803 4 года назад

IM NOT SURE IF U KNOW BUT THOSE ARE KYB MONO MAX THE BEST SHOCKS EVER THERE STIFF AS HELL ,,SUPER TOUGH SHOCKS I WOULD NEVER TAKE EM OFF THERE LOOKING FINE

@keithnoneya 4 года назад

Yep I sure am. They were great until they blew the seals and sprayed oil all over the shocks and my truck started riding like Uncle bucks car. I just put those on it until I got some better shocks. Also I wanted to make a video on how to change the shocks not on the types of shocks. I drive in carpool and I had to have those shocks on that night, and I wasn't about to pay retail for the KYB's at an autoparts store, so those went on that night. All shocks good or bad die in their own time, I was sorry to see the KYB's go. Sniff sniff. Thanks for the reminder, I agree with you 100%. Thanks for watching. Best Wishes & Blessings. Keith Noneya

@stoney139 7 лет назад

Excellent video. Great help!!! Detailed explanations with handy dandy helpful tips. Thanks!!!

@keithnoneya 7 лет назад

Thanks Stoney, I appreciate the nice comment. That's why I made it. Best Wishes n Blessings. Keith

@jessejames6923 7 лет назад

those kyb shock you pulled off are 10 times better than what you put on

@keithnoneya 7 лет назад

Yep you are 100% right. One exception, the condition of the shocks they were leaking oil as the seals were bad. Also since I only drive the freeway now so the ones I put on will do the same job on the freeway at half the price. It's not that I don't want the best, I do, I'm just not willing to pay for something I can take the full advantage of until I need it. I've owned the truck for years and have only used FWD twice. I purchased it to tow a trailer and go live out in the desert after my step mom died and my dad needed me. The trailer got stolen before we could get insurance on it and my dad got over his depression while we were in court trying to resolve it. Didn't see a need to sell that nice truck so we kept it knowing we would use it on the family 400 acre farm some day. Until that day comes I occasional haul sheet rock and building supplies. Thanks for the link, I looked them up and put it in the description. I actually look fwd to the day I can have a good reason to go off road and upgrade the truck for it. Feel free to drop some more Ideas, this is our first truck. I'm normally a hot rod and mini-van swamp living guy wishing I was in the mountains going off road, AHHH, what a screwed up life I've created here! Thanks for watching. Best Wishes n Blessings Keith.

@keithnoneya 7 лет назад

The one you saw that I took off was the good one of the two. The other one was pretty bad. I think they have been on that truck for 10 years or longer. The new ones definitely made a big difference in the passenger side ride. I felt like Uncle Buck going down the road. Wish I had spent a few extra bucks and bought the KYB's they look cooler! LOL Keith

@TheSonsOfSimon 5 лет назад

Awesome video. Thanks!

@keithnoneya 5 лет назад

Let us know how it goes and if you have any questions. Thanks for watching. Best Wishes & Blessings. Keith Noneya

@craigroberts1666 4 года назад

Liked your video I see you put some Monroe shocks on do you recommend them I have anon lifted F 250 2003 which I dont pull big loads with anymore thinking working load range not extremely stiff? Craig

@keithnoneya 4 года назад

Hi Craig, my truck isn't lifted, and I don't off road it. I would check out some forums or go to the manufacture who produced your lift kit and ask them what they recommend. If it's a no name kit, do some research on other kits of the same height and design, then use the recommended Shocks for those kits. Hope that helps point you in the right direction. Best Wishes & Blessings. Keith Noneya

@craigroberts1666 4 года назад

Thanks for the reply I am not lifted and was thinking of some good Monroe gas or Bilstein.

@keithnoneya 4 года назад

@@craigroberts1666 Craig Roberts Well these have done good for me, but they were supposed to be temporary. I would just get a nice set of shocks if you can afford them, especially if your truck is still in nice condition. The once I took off were pretty nice. There's a link in the description if you would like a set of those. Best Wishes & Blessings. Keith Noneya

@skipstein744 7 лет назад

Thanks for the instructions, much help! Skip

@Cedarsquarewelding 7 лет назад

How did the monomax hold up? fixing to install them on my excursion. How long did you have them on before you replaced? great video. thanks

@keithnoneya 7 лет назад

I purchased the truck with them on it, and the truck had around 178,000 miles on it when I got it. As far as the Monroes I put on they are holding up just fine, but I'm not an avid off roader. Sorry I don't have anymore info on them. I would check out some forums on that question to get specifics. Best Wishes n Blessings. Keith PS feel free to ask any questions. Keith

@jessejames6923 7 лет назад

those kyb`s were times better shock than what you put on wow sell me the kybs

@rider3844 3 года назад

Good video bro thanks for the help

@keithnoneya 3 года назад

Not a problem, thanks for the thanks. Best Wishes & Blessings. Keith Noneya

@0714will 8 лет назад

Well nice! Good vid. You probably put more thought into this than anyone I know. Super help for the newbs! Any help on the Great "Shock Debate". I'm wondering what to put under a 2000 Superduty on the front. It has the plow package springs. So damn many arguments. Ugh. I don't know what to buy???

@keithnoneya 8 лет назад

I can't really help you on that one, shocks aren't my thing. Wish I knew more about them myself. I put a set of new shocks on my van and it's still a little bouncy for me. I'd just go check out the forums and ask who has a plow and what shocks are you using. Also don't dismiss the manufacturer of the plow package too. Drop them a line I'm sure they'ed know what to put on your truck. Thanks for the comment and the thumbs up. Best Wishes n Blessings keith

@eddiefannin1436 7 лет назад

thanks brother you helped me out a lot

@keithnoneya 7 лет назад

Glad to be of service. LOL Thanks for watching. Keith

@garylong7096 6 лет назад

Nice job, thanks.

@griffindeluce 9 лет назад

Nice tight edit! Thanks.

@keithnoneya 9 лет назад

+Griffin de Luce You're welcome Griffin. If you're interested in F350's let me know if there's another video I can do. If I get the chance i'll do it for you.

@jeffe5833 8 лет назад

Thanks brotha, PB Blaster saves knuckles.

@keithnoneya 8 лет назад

LOL, Hope it helped brotha. Best Wishes n Blessings Keith

@P4INCOMM4NDO 8 лет назад

Just a word of caution, its not the best idea to jack it by the differential, on the front drivers side I use the U plate. Yes is angled but if you put your finger back behind there its a thick plate. If you do have to jack it by the pumpkin make sure you arent putting any stress on the seals. I heated my bolts up cuz blaster wasnt working, melted that little plate that keeps the nut from moving. . . Also broke one of the hangers on the rear. Anyhow thanks for the video

@keithnoneya 8 лет назад

Wow that's a real bummer, glad it all worked out. I suppose you're right on the pumpkin, but I've been jacking up vehicles by the pumpkin for years and have never had a problem. I guess there's always a chance that the pumpkin or axle tubes could bend. Thanks for the tip and comment just the same. Best Wishes n Blessings Keith

@orvieburkholder9962 7 лет назад

I also highly discourage jacking up by the pumpkin

@pdufusc 6 лет назад

been mech'n 55 years never had a problem with jacking on the diff! If jacking on the diff is a problem, I definitely "WOULD NOT" take that truck and go on the rocks, or 4-wheeling of road of any kind!!!!

@riversideplumbing9563 5 лет назад

P4IN COMM4NDO p

@dasteufelhund 7 лет назад

I'm going to tackle this for the first time, can you do it with out jacking it up? Once I removed the shock, what's holding up the truck from drop down on my head/ass

@keithnoneya 7 лет назад

Not sure you should do this by yourself, for safety reasons I would get a friend familiar with doing vehicle maintenance to help you. Not trying to be condescending, I just want to make sure you're safe. Vehicle maintenance can be deadly if you're not familiar with all the safety issues involved. It's not worth it to get a crushed foot, leg, hand or have an accident because the procedure was not up to snuff. If you do decide to do this by yourself, which I don't recommend, see your service manual, usually a Haynes or a Chiltons. They usually have great advice and you can get them at most automotive stores. They cost around $25.00 and they'll help get up to speed on the safety issues. I make these videos for entertainment purposes or for those who are familiar with vehicle repairs. I have to say entertainment because I can't be there to watch and guide everyone who might do this. Vehicle maintenance can be a lot of fun but it can also get you into a dangerous or deadly situation if you something wrong. So always play it safe, if you know what you're doing it's pretty safe but if not get someone to help you who is. It's best to get someone to teach you. Especially when it comes to Suspension, Brakes and fuel related items, oh and airbag systems too. Hope this guides you in the right direction. Play it SAFE! Best Wishes n Blessings. Kieth PS feel free to ask any questions I will always try to give you the best answer I can. Someone taught me too, my dad, and some friends along the way. Again BWnB. Keith

@OriginalWhiteDevil 3 года назад

yes. you can remove the shock without jacking up the truck. shocks do not support the weight of the truck. They dampen the springs so the ride stiffens and you're not bouncing around. It's advised to jack up the truck though and remove the tire because it will allow for more room to take off the old shock and install the new one.

@capt.markgore138 8 лет назад

Nice Video Bro! Have a 2002 7.3 Thank You!!

@keithnoneya 8 лет назад

Your welcome Sir. I have some more videos in the works. I just did one on repairing the overhead compass & MPG display, though I haven't posted it yet. I'll also be doing one on changing the ICP soon as mine leaks. so check out the other ones and check back from time to time as I post a few truck vids a year as I do maintenance on it. Thanks for watching, Cap. Best Wishes n Blessings Keith

@marcuschester9771 7 лет назад

hay is the rear as easy as the front?

@keithnoneya 7 лет назад

Yes except you have to remove the spare tire. I haven't done a video on that yet but there are plenty on line. Thanks for the question. Best Wishes n Blessings. Keith

@kaimikekahuna 5 лет назад

Easier

@bryceholmes5178 8 лет назад

I'll be doing this exact set up this week. thanks for the video. Any mods done to the 7.3?

@keithnoneya 8 лет назад

+bryce holmes Pulled the plunger out of the fuel filter assembly, pulled the center seat and console out and it has a DVD Player in place of the radio and Screen on the roof and added smoked 2004 headlight assemblies, I think that's it. How about yours?

@bryceholmes5178 8 лет назад

+Keith Noneya cat and muffler delete. foil delete on the intake tube. napa 6637 air filter. otherwise it's unmolested. looking into a hydra php tuner, but with 230,XXX on the clock, I'm a tad nervous with the transmission. 02 ccsb.

@keithnoneya 8 лет назад

+bryce holmes ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_j6XqU9uMLAT.htmlry this guy he does the 7.3L and others for a living. He has the best information on Ford diesels I've ever seen so check out his channel. It's called powerstrokehelp before doing to many mods. He may have done it and give you the pros and cons on it. ru-vid.com/show-UCQz2vFEc1m-WGKf6g-pz9DA When you get to his channel type in 7.3 in the channels search block. Best Wishes n Blessings Keith

@bryceholmes5178 8 лет назад

I also did the 03+ mirrors with the heat and trurn signals. I'm a subscriber of his and have watched EVERY video he's put out. Good luck with your rig.

@keithnoneya 8 лет назад

+bryce holmes Thanks Bryce you too. You should put up some vids on your truck. I'm pretty new to YT as compared to most but I like to dabble in helping folks with the vids. They're not fancy like some but what's important is there. Editing and writing a useful comment with part numbers and tools etc. takes most of the time but it's nice to see a finished vid, a thumbs up and have someone say it helped. Thanks for the comments and I'll catch ya on the side. I only put vids out when I've got the time to do them. I did one on the overhead MPG/Compass electronic assembly on how to repair it, but it's not edited yet so i haven't posted it. I keep meaning to finish it but I can't get Windows Movie Maker to work on my new laptop. So I may have to do it on the Mrs. laptop. Well gotta crash you know that work thing early in the morn so Best Wishes n Blessings Keith

@chuckonwhidbey 8 лет назад

Thanks for showing me what I've got myself into. I can't believe they wanted $400 in labor for doing all 4 shocks!

@keithnoneya 8 лет назад

+chuckonwhidbey Whidbey Island?

@chriswarrick6538 7 лет назад

shockwarehouse.com says this on Fords....kind of makes sense since this brings the emblem upright and puts the drain holes down..

@F3502000 8 лет назад

Looking at putting those Reflex shocks on mine as well...like em? Great video!

@keithnoneya 8 лет назад

They seem to do the job just fine, so I guess you could say I like them. With that said I haven't pulled a trailer or overloaded the bed yet while using them, just highway driving so far. Thanks for the comment, say hi to Fred for me, LOL. Best Wishes n Blessings Keith

@F3502000 8 лет назад

I put them on my truck and like them a lot! Your video really came in handy and pretty much went the exact same way down to the plastic retainer getting stuck in the bottom mount. Too funny! :-D

@keithnoneya 8 лет назад

LOL that's funny. Glad the video helped, that's why I made it, as I couldn't find a good one for my year on YT. If you'ld like to help me, give me a thumbs up it does help my channel. Also if you subscribe you'll see the latest F350 videos I put up from time to time. I'm working on one on how to fix the overhead MPG/Compass display that breaks. I show parts and how to permanantly fix it. Thanks for watching. Best Wishes n Blessings Keith

@michaelhersh9303 8 лет назад

This was the video that introduced me to your channel. Not sure if you have one for the rear shocks and sway brace bushings and links...thats my next task on my truckm. Great videos!

@keithnoneya 8 лет назад

Hi Michael nope sorry I don't have those videos yet. I have the shocks in the garage and I've been thinking on doing it soon. The front shock video is one of my most popular by time on YT to views. For the rear shocks try this guys video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5oDtNvOTm_M.html Thanks for watching Michael. Best Wishes n Blessings Keith

@josephrushing2571 4 года назад

CEO OF JUST USE YOUR STUBBY

@keithnoneya 4 года назад

Amen Joe!!!! Thanks for the laugh. Best Wishes & Blessings. Keith Noneya

@jasonl7609 3 года назад

You missing your steering stabilizer for a reason???

@keithnoneya 3 года назад

I guess so, it wasn't on the truck when I got it. However I've never had a problem with death wobble or any steering issues with the truck since I've owned it. I thought about putting one on, but considering I don't have any issues it seemed like that could be a waste of money. So I chose not the spend the money and just leave it as is. Thanks for watching. Best wishes & Blessings. Keith Noneya

@DavidMorales-cl6ri 8 лет назад

would this be similar to changing the front shocks of a 2000 Ford explorer

@keithnoneya 8 лет назад

+David Morales I really don't know. I do know that they have similar suspensions. The way I found out if it will fit a vehicle is I look up the part on ebay or Amazon or a Auto Parts Store to see if it fits in the same family or model of vehicle. If in doubt look up the part number I've listed in the comments and see if it's interchangeable, then remove the front tire and look to see if it's mounted the same way, if it is then I would say yes. Good luck with it David hope my suggestions lead you to the answer you're looking for. Best Wishes n Blessings.

@ernsol764 6 лет назад

Good job budd!

@gideon360 5 лет назад

One handed... nice.

@keithnoneya 5 лет назад

Glad to help. Best Wishes & Blessings. Keith Noneya

@hilbly38t 7 лет назад

Nice job ......Thanks

@keithnoneya 7 лет назад

No problem J, thanks for the nice comment. Best Wishes n Blessings. Keith

@ericblaze5242 5 лет назад

Good stuff

@keithnoneya 5 лет назад

Thanks Eric. Best Wishes n Blessings. Keith Noneya

@MegaSlugger11 6 лет назад

well i hope someone sees this is that normal for the front leafs

@keithnoneya 6 лет назад

Hi GS, I've had this truck for about 6 years and so far It sits level, tracks fine down the road and the bow has not changed. If you find where it's not fine drop me a comment with the reference and i'll check it out. Thanks for watching. Best Wishes n blessings. Keith Noneya

@MegaSlugger11 6 лет назад

well im just trying to figure out some things about my truck. its my first diesel and first bigger truck im just curious as to why the front leafs are almost level or at least they look to be in the video. also my truck has 5 front leafs so i dont know if it has a lift or if the other person just never replaced leafs and kept adding. i dont know man lots of questions.

@keithnoneya 6 лет назад

Hey GS one of the best Power Stroke people on YT is Bill Hewlett he has a channel called PowerStrokeHelp. I highly recommend going to his channel and typing 7.3 in his search at the top right of his home page. Then just start watching, you will learn a lot about your truck in a very short time. Of course, watch my videos on my F350, you'll get to see the most things that go wrong with it and how to fix it simply. Bill has so many subscribers he usually doesn't answer anyone. So if you have a question drop me a line and I'll try and find you the correct answer or at least point you in the right direction. Thanks for watching. Best Wishes n Blessings. Keith Noneya PS Happy Wheeling!

@rolandogarza4378 6 лет назад

Thanks you very much

@keithnoneya 6 лет назад

Most welcome Mr. Garza. Best Wishes n Blessings. Keith Noneya

@arethouready 6 лет назад

What brand wheels are those

@keithnoneya 6 лет назад

MB Motoring BLITZ, I'm pretty sure they're not made anymore but I've seen them on eBay from time to time. Just make sure and get the 8X170mm lug pattern, at least I think it's the 170mm pattern, measure it to make sure. I'm not sure on the offset, so check with a tire shop before you purchase them. Hope that helps. They were on the truck when I got it. Thanks for watching. Best Wishes n Blessings. Keith Noneya

@azcharlie2009 6 лет назад

The manual says expressly NOT to use the differential for a jack point.

@keithnoneya 6 лет назад

Hi AZ Charlie 2009. I looked it up in my Haynes maintenance manual and I found the jacking section and points. I read it and it didn't say it couldn't be used. I cold see possibly why on the 7.3 as it's a very heavy engine. However I've been using the pumpkin/differential for a jacking point for 30 plus years on vehicles and have never had a problem on any vehicle I've done that on. I use that point on the truck for the reasons mentioned in order to put the jack stands in. I do use those suggested jack points for the jack stands to support the vehicle for maintenance. Thanks for the comment and watching, I do hope other than the jack points the video was helpful to you. Best Wishes n Blessings. Keith Noneya

@swamparcher14 3 года назад

Torque wrench is not a breaker bar

@keithnoneya 3 года назад

Lol the old one in my garage is. It's the cheapest long 1/2" ratchet you can buy. Also if you set it on the highest setting and then use it as a ratchet it won't hurt it. But have to remember to set it high before you use it as such and you must remember to set it at the lowest setting before you store it, or yes you can permanently damage it. I've used my old one that way for decades and took it to an actual calibration shop and it was just fine. I do have a new one that I don't treat that way tough. Thanks for caring enough to mention it. Best Wishes & Blessings.

@curtisbell2227 8 лет назад

would bad shocks cause a rattleing noise on bumps

@keithnoneya 8 лет назад

Very unlikely unless the mounts are loose or internally they are broken. Usually when they go bad your truck or car will bounce up and down a lot. Kinda like Uncle Bucks car, movie reference there but very true. I had a similar problem with my truck it turned out to be two things. The Sway Bar bushings and the Sway Bar Links. See the Super EASY Bushing Replace here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zVTJwUBHiBo.html Other usual causes are the Tie Rod ends and the Drag Links. I've replaced all of those on my truck and that fixed the problem. Feel free to ask any other questions if i'm on line i'll do my best to answer them. I don't have a lot of videos on my truck but what I do have is in my play list here: ru-vid.com/group/PLVLXGvrQp0OtT4QJeMKZ764rC2A87eiXz Best Wishes n Blessings keith

@curtisbell2227 8 лет назад

Thank you very much

@vaiisgod8 7 лет назад

I don't pull the tire off or jack it up

@josephmcclary9667 5 лет назад

And you weren’t filming a video with a need to show what’s going on.

@cipherion 5 лет назад

Thx

@chriswarrick6538 7 лет назад

My Bilstiens mount boot down...good video though.

@keithnoneya 7 лет назад

I've never seen someone mount them upside down/boot down. That would have oil sitting on the seals the whole time. If you have an example of this and why, i'd like to see a link to that for the knowledge. Thanks for the comment. Best Wishes n Blessings. Keith

@Siskiyous6 5 лет назад

That is a torque wrench not a breaker bar

@keithnoneya 5 лет назад

LOL, it is for me. Those CHEAP Torque wrenches cost way less than ANY 1/2" breaker bar or 1/2" Ratchet. The trick is you HAVE to set it at the highest setting OR you COULD damage it. I wouldn't do this to an expensive torque wrench, that would be kinda stupid. I used a cheap one for 10 years in the manner I said. I took it to my friends Calibration Lab and he said it was still within specifications. So can you hurt it, maybe it depends on how you use it. If it couldn't take it reliably at a high setting anyways it wouldn't be much of a torque wrench would it? So for expensive torque wrenches, NO it probably wouldn't hurt it, but I wouldn't want to find out. For a cheapy, YES man use what works best for you. Thanks for the comment. I get that one a lot, from folks who don't know the trick to it! Best Wishes & Blessings. Keith Noneya

@Integrity_gaming 3 года назад

Mine got a spring

@keithnoneya 3 года назад

If it has a spring it's probably not a 2001 or it's not a 4wd. As long as the connection points are the same it's pretty simple to do. Let me know if there's anything I can do for you. Thanks for watching. Best Wishes & Blessings. Keith Noneya

@Hvytx 8 лет назад

Never use a torque wrench as a breaker bar.

@keithnoneya 8 лет назад

Yep, I agree with you that's why I put it at the highest setting, so it will never exceed the max torque on the wrench. I like the ratchet portion of it and if it does wear out then I just buy a new one as it's a cheap one. Besides I've been doing it that way for over 25 years, along with some friends, and have NEVER had an issue with it. That torque wrench in the video is over 20 years old. Thanks for the concern but unless it's a really expensive torque wrench I always prefer the convenience over the safety of the tool. Best Wishes n Blessings Keith

@nikolaosdimitropoulos4634 3 года назад

Where’s the rest of your leaf pack? Lol

@keithnoneya 3 года назад

That's what came on the truck when I got it. I did buy it used though so I guess either it's missing or it's stock for that year and model. Rides fine though. Best Wishes & Blessings. Keith Noneya

@nikolaosdimitropoulos4634 3 года назад

@@keithnoneya I’ll bet it rides like a fucking Cadillac mines a 2000 Ford F2 50 and I’ve got probably four or five more leaves on it I was thinking about pulling some out

@keithnoneya 3 года назад

@@nikolaosdimitropoulos4634 Hey Nickolaos, yeah the front rides good but the back is still really rough. Yeah these trucks were made to work not to be comfortable. Of course when I'm on a good smooth road it doesn't make any difference. Unfortunately I live in southern Louisiana where the roads are crap, except the freeways, most of the time. Best Wishes & Blessings on your truck bud. Keith Noneya